Welcome to Visit BULLETIN OF THE CHINESE CERAMIC SOCIETY! Today is

BULLETIN OF THE CHINESE CERAMIC SOCIETY ›› 2021, Vol. 40 ›› Issue (1): 266-270.

Special Issue: 玻璃

• Glass • Previous Articles     Next Articles

Effect of SnO on Structure and Performance ofSnF2-P2O5-WO3 Glass System

DIAO Jinlong1,2, YU Tianlai3, MO Dahong3, ZHENG Tao1,2, GUO Yanyan1, LYU Jingwen1   

  1. 1. Engineering Research Center of Optoelectronic Functional Materials,Ministry of Education,Changchun University of Science andTechnology,Changchun 130022,China;
    2. Jilin Provincial Science and Technology Innovation Center of Optical Materials andChemistry,Changchun University of Science and Technology,Changchun 130022,China;
    3. Chengdu Guangming GlassCompany Limited,Chengdu 610100,China
  • Received:2020-08-09 Revised:2020-10-20 Online:2021-01-15 Published:2021-02-07

Abstract: Sealing glass is widely used in vacuum microelectronics,aerospace,automobile and other industrial fields due to its good heat resistance,high chemical stability and mechanical strength.Phosphate glass has the characteristics of low cost,low characteristic temperature and low stability,which is often used to prepare sealing glass.The glass with composition of (60-x)SnF2-xSnO-35P2O5-5WO3 (x=0%,5%,10%,15%,20%,mass fraction) was prepared by high temperature melting method.The effect of SnO content on the structure and performance of the glass was studied.The internal structure of the glass was characterized by IR,and the thermal expansion coefficient and characteristic temperatures of the glass were measured.The results show that the addition of SnO to the composition introduces non-bridging oxygen to change the O/P atomic ratio,thereby affecting the glass structure and performance.With the increase of SnO content,the characteristic temperature,sealing temperature and water resistance of the glass are improved,and the coefficient of thermal expansion decreases.

Key words: low temperature sealing glass, phosphate, structure, characteristic temperature, coefficient of thermal expansion, water resistance

CLC Number: