Welcome to Visit BULLETIN OF THE CHINESE CERAMIC SOCIETY! Today is

BULLETIN OF THE CHINESE CERAMIC SOCIETY ›› 2024, Vol. 43 ›› Issue (2): 584-592.

Special Issue: 资源综合利用

• Solid Waste and Eco-Materials • Previous Articles     Next Articles

New Method and Effect Verification for Synthesizing Sodalite from Fly Ash Using Solvent-Free Method

GUO Wei1, PANG Laixue1, WANG Wenchao2, ZHANG Jiali1, WANG Hua3, BAI Shuxia1   

  1. 1. College of Transportation Civil Engineering, Shandong Jiaotong University, Jinan 250357, China;
    2. Center of Forecasting and Analysis of the Fifth Prospecting Team of Shandong Coal Geology Bureau, Jinan 250100, China;
    3. Shandong Institute for Product Quality Inspection, Jinan 250100, China
  • Received:2023-09-12 Revised:2023-11-09 Online:2024-02-15 Published:2024-02-05

Abstract: Due to its high silicon and aluminum content, low silicon and aluminum ratio, fly ash is often used to synthesize low silicon pure phase sodalite. In order to improve the high-value utilization of fly ash, sodalite was synthesized from fly ash using solvent-free method. The effects of ash-alkali ratio, crystallization time and crystallization temperature on sodalite phase formation, microstructure and crystallinity were studied. The results show that crystaline pristine sodalite is prepared from fly ash with ash-alkali ratio of 1∶0.8 (mass ratio), crystallization time of 16 h and crystallization temperature of 160 ℃. The ash-alkali ratio has a significant effect on relative crystallinity. The synthesized sodalite has microporous and mesoporous composite pore structure. The N2 adsorption-desorption isotherm of sodalite isotherm reveals a typical IV isotherm with a type III hysteresis loop. Sodalite has high aluminum content, and has good thermal stability. Compared with the hydrothermal method for synthesizing sodalite, this experimental method utilizes fly ash with high efficiency, and provides a new way for the utilization of fly ash.

Key words: fly ash, sodalite, solvent-free method, synthetic mechanism, pore structure, thermal stability

CLC Number: