硫系玻璃单点金刚石车削技术的研究进展

摘要/Abstract

摘要： 硫系玻璃是应用较为广泛且较难加工的红外光学元件。单点金刚石车削加工技术不仅具有较高的加工质量,还能有效避免磨料嵌入光学元件导致面形精度降低,适用于小口径、大批量硫系玻璃镜片的超精密加工。本文介绍了硫系玻璃单点金刚石车削加工的原理和条件,综述了硫系玻璃单点金刚石车削加工过程中机床、刀具、加工工艺等对面形精度和表面光洁度的影响。

关键词: 硫系玻璃, 单点金刚石车削加工, 面形精度, 表面光洁度, 生产效率

Abstract: Chalcogenide glass is an infrared optical element which is widely used and difficult to process. Single point diamond turning technology not only has high processing quality, but also can effectively avoid the reduction of surface shape accuracy caused by abrasive embedded in optical elements. It is suitable for ultra-precision machining of small-caliber and large-volume chalcogenide glass lenses. In this paper, the principle and conditions of single point diamond turning of chalcogenide glass are introduced. The influences of machine tools, tools and processing technology on surface shape accuracy and surface finish in single point diamond turning processing of chalcogenide glass is reviewed.

Key words: chalcogenide glass, single point diamond turning processing, surface shape accuracy, surface finish, production efficiency

中图分类号:

TQ171

周鹏, 刘永华, 赵华, 张加赢. 硫系玻璃单点金刚石车削技术的研究进展[J]. 硅酸盐通报, 2024, 43(4): 1237-1245.

ZHOU Peng, LIU Yonghua, ZHAO Hua, ZHANG Jiaying. Research Progress of Single Point Diamond Turning Technology for Chalcogenide Glass[J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(4): 1237-1245.

