欢迎访问《硅酸盐通报》官方网站,今天是

硅酸盐通报 ›› 2026, Vol. 45 ›› Issue (1): 81-91.DOI: 10.16552/j.cnki.issn1001-1625.2025.0800

• 水泥混凝土 • 上一篇    下一篇

氯盐环境下GFRP筋-海砂混凝土深受弯构件承载性能研究

金清平1(), 杨振远1, 梁颖强1, 刘运蝶2, 宋仕娥1   

  1. 1.武汉科技大学城市建设学院,武汉 430065
    2.哈尔滨铁道职业技术学院城市轨道交通学院,哈尔滨 150066
  • 收稿日期:2025-08-06 修订日期:2025-10-09 出版日期:2026-01-20 发布日期:2026-02-10
  • 作者简介:金清平(1975—),男,博士,教授。主要从事FRP土木工程结构与性能研究。E-mail:jinqingping@wust.edu.cn

Load-Bearing Capacity of GFRP Bar Sea Sand Concrete Deep Flexural Members in Chloride Environment

JIN Qingping1(), YANG Zhenyuan1, LIANG Yingqiang1, LIU Yundie2, SONG Shie1   

  1. 1. School of Urban Construction,Wuhan University of Science and Technology,Wuhan 430065,China
    2. Urban Rail Transit College,Harbin Railway Vocational and Technical College,Harbin 150066,China
  • Received:2025-08-06 Revised:2025-10-09 Published:2026-01-20 Online:2026-02-10

摘要:

在沿海及海洋工程中,采用海砂代替河砂可减少河砂因跨区域运输而产生的成本及保护陆地生态,配合玻璃纤维增强塑料(GFRP)筋替代钢筋可解决海砂中氯离子腐蚀的问题。针对海洋上桥梁中常见的盖梁等深受弯构件,制作了30个GFRP筋-海砂混凝土深受弯构件并测试其在氯盐环境中浸泡不同时间后的承载性能,包括破坏模式、挠度、裂缝、极限承载力等。结果表明:氯盐浸泡会导致GFRP筋-海砂混凝土深受弯构件破坏模式从混凝土压碎破坏变为剪切破坏;随着浸泡时间的增加,构件开裂荷载增加,极限承载力下降,裂缝数目逐渐减少,最大挠度值增加。根据测试结果,采用GFRP筋折减系数指标修正了现有规范中钢筋混凝土深受弯构件承载力计算公式,修正公式能够较好地预测GFRP筋-海砂混凝土深受弯构件在氯盐环境浸泡后的极限承载力。

关键词: 氯盐环境, 玻璃纤维增强塑料, 海砂混凝土, 深受弯构件, 承载性能, 预测模型

Abstract:

In coastal and marine engineering, using sea sand to replace river sand can reduce the costs associated with cross-regional transportation of river sand and help protect terrestrial ecosystems. Coupled with the use of glass fiber reinforced polymer (GFRP) bars instead of steel reinforcement, it effectively resolves the issue of chloride ion corrosion in sea sand.For the common bent caps and other deep flexural members in offshore bridges, 30 GFRP bar-sea sand concrete deep flexural members were fabricated, and their load-bearing performance was tested after immersion in a chloride environment for different durations, including failure modes, deflection, cracking, and ultimate load capacity. The results show that chloride salt immersion changes the failure mode of GFRP bar-sea sand concrete deep flexural members from concrete crushing to shear failure. As the immersion time increases, the cracking load of the members increases, the ultimate load capacity of the members decrease, the cracks number of the members gradually reduces, and the maximum deflection value of the members increase. Based on the test results, the existing code formula for calculating the load-bearing capacity of reinforced concrete deep flexural members is modified by introducing the GFRP bar reduction factor index. The modified formula can well predict the ultimate load capacity of GFRP bar-sea sand concrete deep flexural members after immersion in a chloride environment.

Key words: chloride environment, GFRP, sea sand concrete, deep flexural member, load-bearing performance, predicted model

中图分类号: