Welcome to Visit BULLETIN OF THE CHINESE CERAMIC SOCIETY! Today is

BULLETIN OF THE CHINESE CERAMIC SOCIETY ›› 2025, Vol. 44 ›› Issue (5): 1788-1802.DOI: 10.16552/j.cnki.issn1001-1625.2024.1209

• Solid Waste and Eco-Materials • Previous Articles     Next Articles

Influences of Acid Activators on Properties of Solid Waste Materials and Grouting Materials

ZHANG Huifang1,2, CHEN Jie1, WANG Lei1, LI Xiaochen3, LI Jinzhu4, LIU Kaihong4, CAO Hui4, REN Zejiang5, LIU Zheying6   

  1. 1. School of Civil Engineering, Hebei Institute of Architecture Civil Engineering, Zhangjiakou 075000, China;
    2. Prefabricated Building and Underground Engineering Technology Innovation Center of Hebei Province, Zhangjiakou 075000, China;
    3. Zhangjiakou Yiyuan Construction Waste Disposal and Comprehensive Utilization Co., Ltd., Zhangjiakou 075000, China;
    4. Zhangjiakou Housing and Urban Rural Development Bureau, Zhangjiakou 075000, China;
    5. Zhangjiakou Construction Investment New Energy Co., Ltd., Zhangjiakou 075000, China;
    6. Zhangjiakou City Qiaoxi District Municipal Engineering and Local Road Service Center, Zhangjiakou 075000, China
  • Received:2024-10-14 Revised:2024-12-27 Published:2025-05-20

Abstract: In order to improve the utilization rate of solid waste, hydrochloric acid, acetic acid and oxalic acid were respectively selected as acid activators to impregnate and excite fly ash and slag micro-powder, subsequently prepareing grouting materials. The optimal excitation concentration of acid activator was determined by measuring the mechanical properties of grouting materials. The specimens were placed in standard curing environment, 3% (mass fraction) NaCl solution, 3% (mass fraction) Na2SO4 solution, 3% (mass fraction) NaCl and Na2SO4 mixed solution for curing for 28 d, respectively. The corrosion resistance coefficient was calculated by measuring the flexural strength of the specimen, and the corrosion resistance of the grouting material prepared after acid excited solid waste in different corrosion environments was analyzed comprehensively combined with the microstructure of the specimen. The results show that after the grouting material specimens prepared by soaking and exciting fly ash and slag in a 2.0% (mass fraction) hydrochloric acid solution, the compressive strength is the highest, which can reach 64.5 MPa. The contents of quartz and ettringite in the grouting material prepared after acid excitation of fly ash and slag increase, and acid excitation can promote the hydration reaction to a certain extent. The grouting material specimens prepared by hydrochloric acid excitation have the poorest resistance to the erosion of Cl- and can resist the erosion of SO2-4 to a certain extent.

Key words: acid excitation, solid waste material, grounting naterial, mechanical property, micro-mechanism, durability

CLC Number: