Mechanical Properties and Chloride Ion Penetration Resistance of BFHSM after High Temperature

doi:10.16552/j.cnki.issn1001-1625.2024.1307

Abstract

Abstract: Basalt fiber reinforced high-strength mortar (BFHSM) has a bright prospect of applications in engineering due to its lightweight, high strength, and great durability. The mechanical properties and durability after high temperature are important indicators for evaluating structural safety performance. In this paper, the effect of temperature (20, 100, 150, 200, 250, 300, 350, 400 ℃) on the mechanical properties and the chloride ion penetration resistance of BFHSM with basalt fiber (BF) content of 0% (volume fraction, the same below) and 1.0% were investigated by high temperature test, compressive strength test, splitting tensile strength test, XRD analysis, and chloride ion penetration resistance test. The results show that the compressive strength and splitting tensile strength of BFHSM increase first and then decrease, and the compressive strength and splitting tensile strength can be improved with BF. XRD results indicate that the hydrated calcium silicate (C-S-H) gel, dicalcium silicate (C₂S) and tricalcium silicate (C₃S) in BFHSM matrix gradually decrease after the temperature exceeds the critical temperature, which is the main reason for the decrease in compressive strength of BFHSM. Also, the incorporation of BF can improve the chloride ion penetration resistance of BFHSM. Compared with the control group, the electric flux of BFHSM decreases by 19.82%, 5.33%, 7.61%, and 2.21% after 20, 100, 200 and 300 ℃, respectively. Moreover, the chloride ion penetration resistance of BFHSM decreases with the increase of temperature.

Key words: high-strength mortar, basalt fiber, high temperature, compressive strength, splitting tensile strength, electric flux

CLC Number:

TU528

GAO Yonghong, LI Jiahao, JIN Qingping, PENG Mengmi. Mechanical Properties and Chloride Ion Penetration Resistance of BFHSM after High Temperature[J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2025, 44(6): 2016-2025.

References

[1] 何倍, 张红恩, 朱新平, 等. 高温环境下超高性能混凝土力学性能及劣化机制研究进展[J]. 硅酸盐学报, 2024, 52(11): 3470-3481.
HE B, ZHANG H E, ZHU X P, et al. Review on mechanical properties and degradation mechanism of ultra-high performance concrete in elevated environment[J]. Journal of the Chinese Ceramic Society, 2024, 52(11): 3470-3481 (in Chinese).
[2] 郑文忠, 侯晓萌, 王英. 混凝土及预应力混凝土结构抗火研究现状与展望[J]. 哈尔滨工业大学学报, 2016, 48(12): 1-18.
ZHENG W Z, HOU X M, WANG Y. Progress and prospect of fire resistance of reinforced concrete and prestressed concrete structures[J]. Journal of Harbin Institute of Technology, 2016, 48(12): 1-18 (in Chinese).
[3] DAWOOD E T, RAMLI M. High strength characteristics of cement mortar reinforced with hybrid fibres[J]. Construction and Building Materials, 2011, 25(5): 2240-2247.
[4] LU L M, HAN F, WU S H, et al. Experimental study on durability of basalt fiber concrete after elevated temperature[J]. Structural Concrete, 2022, 23(2): 682-693.
[5] YILDIRIM M, ÖZHAN H B. Durability properties of basalt fiber-reinforced mortars with different mineral admixtures exposed to high temperatures[J]. Construction and Building Materials, 2023, 400: 132574.
[6] AYDIN S, YAZICI H, BARADAN B. High temperature resistance of normal strength and autoclaved high strength mortars incorporated polypropylene and steel fibers[J]. Construction and Building Materials, 2008, 22(4): 504-512.
[7] JU Y, WANG L, LIU H B, et al. An experimental investigation of the thermal spalling of polypropylene-fibered reactive powder concrete exposed to elevated temperatures[J]. Science Bulletin, 2015, 60(23): 2022-2040.
[8] 黄加圣, 杨鼎宜, 朱振东, 等. 高温后聚乙烯醇纤维混凝土受压破坏声发射特性研究[J]. 混凝土, 2019(1): 47-51+56.
HUANG J S, YANG D Y, ZHU Z D, et al. Study on acoustic emission characteristics of polyvinyl alcohol fiber concrete compression damage after high temperature[J]. Concrete, 2019(1): 47-51+56 (in Chinese).
[9] SINGHA K. A short review on basalt fiber[J]. International Journal of Textile Science, 2012, 1(4): 19-28.
[10] XU M F, SONG S, FENG L, et al. Development of basalt fiber engineered cementitious composites and its mechanical properties[J]. Construction and Building Materials, 2021, 266: 121173.
[11] AKYUNCU V. Basalt powder dependent properties of mortars subjected to high temperatures[J]. Journal of the Croatian Association of Civil Engineers, 2019, 71(7): 571-578.
[12] 郭子荣, 杨鼎宜, 曹忠露, 等. 混掺纤维水泥砂浆的高温性能研究[J]. 硅酸盐通报, 2024, 43(3): 851-865.
GUO Z R, YANG D Y, CAO Z L, et al. High temperature performance of blended fiber cement mortar[J]. Bulletin of the Chinese Ceramic Society, 2024, 43(3): 851-865 (in Chinese).
[13] KOKSAL F, KOCABEYOGLU E T, GENCEL O, et al. The effects of high temperature and cooling regimes on the mechanical and durability properties of basalt fiber reinforced mortars with silica fume[J]. Cement and Concrete Composites, 2021, 121: 104107.
[14] VAEZI M, SEDAGHATDOOST A, NOROUZIFAR M N, et al. Petrographic investigation into the influence of chopped basalt fibers on the microstructure of Portland cement mortars at elevated temperatures[J]. Journal of Materials in Civil Engineering, 2021, 33(5): 04021078.
[15] 杨立云, 林长宇, 张飞, 等. 玄武岩纤维对活性粉末混凝土受压破坏的影响[J]. 建筑材料学报, 2022, 25(5): 483-489.
YANG L Y, LIN C Y, ZHANG F, et al. Effect of basalt fiber on failure of reactive powder concrete under uniaxial compression[J]. Journal of Building Materials, 2022, 25(5): 483-489 (in Chinese).
[16] 傅宇方, 黄玉龙, 潘智生, 等. 高温条件下混凝土爆裂机理研究进展[J]. 建筑材料学报, 2006, 9(3): 323-329.
FU Y F, HUANG Y L, et al. Literature review of study on mechanism of explosive spalling in concrete at elevated temperatures[J]. Journal of Building Materials, 2006, 9(3): 323-329 (in Chinese).
[17] 龚建清, 邓国旗, 单波. 活性粉末混凝土高温后超声研究及微观分析[J]. 湖南大学学报(自然科学版), 2018, 45(1): 68-76.
GONG J Q, DENG G Q, SHAN B. Ultrasonic test and microscopic analysis of reactive powder concrete exposed to high temperature[J]. Journal of Hunan University (Natural Sciences), 2018, 45(1): 68-76 (in Chinese).
[18] 李海艳. 活性粉末混凝土高温爆裂及高温后力学性能研究[D]. 哈尔滨: 哈尔滨工业大学, 2012.
LI H Y. Experimental study on spalling behaviour and mechanical properties of reactive powder concrete after elevated temperatures[D]. Harbin: Harbin Institute of Technology, 2012 (in Chinese).
[19] 吕天启, 赵国藩, 林志伸, 等. 高温后静置混凝土的微观分析[J]. 建筑材料学报, 2003, 6(2): 135-141.
LU T Q, ZHAO G F, LIN Z S, et al. Microscopic analysis of long standing concrete after high temperature[J]. Journal of Building Materials, 2003, 6(2): 135-141 (in Chinese).