Welcome to Visit BULLETIN OF THE CHINESE CERAMIC SOCIETY! Today is

BULLETIN OF THE CHINESE CERAMIC SOCIETY ›› 2023, Vol. 42 ›› Issue (11): 3978-3987.

Special Issue: 资源综合利用

Previous Articles     Next Articles

Preparation and Properties Characterization of Neutralization Slag Based Geopolymers

LAI Jin1, LUO Qi1, WANG Wenyao1, HUANG Wenhao1, LIU Fengyue1, ZHUANG Rongchuan2, WANG Junfeng1   

  1. 1. College of Civil and Transportation Engineering, Shenzhen University, Shenzhen 518060, China;
    2. State Key Laboratory of Comprehensive Utilization of Low-Grade Refractory Gold Resources,Longyan 364200, China
  • Received:2023-06-13 Revised:2023-08-02 Online:2023-11-15 Published:2023-11-22

Abstract: Neutralization slag (NS) is an industrial waste residue with calcium sulfate as the main component produced by mineral mining and metallurgical treatment processes. The large accumulation and storage of NS will pose a great threat to the environment. Therefore, it is urgent to explore a new technology for recycling NS. The mechanical properties of NS based geopolymers with different granulated blast furnace slag (GBFS) blending levels were investigated, and the phase composition, hydration rate, pore structure and micromorphology of the NS geopolymer were characterized by X-ray diffraction, reaction heat testing, mercury intrusion porosimetry, Fourier-transform infrared spectroscopy testing and scanning electron microscopy. The results show that the main product of the geopolymerisation between NS and GBFS under the action of activator is C(N)-A-S-H gel. The incorporation of GBFS can increase the rate of polymerization reaction, generate more geopolymer gels, make the microstructure of NS based geopolymer denser and the mechanical properties higher. The 28 d compressive strength of the NS based geopolymer with 30%(mass fraction) granulated blast furnace slag can reach 17.8 MPa.

Key words: geopolymer, neutralization slag, granulated blast furnace slag, compressive strength, pore structure, microstructure

CLC Number: