Preparation of High-Performance BaTiO3 Piezoelectric Ceramics by Stereolithography 3D Printing

Abstract

Abstract: Stereolithography 3D printing technology has broad application prospects in the preparation of special-shaped piezoelectric ceramics. In this paper, barium titanate (BaTiO₃) piezoelectric ceramics were prepared by digital light processing technology. The effects of green body morphology and sintering temperature on the microstructure of barium titanate were studied. The results show that the introduction of Triton X-100 makes the viscosity of ceramic slurry less than 3 Pa·s, and the introduction of ceramic powder does not change the properties of resin. The bonding between the layers of ceramic green body is good, and there are no obvious defects. The BaTiO₃ ceramics after sintering contains tetragonal and orthorhombic phases. The remanent polarization is 27.6 μC/cm², the coercive field is 4.6 kV/cm, the relative dielectric constant is 2 512, the dielectric loss is 0.009 1, the Curie temperature is 167 ℃, and the dielectric constant is 182 pC/N.

Key words: barium titanate, piezoelectric ceramics, digital light processing technology, additive manufacturing, ferroelectric property, dielectric property

CLC Number:

TQ174

BI Lunan, LI Ling, SONG Tao, WANG Yingying, LYU Jiaqi, LU Xiang, HAN Zhuoqun, WANG Yang. Preparation of High-Performance BaTiO₃ Piezoelectric Ceramics by Stereolithography 3D Printing[J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(5): 1764-1771.

References

[1] SEBASTIAN T, KOZIELSKI L, ERHART J. Co-sintered PZT ceramics for the piezoelectric transformers[J]. Ceramics International, 2015, 41(8): 9321-9327.
[2] BOWEN C R, KIM H A, WEAVER P M, et al. Piezoelectric and ferroelectric materials and structures for energy harvesting applications[J]. Energy Environ Sci, 2014, 7(1): 25-44.
[3] 刘祥建, 陈仁文. 压电振动能量收集装置研究现状及发展趋势[J]. 振动与冲击, 2012, 31(16): 169-176.
LIU X J, CHEN R W. Current situation and developing trend of piezoelectric vibration energy harvesters[J]. Journal of Vibration and Shock, 2012, 31(16): 169-176 (in Chinese).
[4] GAO J H, XUE D Z, LIU W F, et al. Recent progress on BaTiO₃-based piezoele-ctric ceramics for actuator applications[J]. Actuators, 2017, 6(3): 24.
[5] WEI X X, LIU Y H, ZHAO D J, et al. 3D printing of piezoelectric Barium titanate with high density from milled powders[J]. Journal of the European Ceramic Society, 2020, 40(15): 5423-5430.
[6] 刘文凤, 周超, 高景辉, 等. 无铅压电陶瓷的研究进展[J]. 中国材料进展, 2016, 35(6): 423-428.
LIU W F, ZHOU C, GAO J H, et al. Progress in lead-free piezoelectric ceramics[J]. Materials China, 2016, 35(6): 423-428 (in Chinese).
[7] LAKHDAR Y, TUCK C, BINNER J, et al. Additive manufacturing of advanced ceramic materials[J]. Progress in Materials Science, 2021, 116: 100736.
[8] WANG T T, LU X F, WANG A. A review: 3D printing of microwave absorption ceramics[J]. International Journal of Applied Ceramic Technology, 2020, 17(6): 2477-2491.
[9] CHEN Z W, LI Z Y, LI J J, et al. 3D printing of ceramics: a review[J]. Journal of the European Ceramic Society, 2019, 39(4): 661-687.
[10] 韩卓群, 李伶, 刘时浩, 等. 光固化ZrO₂陶瓷料浆的流变性能研究[J]. 硅酸盐通报, 2021, 40(6): 1965-1971.
HAN Z Q, LI L, LIU S H, et al. Research on rheological properties of stereolithography ZrO₂ ceramic slurry[J]. Bulletin of the Chinese Ceramic Society, 2021, 40(6): 1965-1971 (in Chinese).
[11] 王飞, 李伶, 宋涛, 等. 基于熔融沉积技术的多孔氮化硅陶瓷制备与烧结研究[J].现代技术陶瓷, 2023, 44(增刊1): 461-472.
WANG F, LI L, SONG T, et al. Preparation and sintering of porous silicon nitride ceramics based on melt deposition technology[J]. Advanced Ceramics, 2023, 44(supplement 1): 461-472 (in Chinese).
[12] LI K H, ZHAO Z. The effect of the surfactants on the formulation of UV-curable SLA alumina suspension[J]. Ceramics International, 2017, 43(6): 4761-4767.
[13] LI S, DUAN W Y, ZHAO T, et al. The fabrication of SiBCN ceramic components from preceramic polymers by digital light processing (DLP) 3D printing technology[J]. Journal of the European Ceramic Society, 2018, 38(14): 4597-4603.
[14] CUI X M, OUYANG S X, YU Z Y, et al. A study on green tapes for LOM with water-based tape casting processing[J]. Materials Letters, 2003, 57(7): 1300-1304.
[15] FINA F, GOYANES A, GAISFORD S, et al. Selective laser sintering (SLS) 3D printing of medicines[J]. International Journal of Pharmaceutics, 2017, 529(1/2): 285-293.
[16] GOYANES A, BUANZ A B M, BASIT A W, et al. Fused-filament 3D printing (3DP) for fabrication of tablets[J]. International Journal of Pharmaceutics, 2014, 476(1/2): 88-92.
[17] CHEN W C, WANG F F, YAN K, et al. Micro-stereolithography of KNN-based lead-free piezoceramics[J]. Ceramics International, 2019, 45(4): 4880-4885.
[18] ZENG Y S, JIANG L M, SUN Y Z, et al. 3D-printing piezoelectric composite with honeycomb structure for ultrasonic devices[J]. Micromachines, 2020, 11(8): 713.
[19] CHENG J, CHEN Y, WU J W, et al. 3D printing of BaTiO₃ piezoelectric ceramics for a focused ultrasonic array[J]. Sensors, 2019, 19(19): 4078.
[20] MORENO R. Better ceramics through colloid chemistry[J]. Journal of the European Ceramic Society, 2020, 40(3): 559-587.
[21] ZOU R F, BI L N, HUANG Y, et al. A biocompatible silicon nitride dental implant material prepared by digital light processing technology[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2023, 141: 105756.
[22] WU X Q, XU C J, ZHANG Z M. Preparation and optimization of Si₃N₄ ceramic slurry for low-cost LCD mask stereolithography[J]. Ceramics International, 2021, 47(7): 9400-9408.
[23] QIU P, CHEN J Q, SUN W F, et al. Improved DC dielectric performance of photon-initiated crosslinking polyethylene with TMPTMA auxiliary agent[J]. Materials, 2019, 12(21): 3540.
[24] 王亚宁, 张玉琪, 宋索成, 等. 氧化锆陶瓷扫描光固化成形与脱脂烧结工艺研究[J]. 无机材料学报, 2022, 37(3): 303-309.
WANG Y N, ZHANG Y Q, SONG S C, et al. Laser stereolithography for zirconia ceramic fabrication and its debinding and sintering process[J]. Journal of Inorganic Materials, 2022, 37(3): 303-309 (in Chinese).
[25] 朱俊逸, 张成, 罗忠强, 等. 脱脂工艺对光固化3D打印堇青石陶瓷性能的影响[J]. 无机材料学报, 2022, 37(3): 317-324.
ZHU J Y, ZHANG C, LUO Z Q, et al. Influence of debinding process on the properties of photopolymerization 3D printed cordierite ceramics[J]. Journal of Inorganic Materials, 2022, 37(3): 317-324 (in Chinese).
[26] MA N, ZHANG B P, YANG W G, et al. Phase structure and nano-domain in high performance of BaTiO₃ piezoelectric ceramics[J]. Journal of the European Ceramic Society, 2012, 32(5): 1059-1066.
[27] CHEN Z Y, SONG X, LEI L W, et al. 3D printing of piezoelectric element for energy focusing and ultrasonic sensing[J]. Nano Energy, 2016, 27: 78-86.
[28] SONG X, CHEN Z Y, LEI L W, et al. Piezoelectric component fabrication using projection-based stereolithography of barium titanate ceramic suspensions[J] Rapid Prototyping Journal, 2017, 23(1): 44-53.

Preparation of High-Performance BaTiO₃ Piezoelectric Ceramics by Stereolithography 3D Printing

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	LIU Kai, LU Chao, HE Junchao, LI Tianyang, SHEN Chunhua, YAN Chunze, SHI Yusheng, SUN Huajun. High-Temperature Sintering and Polarization Process of Additive Manufacturing Barium Titanate Piezoelectric Ceramics [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(5): 1772-1783.
[2]	XU Minghao, HUA Kaihui, ZENG Qun, DI Bo, ZHENG Yu, WANG Hongxiang, ZHANG Guoxiang. Research Progress of Barium Titanate and Potassium Sodium Niobate Lead-Free Piezoelectric Ceramics [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(2): 649-658.
[3]	CUI Tangyin, WANG Peng, LIU Ruixiang, WANG Hongsheng, CAO Junchang, CHEN Dongjie. Analysis of Influencing Factors on Dielectric Properties of Fused Quartz Ceramics [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(2): 666-672.
[4]	LI Wei, GAI Xuezhou, WANG Yuequn. Large Strain Piezoelectric Ceramics for Engineering Applications Prepared by Solid-State Synthesis Method [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2023, 42(7): 2597-2602.
[5]	ZHOU Yuanheng, CHEN Caijun, GE Junxian, WANG Jiaxin, WEI Ruiyong, XING Zhanwen. Research Progress of Zirconia All-Ceramic Crowns via Stereolithography 3D Printing [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2023, 42(6): 2150-2160.
[6]	WANG Xing, ZOU Helin. Influences of In-Situ Annealing and Deposition Temperature of Bottom Electrodes on Properties of PZT Films [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2023, 42(2): 743-750.
[7]	ZHAN Lingli, JIA Han, ZHANG Xiaofeng, LI Hong, XIE Jun, XIONG Dehua. Preparation and Properties of MgO-Al₂O₃-SiO₂ Glass-Ceramics with Different Al₂O₃/SiO₂ Ratios [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2023, 42(12): 4490-4500.
[8]	LIN Congyi, TAO Honglei, LI Wei. Low Temperature Sintering and Microwave Dielectric Properties of MnO₂-CuO-TiO₂ Co-Doped Al₂O₃ Ceramics [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2023, 42(10): 3764-3768.
[9]	YING Xiaoyun, LIU Jun, QIAO Wenhao, ZHOU Ming, LUO Ying. Cold Sintering Preparation and Dielectric Properties of 0-3 Type Barium Strontium Titanate/Polytetrafluoroethylene Composites [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2022, 41(7): 2574-2583.
[10]	LI Wei, ZHOU Changrong, LI Qingning, LI Rui, HOU Linghao, MENG Tianxiao. Effect of Raw Material Pretreatment of Fe₂O₃ on Insulating and Electrical Properties of 0.7BiFeO₃-0.3BaTiO₃ Ceramics [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2022, 41(6): 2126-2133.
[11]	WANG Yuequn, XIANG Guanglei, GAO Liang. Study on Sm-Doped Pb(Mg_1/3Nb_2/3)O₃-PZT Piezoelectric Ceramics [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2022, 41(4): 1433-1439.
[12]	WANG Ruanbin, CHENG Liqian, LU Jingtong, JIN Ruoqi, HE Mingzhe, YAN Shuhao, JIANG Damei, DENG Shijie, CHU Xiangcheng. Preparation and Properties of Carbon Fiber Reinforced BT-HA Composites [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2022, 41(3): 994-1001.
[13]	ZHOU Zhi, WANG Yiying, ZHOU Huajiang, LEI Liqin, WANG Jinxiu, CHEN Yu. Doping Effects of Oxides on 0.06BiYbO₃-0.94Pb(Zr_0.48Ti_0.52)O₃ Ternary Piezoceramics [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2022, 41(3): 1020-1030.
[14]	HOU Qingjian, YOU Tao, WANG Ziming, XIE Lianzhong. Effect of Sintering Heating Rate on Properties of Low Temperature Co-Fired Ceramic Substrate [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2022, 41(3): 1039-1043.
[15]	DAI Shuyun, ZHONG Shiqi, ZHANG Huan, ZHU Peishu, LI Tian, LIU Jie, ZHENG Xinghua. Preparation, Structure and Properties of X8R BaTiO₃ Based Fine-Grained Ceramics [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2022, 41(12): 4412-4418.