Preparation and Performance of Sleeve Grouting Material Modified with Polymer Emulsion for Prefabricated Buildings

Abstract

Abstract: In this study, two kinds of polymer emulsion-modified sleeve grouting materials were prepared with vinyl acetate-ethylene copolymerization emulsion (EVA) and acrylate emulsion (PAE), respectively. The effects of polymer emulsion on the fluidity, compressive strength, water absorption, expansion rate, durability, tensile property and microstructure of the sleeve grouting material were investigated and its cost accounting was executed. The results show that polymer emulsion can significantly improve the fluidity, compressive strength, water absorption, sulfate resistance and freeze thaw resistance of grouting materials, and the comprehensive properties of PAE modified sleeve grouting materials are better than EVA modified ones. PAE modification enhances the overall cohesion and density of grouting material, ensuring that the expansion rate of the grouting material has little negative impact and no bleeding phenomenon. At the same time, it can enhance the tensile performance, tensile strength, and bonding strength of grouting material joint. When the PAE content is between 0.3% and 1.0% (mass fraction), the performance of PAE modified grouting material meets the corresponding national standard requirements, and the preparation cost is relatively low.

Key words: prefabricated building, sleeve grouting material, polymer emulsion, tensile property of grouting joint, fluidity, compressive strength

CLC Number:

TU528.41

FU Wanwan, LAO Jiayue, GUO Keyu, CHEN Liuwei, WU Shifang, ZHOU Wei, TAN Xiaoming, PENG Hao. Preparation and Performance of Sleeve Grouting Material Modified with Polymer Emulsion for Prefabricated Buildings[J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(3): 833-843.

References

[1] 山东省市场监督管理局. 装配式建筑预制混凝土构件制作与验收标准: DB37/T 5020—2023[S]. 济南: 中国建筑工业出版社, 2023.
Shandong Market Supervision Administration. Fabrication and acceptance standards of precast concrete components in prefabricated buildings: DB37/T 5020—2023[S]. Jinan: China Building and Construction Press, 2023 (in Chinese).
[2] LIU H T, CHEN J N, XU C S, et al. Seismic performance of precast column connected with grouted sleeve connectors[J]. Journal of Building Engineering, 2020, 31: 101410.
[3] PENG H, LIU L J. Study on the preparation and properties of new sleeve grouting material for prefabricated building[J]. Earth and Environmental Science, 2021, 676: 012044.
[4] SHU X J, ZHAO Y, LIU Z, et al. A study on the mix proportion of fiber-polymer composite reinforced cement-based grouting material[J]. Construction and Building Materials, 2022, 328: 127025.
[5] WANG J C, ZHOU J H, PAN M X, et al. Experimental study on bond slip relationship of steel sleeve[J]. MATEC Web of Conferences, 2016, 63: 03012.
[6] ZHENG Y F, GUO Z X, MING X E. Pullout bond properties of grout-filled mechanical splice for precast concrete construction[C]//Proceedings of the 5th International Conference on Civil Engineering and Transportation 2015. November 28-29, 2015. Guangzhou, China. Paris, France: Atlantis Press, 2015: 5: 1078-1081.
[7] 石鑫, 徐玲玲, 冯涛, 等. 水分散聚合物乳液改性水泥砂浆的研究进展[J]. 硅酸盐通报, 2021, 40(8): 2497-2507.
SHI X, XU L L, FENG T, et al. Research progress of water dispersed polymer emulsion modified cement mortar[J]. Bulletin of the Chinese Ceramic Society, 2021, 40(8): 2497-2507 (in Chinese).
[8] 王敏. 高性能水泥基材料的性能及机理研究[D]. 西安: 西北工业大学, 2018: 37-52.
WANG M. Study on properties and mechanism of high performance cement-based materials[D]. Xi'an: Northwestern Polytechnical University, 2018: 37-52 (in Chinese).
[9] 吴世芳, 付弯弯, 任皓, 等. 套筒灌浆料性能影响因素的研究[J]. 武汉轻工大学学报, 2022, 41(1): 58-63.
WU S F, FU W W, REN H, et al. Study on influencing factors of performance of sleeve grouting material[J]. Journal of Wuhan Polytechnic University, 2022, 41(1): 58-63 (in Chinese).
[10] 中华人民共和国住房和城乡建设部. 钢筋连接用套筒灌浆料: JG/T408—2019[S]. 北京: 中国建筑工业出版社, 2019.
Ministry of Housing and Urban-Rural Development of the People's Republic of China. Cementitious grout for sleeve of rebar splicing: JG/T408—2019[S]. Beijing: China Architecture & Building Press, 2019 (in Chinese).
[11] 北京市质量技术监督局, 北京市住房和城乡建设委员会. 钢筋套筒灌浆连接技术规程: DB11/T 1470—2017[S]. 北京: 中国建筑工业出版社, 2017.
Beijing Municipal Bureau of Quality and Technical Supervision, Beijing Municipal Commission of Housing and Urban-Rural Development. Technical specification of reinforcement sleeve grouting connection: DB11/T 1470—2017[S]. Beijing: China Architecture and Construction Press, 2017 (in Chinese).
[12] 中华人民共和国住房和城乡建设部. 建筑砂浆基本性能试验方法标准: JGJ/T 70—2009[S]. 北京: 中国建筑工业出版社, 2009.
Ministry of Housing and Urban-Rural Development, People's Republic of China. Standard of basic performance test method for building mortar: JGJ/T 70—2009[S]. Beijing: China Architecture and Construction Press, 2009 (in Chinese).
[13] 洪斌. 装配式建筑用套筒灌浆料的制备及应用研究[D]. 南京: 东南大学, 2017: 78-80.
HONG B. Study on preparation and application of sleeve grouting material for prefabricated buildings[D].Nanjing: Southeast University, 2017: 78-80 (in Chinese).
[14] 梁美坤. 聚合物改性水泥基微孔透水材料的制备试验研究[D]. 重庆: 重庆大学, 2022: 46-55.
LIANG M K. Experimental study on preparation of polymer modified cement-based microporous permeable material[D].Chongqing: Chongqing University, 2022: 46-55 (in Chinese).
[15] MÜLLER I. Infiuence of cellulose ethers on the kinetics of early Portland cementhydration[D]. Northrhine-Westphalia: Westflische Wilhelms-Universitt Münster, 2006: 1-15.
[16] HADI A, AMIR S, HOSSEIN H, et al. The effect of styrene-butadiene rubber and ethylene vinyl acetate polymers on the mechanical properties of Engineered Cementitious Composites[J]. Composites Communications, 2021, 24: 100656.
[17] 李蓓, 田野, 赵若轶, 等. 聚丙烯酸酯乳液改性砂浆微观结构与改性机理[J]. 浙江大学学报(工学版), 2014, 48(8): 1345-1352+1361.
LI B, TIAN Y, ZHAO R Y, et al. Microstructure and modification mechanism of polyacrylate latex modified mortars[J]. Journal of Zhejiang University (Engineering Science), 2014, 48(8): 1345-1352+1361 (in Chinese).
[18] KNAPEN E, VAN G D. Cement hydration and microstructure formation inthe presence of water-soluble polymers[J]. Cem Concr Res, 2009, 39(1): 6-13.
[19] 芦令超, 李云超, 王守德, 等. 聚合物改性硫铝酸盐水泥抗硫酸盐侵蚀性能[J]. 建筑材料学报, 2009, 12(6): 631-634+655.
LU L C, LI Y C, WANG S D, et al. Resistance to sulphate attack of polymer modified sulphoaluminate cement[J]. Journal of Building Materials, 2009, 12(6): 631-634+655 (in Chinese).
[20] 潘铖, 郑志明, 杨逾. 矿化煤矸石混凝土抗硫酸盐侵蚀性能研究[J/OL]. 长江科学院院报, 2023(3): 1-8 (2023-10-25) [2023-12-01]. http://kns.cnki.net/kcms/detail/42.1171.TV.20231024.1708.006.html.
PAN C, ZHENG Z M, YANG Y. Research on sulfate resistance of microbial mineralized coal gangue concrete[J/OL]. Journal of Yangtze River Scientific Research Institute, 2023(3): 1-8 (2023-10-25) [2023-12-01]. http://kns.cnki.net/kcm s/detail/42.1171.TV.20231024.1708.006.html (in Chinese).
[21] 余琼, 孙佳秋, 袁炜航. 带肋钢筋与套筒约束灌浆料黏结性能试验[J]. 哈尔滨工业大学学报, 2018, 50(12): 98-106.
YU Q, SUN J Q, YUAN W H. Experimental study on bond behavior between ribbed steel bars and sleeve constrained grouting material[J]. Journal of Harbin Institute of Technology, 2018, 50(12): 98-106 (in Chinese).
[22] 百年建筑. 建筑材料价格表信息[EB/OL]. [2023-11-30]. https://www.100njz.com/.
Centennial Building. Building materials price list information search sit[EB/OL]. [2023-11-30]. https://www.100njz.com/ (in Chinese).
[23] 阿里巴巴. 聚合物乳液批发[EB/OL]. [2023-11-30]. https://www.1688.com/.
Ali Baba. Copolymerization emulsion wholesale[EB/OL]. [2023-11-30]. https://www.1688.com/ (in Chinese).