参考文献

[1] 吴海清. 基于硫系玻璃的大视场红外光学系统无热化设计[J]. 红外, 2021, 42(7): 1-8.
WU H Q. Non-thermal design of large field infrared optical system based on chalcogenide glass[J]. Infrared, 2021, 42(7): 1-8 (in Chinese).
[2] LIN X B, WEI M L, LEI K H, et al. Compact Mid-Infrared chalcogenide glass photonic devices based on Robust-Inverse design[J]. Laser & Photonics Reviews, 2023, 17(2): 2200445.
[3] 宋宝安, 王乔方, 张莹昭, 等. 红外硒基硫系玻璃光学非均匀性及影响因素分析[J]. 红外与激光工程, 2012, 41(8): 1985-1989.
SONG B A, WANG Q F, ZHANG Y Z, et al. Optical inhomogeneity of IR Se-based chalcogenide glasses and influencing factor analysis[J]. Infrared and Laser Engineering, 2012, 41(8): 1985-1989 (in Chinese).
[4] ZHOU G J, CHEN J J, SU C R, et al. Multilayered chalcogenide glass with gradient index for reduced SWaP IR optical system[J]. Ceramics International, 2023, 49(20): 32843-32849.
[5] ALAA M, ABBADY G. A thermal analysis study of melt-quenched Zn₅Se₉₅ chalcogenide glass[J]. Journal of Alloys and Compounds, 2020, 818: 152880.
[6] 孙国珍, 许军锋, 王霞. Se-Sb硫系玻璃的制备及性能研究[J]. 冶金与材料, 2018, 38(6): 19-20+23.
SUN G Z, XU J F, WANG X. Preparation and properties of Se-Sb chalcogenide glass[J]. Metallurgy and Materials, 2018, 38(6): 19-20+23 (in Chinese).
[7] XU W N, REN J, CHEN G R. Glass transition kinetics and crystallization mechanism in Ge-Ga-S-CsCl chalcohalide glasses[J]. Journal of Non-Crystalline Solids, 2014, 398/399: 42-47.
[8] MATTHIEU C, CHANELLE A, MYUNGKOO K, et al. Investigation of ZnSe stability and dissolution behavior in As-S-Se chalcogenide glasses[J]. Journal of Non-Crystalline Solids, 2021, 555: 120619.
[9] 李姣姣, 坚增运, 朱满, 等. Ge_xSe_90-xSb₁₀硫系玻璃的热力学特性和动力学脆性研究[J]. 金属学报, 2015, 51(11): 1384-1390.
LI J J, JIAN Z Y, ZHU M, et al. Study on thermodynamic properties and kinetics fragility of Ge_xSe_90-xSb₁₀ chalcogenide glasses[J]. Acta Metallurgica Sinica, 2015, 51(11): 1384-1390 (in Chinese).
[10] TANG L L, ZHOU T F, ZHOU J, et al. Research on single point diamond turning of chalcogenide glass aspheric lens[J]. Procedia CIRP, 2018, 71: 293-298.
[11] BAYINDIR M, SORIN F, ABOURADDY A F, et al. Metal-insulator-semiconductor optoelectronic fibres[J]. Nature, 2004, 431(7010): 826-829.
[12] 肖正航, 孟晓辉, 王国燕. 大口径红外透镜高效制造技术研究[J]. 航天制造技术, 2022(5): 9-12.
XIAO Z H, MENG X H, WANG G Y. Research on efficient manufacturing technology of large aperture infrared lens[J]. Aerospace Manufacturing Technology, 2022(5): 9-12 (in Chinese).
[13] GU S X, HU H P, GUO H T, et al. Second-harmonic generation in transparent surface crystallized GeS₂-Ga₂S₃-CdS chalcogenide glasses[J]. Optics Communications, 2008, 281(9): 2651-2655.
[14] DAI S X, PENG B, ZHANG P J, et al. The near- and mid-infrared emission properties of Tm³⁺-doped GeGaS-CsI chalcogenide glasses[J]. Journal of Non-Crystalline Solids, 2010, 356(44/45/46/47/48/49): 2424-2428.
[15] 樊非, 徐曦, 许乔, 等. 大口径强激光光学元件超精密制造技术研究进展[J]. 光电工程, 2020, 47(8): 5-17.
FAN F, XU X, XU Q, et al. Research progress in ultra-precision manufacturing of large aperture high intensity laser optical components [J]. Opto-electronic Engineering, 2020, 47(8): 5-17 (in Chinese).
[16] XUE D B, WANG P, JIAO L Y, et al. Experimental study on chemical mechanical polishing of chalcogenide glasses[J]. Applied Optics, 2019, 58(8): 1950-1954.
[17] 林常规, 郭小勇, 王先锋, 等. As₂Se₃硫系玻璃非球面镜片的精密模压成型[J]. 红外与激光工程, 2019, 48(7): 137-143.
LIN C G, GUO X Y, WANG X F, et al. Precision molding of As₂Se₃ chalcogenide glass aspheric lens[J]. Infrared and Laser Engineering, 2019, 48(7): 137-143 (in Chinese).
[18] KOHEI K, NAOYUKI K. Recent progress in chalcogenide glasses applicable to infrared optical elements manufactured by molding technology[J]. Journal of the Ceramic Society of Japan, 2022, 130(8): 584-589.
[19] 李池娟, 孙昌峰, 孟凡波, 等. 单点金刚石车削技术的研究[J]. 激光与红外, 2009, 39(12): 1341-1343.
LI C J, SUN C F, MENG F B, et al. Study on single point diamond turning technology[J]. Laser & Infrared, 2009, 39(12): 1341-1343 (in Chinese).
[20] TAUHIDUZZAMAN M, VELDHUIS S C. Effect of material microstructure and tool geometry on surface generation in single point diamond turning[J]. Precision Engineering, 2014, 38(3): 481-491.
[21] 康战, 聂凤明, 刘劲松, 等. 单点金刚石精密数控车削加工技术及发展前景分析[J]. 光学技术, 2010, 36(2): 163-167.
KANG Z, NIE F M, LIU J S, et al. Research on single point diamond precision numerical control turning technique and its development[J]. Optical Technique, 2010, 36(2): 163-167 (in Chinese).
[22] 王朋, 薛栋柏, 张昊, 等. 红外晶体等距恒速单点金刚石车削[J]. 红外与激光工程, 2019, 48(7): 132-136.
WANG P, XUE D B, ZHANG H, et al. ESCV cutting method during infrared crystal single point diamond turning process[J]. Infrared and Laser Engineering, 2019, 48(7): 132-136 (in Chinese).
[23] OWEN J D, DAVIES M A, SCHMID T D, et al. On the ultra-precision diamond machining of chalcogenide glass[J]. CIRP Annals, 2015, 64(1): 113-116.
[24] BAE D S, YEO J B, LEE H Y. A study on a production and processing technique for a GeSbSe aspheric lens with a mid-infrared wavelength band[J]. Journal of the Korean Physical Society, 2013, 62(11): 1610-1615.
[25] TROUTMAN J R, OWEN J D, ZARE A, et al. Cutting mechanics and subsurface integrity in diamond machining of chalcogenide glass[J]. Procedia CIRP, 2016, 45: 135-138.
[26] 李淑萍. ZnSe晶体单点金刚石车削加工技术研究[D]. 昆明: 昆明理工大学, 2017: 13-17.
LI S P. Study on single point diamond turning technology of ZnSe crystal[D]. Kunming: Kunming University of Science and Technology, 2017: 13-17 (in Chinese).
[27] JIANG C, TOVAR C M, STAASMEYER J H, et al. Simulation of the refractive index variation and validation of the form deviation in precisely molded chalcogenide glass lenses (IRG 26) considering the stress and structure relaxation[J]. Materials, 2022, 15(19): 6756.
[28] ZONG W J, HUANG Y H, ZHANG Y L, et al. Conservation law of surface roughness in single point diamond turning[J]. International Journal of Machine Tools and Manufacture, 2014, 84: 58-63.
[29] CHEUNG C F, LEE W B. Characterisation of nanosurface generation in single-point diamond turning[J]. International Journal of Machine Tools and Manufacture, 2001, 41(6): 851-875.
[30] 权艳红. 影响单点金刚石超精密车削加工精度因素的研究[J]. 装备制造技术, 2013(2): 84-86.
QUAN Y H. Affect single point diamond ultra-precision turning machining accuracy factors[J]. Equipment Manufacturing Technology, 2013(2): 84-86 (in Chinese).
[31] 戴玉琦. 单点金刚石车削刀具中心误差在线辨识新方法研究[D]. 深圳: 深圳大学, 2020: 1-5.
DAI Y Q. Research on a new on-line identification method for center error of single point diamond turning tool[D]. Shenzhen: Shenzhen University, 2020: 1-5 (in Chinese).
[32] 兰喜瑞, 张宇佳, 孙宏宇, 等. 大口径ZnSe晶体单点金刚石车削工艺技术研究[J]. 光电技术应用, 2023, 38(3): 72-74+84.
LAN X R, ZHANG Y J, SUN H Y, et al. Single point turning technology of large diameter ZnSe crystals[J]. Electro-Optic Technology Application, 2023, 38(3): 72-74+84 (in Chinese).
[33] LIU X F, ZHANG J J, HU X Y, et al. Influence of tool material and geometry on micro-textured surface in radial ultrasonic vibration-assisted turning[J]. International Journal of Mechanical Sciences, 2019, 152(1): 545 -557.
[34] 陈俊云, 赵清亮, 罗健. 单点金刚石车削中刀具—工件相对振动的研究[J]. 机械工程学报, 2011, 47(17): 135-140.
CHEN J Y, ZHAO Q L, LUO J. Investigation on the relative tool-work vibration in single-point diamond turning[J]. Journal of Mechanical Engineering, 2011, 47(17): 135-140 (in Chinese).
[35] 阴俊峰, 张洪. 影响单点金刚石车削加工质量的因素分析[J]. 机电工程技术, 2014, 43(6): 116-120.
YIN J F, ZHANG H. Analysis on factors influencing single point diamond turning[J]. Mechanical & Electrical Engineering Technology, 2014, 43(6): 116-120 (in Chinese).
[36] ZHANG H, ZHANG Y Q, YU P F, et al. Preparation and thermoelectric properties of novel Tellurium-based glassy semiconductors[J]. Scripta Materialia, 2021, 203: 114038.
[37] PETHES I, CHAHAL R, NAZABAL V, et al. Chemical short-range order in selenide and telluride glasses[J]. The Journal of Physical Chemistry B, 2016, 120(34): 9204-9214.
[38] 陈俊云, 赵清亮. 单点金刚石车削表面粗糙度的研究[J]. 北京工业大学学报, 2012, 38(7): 1013-1019.
CHEN J Y, ZHAO Q L. Investigation of surface roughness in single point diamond turning[J]. Journal of Beijing University of Technology, 2012, 38(7): 1013-1019 (in Chinese).