Experimental Study on Basic Mechanical Properties of  Polypropylene Fiber-Reinforced Ceramsite Concrete

Abstract

Abstract: In order to improve the strength and brittleness of ceramsite concrete, polypropylene fiber was added to ceramsite concrete in this study. A total of 180 polypropylene fiber-reinforced ceramsite concrete specimens were prepared, and cube compressive test, splitting tensile test, axial compressive test and elastic modulus test were carried out. The results show that polypropylene fiber can effectively improve the splitting tensile strength and tension-compression ratio of ceramsite concrete, and has little effect on compressive strength and elastic modulus. Based on the experimental results, the conversion relationship model between splitting tensile strength and cube compressive strength, axial compressive strength and cube compressive strength, and the numerical model of elastic modulus of polypropylene fiber-reinforced ceramsite concrete were proposed.

Key words: ceramsite concrete, polypropylene fiber, fiber reinforcement, mechanical property, numerical modeling, size effect

CLC Number:

GU Fei, LI Congqi, YANG Ying, LI Huilong, JIN Ziran, WANG Xin, LIU Hushan. Experimental Study on Basic Mechanical Properties of Polypropylene Fiber-Reinforced Ceramsite Concrete[J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(10): 3572-3584.

References

[1] CUI H Z, LO T Y, ALI MEMON S, et al. Analytical model for compressive strength, elastic modulus and peak strain of structural lightweight aggregate concrete[J]. Construction and Building Materials, 2012, 36: 1036-1043.
[2] BARBOSA F S, FARAGE M C R, BEAUCOUR A L, et al. Evaluation of aggregate gradation in lightweight concrete via image processing[J]. Construction and Building Materials, 2012, 29: 7-11.
[3] 中华人民共和国住房和城乡建设部. 轻骨料混凝土应用技术标准: JGJ/T 12—2019[S]. 北京: 中国建筑工业出版社, 2019.
Ministry of Housing and Urban-Rural Development of the People's Republic of China. Technical standard for application of lightweight aggregate concrete: JGJ/T 12—2019[S]. Beijing: China Construction Industry Press, 2019 (in Chinese).
[4] ACI Committee 318. Building code requirements for structural concrete and commentary: ACI-318[S]. Detroit: American Concrete Institute, 2014.
[5] YE Y X, LIU J L, ZHANG Z Y, et al. Experimental study of high-strength steel fiber lightweight aggregate concrete on mechanical properties and toughness index[J]. Advances in Materials Science and Engineering, 2020, 2020: 5915034.
[6] BADOGIANNIS E, CHRISTIDIS K, TZANETATOS G. Evaluation of the mechanical behavior of pumice lightweight concrete reinforced with steel and polypropylene fibers[J]. Construction and Building Materials, 2019, 196: 443-456.
[7] ZHAO M L, ZHAO M S, CHEN M H, et al. An experimental study on strength and toughness of steel fiber reinforced expanded-shale lightweight concrete[J]. Construction and Building Materials, 2018, 183: 493-501.
[8] GULER S. The effect of polyamide fibers on the strength and toughness properties of structural lightweight aggregate concrete[J]. Construction and Building Materials, 2018, 173: 394-402.
[9] KARAMLOO M, AFZALI-NANIZ O, DOOSTMOHAMADI A. Impact of using different amounts of polyolefin macro fibers on fracture behavior, size effect, and mechanical properties of self-compacting lightweight concrete[J]. Construction and Building Materials, 2020, 250: 118856.
[10] AMIN M, TAYEH B A, AGWA I S. Investigating the mechanical and microstructure properties of fibre-reinforced lightweight concrete under elevated temperatures[J]. Case Studies in Construction Materials, 2020, 13: e00459.
[11] HOSSEINI M A, ESFAHANI M R. Experimental study on size effect and fracture properties of polypropylene fiber reinforced lightweight aggregate concrete[J]. Periodica Polytechnica Civil Engineering, 2022: 1278-1293.
[12] ANWAR HOSSAIN K M. Properties of volcanic pumice based cement and lightweight concrete[J]. Cement and Concrete Research, 2004, 34(2): 283-291.
[13] 中华人民共和国住房和城乡建设部, 国家市场监督管理总局. 混凝土物理力学性能试验方法标准: GB/T 50081—2019[S]. 北京: 中国建筑工业出版社, 2019.
Ministry of Housing and Urban-Rural Development of the People's Republic of China, State Administration of Market Supervision and Administration. Standard for test methods of physical and mechanical properties of concrete: GB/T 50081—2019[S]. Beijing: China Construction Industry Press, 2019 (in Chinese).
[14] 龚洛书, 柳春圃. 轻集料混凝土[M]. 北京: 中国铁道出版社, 1996.
GONG L S, LIU C P. Lightweight aggregate concrete[M]. Beijing: China Railway Publishing House, 1996 (in Chinese).
[15] 胡曙光, 王发洲. 轻集料混凝土[M]. 北京: 化学工业出版社, 2006.
HU S G, WANG F Z. Lightweight aggregate concrete[M]. Beijing: Chemical Industry Press, 2006 (in Chinese).
[16] 过镇海. 混凝土的强度和本构关系: 原理与应用[M]. 北京: 中国建筑工业出版社, 2004.
GUO Z H. Strength and structural relationships of concrete: principles and applications[M]. Beijing: China Construction Industry Press, 2004 (in Chinese).
[17] CARRASQUILLO R, NILSON A H, SLATE F. Properties of high-strength concrete subject to short-term loads[J]. Journal Proceedings, 1981, 78(3): 171-178.
[18] 中国建筑科学研究院建筑结构研究所. 轻骨料混凝土的研究和应用文集[M]. 北京: 中国建筑工业出版社, 1981.
Institute of Building Structures of China Academy of Building Research. Anthology of research and application of lightweight aggregate concrete[M]. Beijing: China Construction Industry Press, 1981 (in Chinese).
[19] ZHANG M H, GJVORV O E. Mechanical properties of high-strength lightweight concrete[J]. ACI Materials Journal, 1991, 88(3): 240-247.
[20] 中华人民共和国住房和城乡建设部. 混凝土结构设计标准: GB/T 50010—2010[S]. 北京: 中国建筑工业出版社, 2011.
Ministry of Housing and Urban-Rural Development of the People's Republic of China. Criteria for design of concrete structures: GB/T 50010—2010[S]. Beijing: China Building Industry Press, 2011 (in Chinese).
[21] ROMUALDI J P, BATSON G B. Mechanics of crack arrest in concrete[J]. Journal of the Engineering Mechanics Division, 1963, 89(3): 147-168.
[22] INDELICATO F, PAGGI M. Specimen shape and the problem of contact in the assessment of concrete compressive strength[J]. Materials and Structures, 2008, 41(2): 431-441.
[23] 牛建刚, 刘洪振, 左付亮, 等. 塑钢纤维轻骨料混凝土抗压强度换算关系试验研究[J]. 硅酸盐通报, 2017, 36(3): 996-1002.
NIU J G, LIU H Z, ZUO F L, et al. Experimental study on the compressive strength index conversion relationship of plastic steel fibers reinforced lightweight aggregate concrete[J]. Bulletin of the Chinese Ceramic Society, 2017, 36(3): 996-1002 (in Chinese).
[24] 梁炯丰, 程丽红, 王长诚, 等. 废砖再生粗骨料混凝土强度指标换算关系试验研究[J]. 科学技术与工程, 2013, 13(27): 8211-8213.
LIANG J F, CHENG L H, WANG C C, et al. Experimental study on relationships between strength indexes of waste brick recycled coarse aggregate concrete[J]. Science Technology and Engineering, 2013, 13(27): 8211-8213 (in Chinese).
[25] LIM J C, OZBAKKALOGLU T. Stress-strain model for normal- and light-weight concretes under uniaxial and triaxial compression[J]. Construction and Building Materials, 2014, 71: 492-509.
[26] YANG K H, MUN J H, CHO M S, et al. Stress-strain model for various unconfined concretes in compression[J]. ACI Materials Journal, 2014, 111(4): 819.
[27] 李平江, 刘巽伯. 高强页岩陶粒混凝土的基本力学性能[J]. 建筑材料学报, 2004, 7(1): 113-116.
LI P J, LIU X B. Fundamental mechanical properties of concretewith high strength expanded shale[J]. Journal of Building Materials, 2004, 7(1): 113-116 (in Chinese).
[28] CARREIRA D J, CHU K H. Stress-strain relationship for plain concrete in compression[J]. ACI Journal Proceedings, 1985, 82(6): 797-804.

Experimental Study on Basic Mechanical Properties of Polypropylene Fiber-Reinforced Ceramsite Concrete

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	ZHAO Guoqing, YANG Jinbo, YIN Hang. Molecular Dynamics of NaCl Evaporation Crystallization in C-S-H Gel Amorphous Nanopores [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(9): 3173-3181.
[2]	ZHAO Yanru, LONG Sirui, BAI Jianwen, LIU Ming. Experimental Study on Mechanical Properties and Microstructure of Aeolian Sand Concrete after High Temperature [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(9): 3182-3191.
[3]	ZHANG Zhenyang, ZHANG Lu, YI Haihe, ZHENG Run, MA Keshun, ZHANG Lin, REN Mengqi, WANG Chunguang. Mechanical Properties of Geopolymer Concrete Based on Response Surface Method [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(9): 3192-3202.
[4]	WANG Xiaoxiao, DONG Peisen, YANG Xinrui, ZHANG Ju, YAN Changwang, DONG Yufei. Mechanical Properties of Steel Fiber Geopolymer Concrete under Low Temperature [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(9): 3203-3213.
[5]	HUANG Bin, GONG Mingzi, PAN Axin, RAO Xianpeng, WANG Tao, CHEN Chen, HUANG Wei. Influences of Water Reducing Agent and Steel Fiber on Rheological and Mechanical Properties of Ultra-High Performance Concrete [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(9): 3214-3223.
[6]	WANG Hao, TAN Yanbin, LIU Xing, YANG Lu, YUAN Qiang, XIE Binfu, LIU Bo. Influences of Igneous Rock Mineral Materials on Properties of Concrete [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(9): 3244-3251.
[7]	LI Yanyan, DU Xiaoli, WANG Haowei, XU Kai. Dynamic and Static Mechanical Properties of Silica Fume-Polypropylene Fiber Double Doped Concrete [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(9): 3320-3329.
[8]	CUI Yingying, HE Jianhui, LYU Minwang, YANG Lu, LIU Yunpeng. Performance of Belite Cement Clinker from Completely Recyclable Cement Mortars [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(9): 3348-3358.
[9]	LIU Hongbo, JIA Xiaojing, ZHANG Boyang, SUN Yan, LI Yong, CHANG Pu, SUN Jing. Mechanical Properties and Frost Resistance Durability of Recycled Coarse Aggregate Concrete Dual Doping Graphene and Oxide-Graphene [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(9): 3359-3367.
[10]	CHEN Hao, YANG Jingxiao, XU Yong, JING Zhengyang, TU Bingtian, WANG Hao. Preparation and Properties of Mg_0.27Al_2.58O_3.73N_0.27 Transparent Ceramics by Hot Pressing and Hot Isostatic Pressing Sintering [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(9): 3378-3385.
[11]	ZHAO Cunhe, NIE Guanglin, LIU Yijun, ZUO Fei, PANG Weike, WANG Qinggang,BAO Yiwang. Ceramic Slabs Prepared Using Different Flux System and Its Properties [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(9): 3386-3398.
[12]	HAN Zheng, WANG Tao, LIU Zhiwei, NIE Yunpeng, WANG Xueting. Composite Slurry for Room-Temperature Extrusion 3D Printing HA/β-TCP/DCPA Bone Scaffold [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(9): 3472-3478.
[13]	CHEN Feng, YI Ke, WANG Chaohui, DANG Wujuan, QU Xifeng. Research Progress of Fiber Modified Cement-Based Materials: Cement Stabilized Base [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(9): 3479-3493.
[14]	ZHOU Yongfang, ZHANG Dajiang, JIANG Liangzhi, HUANG Wen, WANG Lei, WANG Jianfeng. Research Progress on Effect of Tertiary Alkanolamine on Hydration of Cementitious Materials [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(8): 2748-2757.
[15]	LIU Tongjun, ZHANG Chong, XU Dujun, ZHANG Jicai, LI Fang, ZHANG Xiuzhi. Performance of High Performance Concrete Based on Magnetic Field Oriented Steel Fiber [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(8): 2848-2857.