Welcome to Visit BULLETIN OF THE CHINESE CERAMIC SOCIETY! Today is

BULLETIN OF THE CHINESE CERAMIC SOCIETY ›› 2023, Vol. 42 ›› Issue (1): 180-187.

Special Issue: 资源综合利用

• Solid Waste and Eco-Materials • Previous Articles     Next Articles

Preparation and Properties of Iron Tailings Powder-Desulfurization Ash Cementitious Material

CHEN Xing, YU Feng, CAO Yue, FANG Yuan   

  1. College of Civil Engineering and Architecture, Anhui University of Technology, Ma’anshan 243002, China
  • Received:2022-09-11 Revised:2022-10-01 Online:2023-01-15 Published:2023-02-15

Abstract: In order to improve the comprehensive utilization of industrial solid waste such as iron tailings and desulfurization ash, sodium hydroxide and calcium sulfate were used as composite excitant, and iron tailings powder, desulfurization ash and slag powder were used as raw materials to prepare iron tailings powder-desulfurization ash cementitious material. The orthogonal test was carried out to analyze the effects of iron tailings powder content, desulfurization ash content, sodium hydroxide content and calcium sulfate content on the compressive strength of the cementitious material and the mix proportion was optimized. The microstructure was characterized by X-ray diffractometer (XRD) and scanning electron microscope (SEM). The results show that the content of sodium hydroxide, iron tailings powder and calcium sulfate has the most significant effects on the 3 d, 7 d, and 28 d compressive strength of the cementitious material, respectively. The optimal content of iron tailings powder, desulfurization ash, sodium hydroxide and calcium sulfate are 20%, 10%, 1% and 9% (mass fraction), respectively. Meanwhile, the 3 d compressive strength of cementitious material is 4.59 MPa, and the 28 d compressive strength is 18.44 MPa, with a dense microstructure and the highest macroscopic strength.

Key words: cementitious material, iron tailings powder, desulfurization ash, orthogonal test, compressive strength, micro analysis

CLC Number: