Welcome to Visit BULLETIN OF THE CHINESE CERAMIC SOCIETY! Today is Apr. 9, 2025

BULLETIN OF THE CHINESE CERAMIC SOCIETY ›› 2025, Vol. 44 ›› Issue (3): 1021-1031.

• Solid Waste and Eco-Materials • Previous Articles     Next Articles

Comparative Test on Grinding Properties and Cementitious Properties of Granulated Blast Furnace Slag and Yellow Phosphorus Slag

HUA Tengfei1, HE Zhenhai2,3, SUN Yinguo2,3, LIU Yun3, CHEN Xuefeng2, CHEN Jing4, ZHANG Feng5   

  1. 1. Yunnan Science & Technology Research Institute of Highway, Kunming 650051, China;
    2. China Railway Development & Investment Group Co., Ltd, Kunming 650500, China;
    3. Yunnan Menglv Expressway Investment & Development Co., Ltd, Puer 665000, China;
    4. China Railway No.8 Engineering Group Co., Ltd, Chengdu 610000, China;
    5. The Fifth Engineering Co., Ltd of China Railway First Engineering Group, Baoji 721000, China
  • Received:2024-08-29 Revised:2024-10-21 Online:2025-03-15 Published:2025-04-01

Abstract: In order to verify the feasibility of yellow phosphorus slag produced in Yunnan Province as an supplementary cementitious material, this paper compared the grinding and cementitious properties of granulated blast furnace slag and yellow phosphorus slag, and analyzed and compared their properties as supplementary cementitious materials. The results show that granulated blast furnace slag and yellow phosphorus slag have similar chemical composition and mineral phase. After the same grinding time, the particle size distribution, specific surface area and microstructure of granulated blast furnace slag and yellow phosphorus slag are similar. The increase of specific surface area of granulated blast furnace slag and yellow phosphorus slag promotes the hydration of cement and improves the activity of granulated blast furnace slag and yellow phosphorus slag, and the activity of granulated blast furnace slag is higher than that of yellow phosphorus slag under similar specific surface area. The addition of granulated blast furnace slag and yellow phosphorus slag has a great contribution to the later strength of cement mortar. The later strength of cement mortar increases with the increase of specific surface area of granulated blast furnace slag and yellow phosphorus slag. When the specific surface area of granulated blast furnace slag and yellow phosphorus slag is 340 and 521 m2/kg, respectively, the 28 d compressive strength of cement mortar with 30% (mass fraction) granulated blast furnace slag and yellow phosphorus slag is 46.5 and 47.3 MPa, respectively, which is higher than that of pure cement mortar. When the specific surface area of granulated blast furnace slag and yellow phosphorus slag is 775 and 802 m2/kg, the 28 d compressive strength of cement mortar is 58.7 and 50.9 MPa, respectively. In general, yellow phosphorus slag is an available supplementary cementitious material with high activity in this study, but attention should be paid to the retarding effect of yellow phosphorus slag on cement-based materials.

Key words: granulated blast furnace slag, yellow phosphorus slag, particle size distribution, strength, hydration heat, supplementary cementitious material

CLC Number: