欢迎访问《硅酸盐通报》官方网站,今天是
分享到:

硅酸盐通报 ›› 2024, Vol. 43 ›› Issue (2): 673-681.

所属专题: 陶瓷

• 陶瓷 • 上一篇    下一篇

气藏型低密度陶粒支撑剂的制备与性能研究

邢莉1, 孙晓思1, 白频波2, 王凯悦3, 田玉明3   

  1. 1.山西工程职业学院,太原 030001;
    2.阳泉市长青石油压裂支撑剂有限公司,阳泉 045200;
    3.太原科技大学材料科学与工程学院,太原 030024
  • 收稿日期:2023-09-18 修订日期:2023-11-21 出版日期:2024-02-15 发布日期:2024-02-05
  • 通信作者: 孙晓思,副教授。E-mail:sxs8696@163.com
  • 作者简介:邢莉(1988—),女。主要从事结构陶瓷及复合材料方面的研究。E-mail:13682151139@163.com
  • 基金资助:
    晋城市重点研发项目(20220102);阳泉市科技重大专项(2022JH004);教育部高等学校科学研究发展中心《虚拟仿真技术在职业教育教学中的创新应用》专项课题(ZJXF2022070)

Preparation and Performance of Gas Reservoir Ceramic Proppant with Low Density

XING Li1, SUN Xiaosi1, BAI Pinbo2, WANG Kaiyue3, TIAN Yuming3   

  1. 1. Shanxi Engineering Vocational College, Taiyuan 030001, China;
    2. Changqing Fracturing Proppant Co., Ltd., Yangquan 045200, China;
    3. School of Materials Science and Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China
  • Received:2023-09-18 Revised:2023-11-21 Online:2024-02-15 Published:2024-02-05

摘要: 在开采煤层气、页岩气等气藏资源过程中,陶粒支撑剂的产品性能尤为关键,合成密度小、强度高的支撑剂是实现气藏高产率的重要指标。本文在传统矾土系陶粒支撑剂的基础上,添加煤矸石(RCG)、羧甲基纤维素钠(CMC)和白云石(DOL)进行固相烧结,借助以上造孔剂多温区的热解作用以及高温液相快速填充机制改善支撑剂的基体孔隙分布特征,降低支撑剂的结构密度并提升基体强度。当掺入质量分数为15%RCG+1%CMC+1%DOL添加剂时,支撑剂表现出最佳的综合性能并满足气藏资源开采的参数要求。

关键词: 气藏开采, 陶粒支撑剂, 多元造孔剂, 结构密度, 破碎率, 固相烧结

Abstract: In the process of extracting coalbed methane, shale gas and other gas reservoir resources, the product performance of ceramic proppants is particularly crucial. Low synthetic density and high strength of proppant are important indicators for achieving high gas reservoir productivity. On the basis of traditional ceramic proppants, by adding raw coal gangue (RCG), sodium carboxymethyl cellulose (CMC), and dolomite (DOL) for solid state sintering, the matrix pore distribution characteristics of the proppants were improved, the structural density of the proppants was reduced, and the matrix strength was enhanced, with the help of the multi temperature pyrolysis effect of the pore forming agents and the high-temperature liquid phase rapid filling mechanism. When a mass fraction of 15%RCG+1%CMC+1%DOL additive is added, the proppant exhibits the best comprehensive performance and meets the parameter requirements for gas reservoir resource extraction.

Key words: gas reservoir production, ceramic proppant, multi-pore former, structural density, breakage rate, solid state sintering

中图分类号: