Research Progress on Glass Resistance to Uniform Load

Abstract

Abstract: As a typical type of brittle material, glass has draw much attention on its mechanical properties when it is used in areas of building curtain wall, windshield and side window of airplane/high-speed rail/bus, pressure window, ram engine cover, etc. At present, the research on glass resistance to uniform load mainly involves: (1) Exploring the methods to characterize the glass resistance to uniform load, such as deflection, strain rate, tensile stress and static pressure strength, etc. However, unified evaluation method has not been established yet. (2) Using calculation software, such as Ansys, to simulate glass resistance to uniform load, which can not only provide performance evaluation basis for glass component design, but also avoid destructive test. Based on the two research hotspots above, the research progress on glass resistance to uniform load was summarized, and its development trend was prospected.

Key words: glass, uniform load, wind pressure, hydrostatic pressure, simulation

CLC Number:

TQ171

YANG Penghui, WANG Yanhang, LI Xianzi, HAN Tao, LI Jiaman, ZHU Zhiguo, ZU Chengkui. Research Progress on Glass Resistance to Uniform Load[J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2022, 41(11): 4036-4048.

References

[1] 陈佳.钢化玻璃安全性能的理论分析与实验研究[D].杭州:浙江大学,2014.
CHEN J. Theoretical analysis and experimental study on the safety performance of tempered glass[D]. Hangzhou: Zhejiang University, 2014 (in Chinese).
[2] 李磊,安二峰,杨军.浮法玻璃应变率相关的动态本构关系[J].建筑材料学报,2011,14(2):202-206.
LI L, AN E F, YANG J. Strain rate dependent dynamic constitutive equation of float glass[J]. Journal of Building Materials, 2011, 14(2): 202-206 (in Chinese).
[3] LEMAITRE J, PLUMTREE A. Application of damage concepts to predict creep-fatigue failures[J]. Journal of Engineering Materials and Technology, 1979, 101(3): 284-292.
[4] PERONI M, SOLOMOS G, PIZZINATO V, et al. Experimental investigation of high strain-rate behaviour of glass[J]. Applied Mechanics and Materials, 2011, 82: 63-68.
[5] ZHANG X H, ZOU Y, HAO H, et al. Laboratory test on dynamic material properties of annealed float glass[J]. International Journal of Protective Structures, 2012, 3(4): 407-430.
[6] TEAGUE JR J M, BLAU H H. Investigations of stresses in glass bottles under internal hydrostatic pressure[J]. Journal of the American Ceramic Society, 1956, 39(7): 229-252.
[7] 史宏斌,刘勇琼,钟伟芳.均布压力作用各向异性矩形薄板大挠度问题[J].强度与环境,1997,24(3):19-25.
SHI H B, LIU Y Q, ZHONG W F. A perturbation-variational solution to large deflection problems of orthotropic rectangular thin plates under uniformly distributed load[J]. Structure ＆ Environment Engineering, 1997, 24(3): 19-25 (in Chinese).
[8] SCANNELL P, MILICH N, KALIL E. Advanced integral rocket ramjet port cover development[C]//16th Joint Propulsion Conference. Hartford, CT. Reston, Virginia: AIAA, 1980: 1279.
[9] ĆWIKLAK J, KOBIAŁKA E, GOŚ A. Experimental and numerical investigations of bird models for bird strike analysis[J]. Energies, 2022, 15(10): 3699.
[10] OSNES K, HOLMEN J K, GRUE T, et al. Perforation of laminated glass: an experimental and numerical study[J]. International Journal of Impact Engineering, 2021, 156: 103922.
[11] SHI C L, ZHANG J G, ZHANG J B, et al. Experimental study and finite element analysis on impact resistance of large-rupture-strain FRP reinforced civil air defense wall[J]. Structures, 2022, 41: 511-524.
[12] 张士翔,李炯,何瑄,等.风荷载作用下中空玻璃面法线挠度变化规律浅析[J].建筑科学,2014,30(3):18-21.
ZHANG S X, LI J, HE X, et al. Analysis of frontal deflection variation of insulating glass under wind load[J]. Building Science, 2014, 30(3): 18-21 (in Chinese).
[13] 潘云艳,许良中,汪波.列车车窗玻璃承受静载能力仿真分析与试验测试[J].电力机车与城轨车辆,2017,40(3):67-71.
PAN Y Y, XU L Z, WANG B. Simulation analysis and experimental test of train window glasŚ capacity to static pressure load[J]. Electric Locomotives ＆ Mass Transit Vehicles, 2017, 40(3): 67-71 (in Chinese).
[14] 王立闯,臧曙光,马眷荣,等.高速列车侧窗风压疲劳性能研究[J].武汉理工大学学报,2010,32(22):5-8.
WANG L C, ZANG S G, MA J R, et al. Fatigue loading capacities of side windows on high speed trains[J]. Journal of Wuhan University of Technology, 2010, 32(22): 5-8 (in Chinese).
[15] GUO Z, WANG J P, CHEN Y. Research on mechanical behavior of three-layer toughened sandwich glass with trilateral simple support[J]. Composite Structures, 2020, 252: 112738.
[16] RAVIMONY R, JOSEPH A, MANGAL L. Investigations on the flexural performance of laminated glass[J]. IOP Conference Series: Earth and Environmental Science, 2020, 491(1): 012023.
[17] 李磊,安二峰,杨军.钢化玻璃应变率相关的动态本构关系[J].功能材料,2010:262-267.
LI L, AN E F, YANG J. Strain-rate dependent dynamic constitutive model of tempered glass[J]. Functional Materials, 2010: 262-267 (in Chinese).
[18] 郭伟国,李玉龙,索涛.应力波基础简明教程[M].西安:西北工业大学出版社,2007:128-132.
GUO W G, LI Y L, SUO T. A concise course of stress wave foundation[M]. Xi'an: Northwestern Polytechnical University Press, 2007: 128-132 (in Chinese).
[19] 王振,张超,王银茂,等.飞机风挡无机玻璃在不同应变率下的力学行为[J].爆炸与冲击,2018,38(2):295-301.
WANG Z, ZHANG C, WANG Y M, et al. Mechanical behaviours of aeronautical inorganic glass at different strain rates[J]. Explosion and Shock Waves, 2018, 38(2): 295-301 (in Chinese).
[20] 牛欢欢,闫晓鹏,罗浩舜,等.不同应变率下蓝宝石透明陶瓷玻璃的力学响应[J].爆炸与冲击,2022,42(7):74-83.
NIU H H, YAN X P, LUO H S, et al. Mechanical response of sapphire transparent ceramic glass at different strain rates[J]. Explosion and Shock Waves, 2022, 42(7): 74-83 (in Chinese).
[21] 张晓晴,姚小虎,宁建国,等.Al₂O₃陶瓷材料应变率相关的动态本构关系研究[J].爆炸与冲击,2004,24(3):226-232.
ZHANG X Q, YAO X H, NING J G, et al. A study on the strain-rate dependent dynamic constitutive equation of Al₂O₃ ceramics[J]. Explosion and Shock Waves, 2004, 24(3): 226-232 (in Chinese).
[22] CHEN W N, RAVICHANDRAN G. Dynamic compressive failure of a glass ceramic under lateral confinement[J]. Journal of the Mechanics and Physics of Solids, 1997, 45(8): 1303-1328.
[23] CHEN W, RAVICHANDRAN G. Failure mode transition in ceramics under dynamic multiaxial compression[J]. International Journal of Fracture, 2000, 101(1/2):141-159.
[24] 刘鸿文.材料力学[M].北京:高等教育出版社,2004.
LIU H W. Mechanics of materials[M]. Beijing: Higher Education Press, 2004 (in Chinese).
[25] HOLMQUIST T J, WERESZCZAK A A. The internal tensile strength of a borosilicate glass determined from laser shock experiments and computational analysis[J]. International Journal of Applied Glass Science, 2014, 5(4): 345-352.
[26] 马涛,张克来,冯甜甜,等.基于Solid Works Simulation的万米潜水表耐压表玻璃设计[J].装备制造技术,2018(7):9-13+26.
MA T, ZHANG K L, FENG T T, et al. Design of sapphire watch-glasses of 10 000 m waterproof watch based on solid works simulation[J]. Equipment Manufacturing Technology, 2018(7): 9-13+26 (in Chinese).
[27] 张文东,董登科,陈莉.基于ABAQUS的裂纹扩展模拟[J].结构强度研究,2015(3):14-17+32.
ZHANG W D, DONG D K, CHEN L. Simulation of crack propagation based on ABAQUS[J]. Research on Structural Strength, 2015(3): 14-17+32 (in Chinese).
[28] 刘长虹,李洪升,彭军.基于XFEM的裂纹扩展分析[J].上海工程技术大学学报,2010,24(3):218-220.
LIU C H, LI H S, PENG J. Analysis of crack growth based on XFEM[J]. Journal of Shanghai University of Engineering Science, 2010, 24(3): 218-220 (in Chinese).
[29] LIU Y, WANG J W, LIU L, et al. Study of the failure mechanism of an epoxy coating system under high hydrostatic pressure[J]. Corrosion Science, 2013, 74: 59-70.
[30] BROUGHTON W R, LODEIRO M J, PILKINGTON G D. Influence of coupling agents on material behaviour of glass flake reinforced polypropylene[J]. Composites Part A: Applied Science and Manufacturing, 2010, 41(4): 506-514.
[31] 李东.无机玻璃板的冲击破坏研究[D].广州:华南理工大学,2020.
LI D. Investigation of the breakage of soda-lime glass plates under impact loads[D]. Guangzhou: South China University of Technology, 2020 (in Chinese).
[32] 王立闯.高速列车侧窗循环载荷实验研究[D].北京:中国建筑材料科学研究总院,2011.
WANG L C. Research on cycle load experiment of high-speed train side windows[D]. Beijing: China Academy of Building Materials Science, 2011 (in Chinese).
[33] 冯浩.进气道堵盖设计与仿真研究[D].重庆:重庆大学,2018.
FENG H. Design and numerical simulation of port cover for air intake port[D]. Chongqing: Chongqing University, 2018 (in Chinese).
[34] 郑凯斌,董新刚,喻琳峰,等.进气道出口堵盖打开爆炸冲击条件下固冲发动机动态响应分析[J].固体火箭技术,2021,44(2):247-253.
ZHENG K B, DONG X G, YU L F, et al. Pyroshock response simulation analysis at the moment of the inlet exit cover opening in solid rocket ramjet[J]. Journal of Solid Rocket Technology, 2021, 44(2): 247-253 (in Chinese).
[35] ZHANG X D, ZHOU W, XU M C. Experimental study on single corner cold bending mechanical response of laminated of PVB interlayer tempered glass panes and the coupling effect with load[J]. Materials (Basel, Switzerland), 2021, 14(22): 6914.
[36] HEISKARI J, ROMANOFF J, LAAKSO A, et al. On the thickness determination of rectangular glass panes in insulating glass units considering the load sharing and geometrically nonlinear bending[J]. Thin-Walled Structures, 2022, 171: 108774.
[37] ZHANG X D, LIANG J Z, HUANG D. Study on the mechanical response of anticlastic cold bending insulating glass and its coupling effect with uniform load[J]. PLoS One, 2021, 16(4): e0250463.
[38] COCHER A, MASSON C, FOUREST B, et al. “Rustique” ducted rocket: development and recent improvements[J]. Göteborg Studies in Politics, 2005.
[39] FRUGE K J. Design and testing of a caseless solid-fuel integral-rocket ramjet engine for use in small tactical missiles[D]. USA: Naval Postgraduate School, 1991.
[40] WANG C H, LIU Y, LIU Y B. Design and experimental studies on ceramic port cover for dual pulse motor[J]. Acta Astronautica, 2011, 68(11/12): 1881-1890.
[41] 张国宏,黄少波,崔金平,等.固体火箭冲压发动机转级技术[J].弹箭与制导学报,2012,32(3):129-132.
ZHANG G H, HUANG S B, CUI J P, et al. Transition technology in integrated rocket ramjet engine[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2012, 32(3): 129-132 (in Chinese).
[42] ANUSAVICE K J, SHEN C, VERMOST B, et al. Strengthening of porcelain by ion exchange subsequent to thermal tempering[J]. Dental Materials, 1992, 8(3): 149-152.
[43] ARUN K V, IAN M S. High-strength, large-case depth chemically strengthened lithium aluminosilicate glass[J]. Journal of the American Ceramic Society, 2010, 18(2): 27.
[44] SVENSON M N, THIRION L M, YOUNGMAN R E, et al. Effects of thermal and pressure histories on the chemical strengthening of sodium aluminosilicate glass[J]. Frontiers in Materials, 2016, 3: 14.
[45] CALIZO I, BAO W, MIAO F, et al. Graphene-on-sapphire and graphene-on-glass: Raman spectroscopy study[J]. Applied Physics Letters, 2007, 91: 201904.
[46] GUO W, FU L, LIN T S, et al. New design of sapphire joints brazed with bismuth-borate glass[J]. Ceramics International, 2019, 45(4): 5036-5049.
[47] SIBEKO M A, LUYT A S, SALADINO M L. Thermomechanical properties and thermal degradation kinetics of poly(methyl methacrylate) (PMMA) and polycarbonate (PC) filled with cerium-doped yttrium aluminium garnet (Ce ∶YAG) prepared by melt compounding[J]. Polymer Bulletin, 2017, 74(7): 2841-2859.
[48] ANTOINE G O, BATRA R C. Low speed impact of laminated polymethylmethacrylate/adhesive/polycarbonate plates[J]. Composite Structures, 2014, 116: 193-210.