欢迎访问《硅酸盐通报》官方网站,今天是
分享到:

硅酸盐通报 ›› 2024, Vol. 43 ›› Issue (4): 1359-1365.

• “玻璃材料与玻璃技术”专题(II) • 上一篇    下一篇

柔性玻璃的化学强化及其力学性能研究

毛婧怡1, 刘冰1, 郭振强2, 张家昌1, 袁坚1,2   

  1. 1.武汉理工大学硅酸盐建筑材料国家重点实验室,武汉 430070;
    2.河北省沙河玻璃技术研究院,邢台 054199
  • 收稿日期:2023-11-03 修订日期:2024-01-02 出版日期:2024-04-15 发布日期:2024-04-17
  • 通信作者: 袁 坚,博士,教授。E-mail:janeyuan@whut.edu.cn
  • 作者简介:毛婧怡(1999—),女,硕士研究生。主要从事柔性玻璃的研究。E-mail:1489970205@qq.com
  • 基金资助:
    国家重点研发计划(2022YFB3603300)

Chemical Strengthening and Mechanical Properties of Flexible Glass

MAO Jingyi1, LIU Bing1, GUO Zhenqiang2, ZHANG Jiachang1, YUAN Jian1,2   

  1. 1. State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan 430070, China;
    2. Shahe Research Institute of Glass Technology, Xingtai 054199, China
  • Received:2023-11-03 Revised:2024-01-02 Online:2024-04-15 Published:2024-04-17

摘要: 具有高弯曲强度的柔性玻璃是柔性电子显示的重要组成部分,但柔性玻璃本质是脆性材料,因此其力学性能仍然不能满足使用要求。化学强化是提高柔性玻璃弯曲半径、抗划伤性等力学性能的有效途径,本文采用一步化学强化法,将90 μm超薄高铝柔性玻璃在纯硝酸钾熔盐中进行强化,研究离子交换工艺对样品表面应力、维氏硬度及弯曲半径的影响规律。结果表明:在380 ℃进行1 h的离子交换后,样品的表面压应力达834.1 MPa,应力层深度为15.91 μm,此时玻璃具有最佳的弯曲性能和耐划伤性;经化学强化后,90 μm柔性玻璃的最小弯曲半径可由(29.8±0.73) mm降低至(6.94±0.99) mm;随着继续升高交换温度和延长时间,柔性玻璃的力学性能会有所降低。

关键词: 化学强化, 柔性玻璃, 表面应力, 离子交换深度, 弯曲半径, 维氏硬度

Abstract: Flexible glass with high bending strength is a remarkable component of flexible electronic displays. However, flexible glass is a brittle material inherently, and its mechanical properties still do not meet the requirements of application. To address this challenge, the application of chemical strengthening stands out as a viable approach to significantly bolster scratch resistance and bending strength in flexible glass. 90 μm ultra-thin high-aluminum flexible glass was reinforced in the molten potassium nitrate using a conventional one-step chemical strengthening method. The effect laws of chemical strengthening temperature and time on the surface stress, Vickers hardness and bending radius of the strengthened flexible glass were investigated. The results indicate that, after ion-exchange at 380 ℃ for 1 h, the compressive stress of sample reaches 834.12 MPa, and the depth of stress layer is 15.91 μm, at which time the glass samples have the best bending performance and scratch resistance. After chemical strengthening, the bending radiu of 90 μm flexible glass reduces from (29.8±0.73) mm to (6.94±0.99) mm. As the overly increasing exchange temperature and excessive prolongation of time, the mechanical properties of flexible glass are weakened.

Key words: chemical strengthening, flexible glass, surface stress, ion-exchange depth, bending radiu, Vickers hardness

中图分类号: