烧结制度及造孔剂用量对粉煤灰基多孔陶瓷膜支撑体性能的影响

硅酸盐通报 ›› 2017, Vol. 36 ›› Issue (3): 785-790.

烧结制度及造孔剂用量对粉煤灰基多孔陶瓷膜支撑体性能的影响

张杰;田蒙奎;张云飞

贵州大学化学与化工学院,贵阳,550025

出版日期:2017-03-15 发布日期:2021-01-18
基金资助:
贵阳国家高新区高层次人才创新创业项目资助%贵州省科技创新人才团队建设项目(黔科合人才团队(2015)4004号)%贵州省教育厅自然科学研究项目(黔教科(024))

Effect of Sintering System and Pore Former Content on the Properties of Fly Ash Based Porous Ceramic Membrane Support

ZHANG Jie;TIAN Meng-kui;ZHANG Yun-fei

Online:2017-03-15 Published:2021-01-18

摘要/Abstract

摘要： 以粉煤灰为原料,采用挤压成型和固态粒子烧结法制备管状粉煤灰基多孔陶瓷膜支撑体.采用TG-DSC技术对粉煤灰进行了热分析,采用SEM和XRD技术对样品的微观结构及物相组成进行了分析,并测定了样品的开孔率、抗压强度及空气渗透速率等性能指标.研究了烧结温度、保温时间和造孔剂添加量对支撑体性能的影响.结果表明:支撑体晶相组成主要为赤铁矿、红柱石和石英;烧结温度为1000 ℃,保温2 h,仅添加1%的粘结剂,不添加造孔剂的条件下制备出的管状支撑体综合性能最优,此时的支撑体孔隙率为44.95%,抗压强度为8.92 MPa,空气渗透速率为2.57×104 m3·h-1·m-2·MPa-1.

关键词: 粉煤灰;支撑体;多孔陶瓷膜;烧结制度

Abstract: Tubular porous ceramic membrane supports were prepared by extrusion molding and solid particle sintering method using fly ash as raw material.The thermal analysis of fly ash was determined by TG-DSC.The microstructure and phase composition of samples were analyzed by SEM and XRD.The property indexes such as the open porosity, compressive strength and air permeability were also measured.The influences of sintering temperature, holding time and pore former content on the performances of the supports were investigated.Results indicate that the phase of supports is mainly composed of hematite, andalusite and quartz.The excellent comprehensive performance tubular supports with open porosity of 44.95%, compressive strength of 8.92 MPa, and the air permeability of 2.57×104 m3·h-1·m-2·MPa-1 can be fabricated under the optimized conditions: sintering temperature being 1000 ℃, holding time of 2 h, binder of 1% and without adding pore former.

Key words: fly ash;support;porous ceramic membrane;sintering system

中图分类号:

TQ174.75

张杰;田蒙奎;张云飞. 烧结制度及造孔剂用量对粉煤灰基多孔陶瓷膜支撑体性能的影响[J]. 硅酸盐通报, 2017, 36(3): 785-790.

ZHANG Jie;TIAN Meng-kui;ZHANG Yun-fei. Effect of Sintering System and Pore Former Content on the Properties of Fly Ash Based Porous Ceramic Membrane Support[J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2017, 36(3): 785-790.

[1]	郑彧;韦中华;张阳;张跃;童亚琦;张伟儒. 多孔二氧化锆基隔热材料的制备及性能[J]. 硅酸盐通报, 2020, 39(11): 3643-3648.
[2]	安迪;杜景红;邱哲生;严继康;甘国友. 发泡剂对多孔氧化铝陶瓷孔结构和抗弯强度的影响[J]. 硅酸盐通报, 2020, 39(7): 2248-2252.
[3]	龙梅;江向平;樊刚;刘芳;苏春阳;苏雷. Pr3+掺杂对CaBi8Ti7O27陶瓷电学和光学性能的影响[J]. 硅酸盐通报, 2020, 39(5): 1594-1599.
[4]	余晓初;张辉;陆聪;王晓刚;刘国友;刘学建;黄政仁. 氮化硅陶瓷覆铜基板制备及可靠性评估[J]. 硅酸盐通报, 2020, 39(5): 1614-1619.
[5]	范芳;李生娟;范立坤. 氧化铝-莫来石高温复合陶瓷改性研究[J]. 硅酸盐通报, 2020, 39(4): 1254-1259.
[6]	陈琪;李同起;张大海;马峻峰. ZrB2材料的制备工艺与应用[J]. 硅酸盐通报, 2020, 39(3): 873-884.
[7]	樊子民;罗娟;王晓刚. 保温温度对固相烧结SiC/B4C复合陶瓷力学性能及微观形貌影响[J]. 硅酸盐通报, 2020, 39(3): 932-936.
[8]	李涛;朱鹏涛;张彬;丁凯伦;孙忠民. 硫酸盐侵蚀下混凝土内腐蚀反应-扩散过程的实验研究[J]. 硅酸盐通报, 2020, 39(1): 50-55.
[9]	张熬;亢浪浪;张印民;丁大千;张永锋. 高岭石粒度对其晶体结构和热演化行为的影响研究[J]. 硅酸盐通报, 2019, 38(12): 3964-397.
[10]	程丽乾;徐泽;王轲. 不同氧化物掺杂对KNN无铅压电陶瓷性能的影响[J]. 硅酸盐通报, 2019, 38(6): 1663-166.
[11]	华富强;刘艳涛;杨粮铭;杨光军;韦凝思;桑榆;徐晓虹. 用于隔热保温的多孔氧化铝陶瓷的制备与研究[J]. 硅酸盐通报, 2019, 38(4): 1030-103.
[12]	范丽;田蒙奎;张杰;张云飞. 温度制度及造孔剂用量对煤矸石基多孔陶瓷膜支撑体性能的影响[J]. 硅酸盐通报, 2018, 37(5): 1781-1787.
[13]	岳公冰;李秋义;张鹏;李倩倩. 不同强度等级再生混凝土多重界面结构显微硬度分析[J]. 硅酸盐通报, 2017, 36(12): 4271-4276.
[14]	杨勇法;肖汉宁;郭文明. 浸渍工艺及烧成温度对SiO2纳滤膜微观结构的影响[J]. 硅酸盐通报, 2017, 36(10): 3380-3384.
[15]	王亚飞;张帆;李军;段云彪;王开军;张维钧;胡劲. 超细硼化锆粉体纯化工艺探究[J]. 硅酸盐通报, 2017, 36(8): 2536-2540.