金属涂层光纤制备方法与性能研究进展

摘要/Abstract

摘要： 金属涂层光纤适用于极端环境下的探测与信息传输。目前,金属涂层光纤研究主要聚焦于:(1)不同制备方法,包括化学镀法、电镀法、溅射法、蒸镀法和熔融金属法的具体制备工艺,比较不同工艺参数对金属涂层质量的影响;(2)金属涂层光纤涂层质量、力学性能和宏弯损耗性能的表征评价方法;(3)金属涂层光纤的应用场景。本文综述了金属涂层光纤制备方法和性能的研究进展,总结了金属涂层光纤目前存在的问题,为金属涂层光纤今后的科学研究和发展提供参考。

关键词: 光纤, 金属涂层, 制备方法, 化学镀, 性能, 应用

Abstract: Metal coated optical fibers are suitable for detection and information transmission in extreme environments. At present, the research on metal coated optical fibers mainly focuses on: (1) the different preparation methods, including electroless plating, electroplating, sputtering, evaporation and molten metal method, and comparing the effects of different process parameters on metal coating quality; (2) characterization and evaluation methods of metal-coated optical fiber coating quality, mechanical properties, and macrobending loss performance; (3) application scenarios of metal coated optical fibers. This paper reviewed the research progress of the preparation methods and properties, summarized the current problems, and provided references for the scientific research and development of metal coated optical fibers.

Key words: optical fiber, metal coating, preparation method, electroless plating, property, application

中图分类号:

TQ171

赵劲凯, 汪洪, 贾金升, 孙勇, 孔壮, 刘波, 杨亮亮, 王一苇. 金属涂层光纤制备方法与性能研究进展[J]. 硅酸盐通报, 2022, 41(11): 3745-3755.

ZHAO Jinkai, WANG Hong, JIA Jinsheng, SUN Yong, KONG Zhuang, LIU Bo, YANG Liangliang, WANG Yiwei. Research Progress on Preparation Method and Property of Metal Coated Optical Fibers[J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2022, 41(11): 3745-3755.

参考文献

[1] 刘建霞.复合波导光纤及其特性研究[D].哈尔滨:哈尔滨工程大学,2015.
LIU J X. Composite waveguides fiber and its characteristics[D]. Harbin: Harbin Engineering University, 2015 (in Chinese).
[2] 徐洪敏,肖丕强,黄小燕.光纤通信网络子信道快速动态分配方法[J].激光杂志,2021,42(11):128-132.
XU H M, XIAO P Q, HUANG X Y. Fast dynamic allocation method of subchannels in optical fiber communication network[J]. Laser Journal, 2021, 42(11): 128-132 (in Chinese).
[3] AGOSTINO I, DANIELE N, PASQUALEDI P, et al. Strain monitoring of a composite drag strut in aircraft landing gear by fiber Bragg grating sensors[J]. Sensors (Basel, Switzerland), 2019, 19(10): 2239.
[4] 袁桂梅,吴美华,张少飞.光纤传感技术在油井分布式测温系统中的应用[J].中国新通信,2018,20(20):97-102.
YUAN G M, WU M H, ZHANG S F. Application of optical fiber sensing technology in oil well distributed temperature measurement system[J]. China New Telecommunications, 2018, 20(20): 97-102 (in Chinese).
[5] LIDIYA A E, RAJA R V J, PHAM V D, et al. Detecting hemoglobin content blood glucose using surface plasmon resonance in D-shaped photonic crystal fiber[J]. Optical Fiber Technology, 2019, 50: 132-138.
[6] 朱建朝,李湘云,冯亚非,等.分布式光纤传感技术在桥梁静载试验中的应用[J].交通科技,2019(2):36-38+47.
ZHU J C, LI X Y, FENG Y F, et al. Application of distributed optical fiber sensing technology in bridge static load test[J]. Transportation Science ＆ Technology, 2019(2): 36-38+47 (in Chinese).
[7] 李卓玥.面向核电装置中的光纤温度和差压传感器应用研究[D].成都:电子科技大学,2020.
LI Z Y. Research on application of optical fiber temperature and differential pressure sensors in nuclear power plants[D]. Chengdu: University of Electronic Science and Technology of China, 2020 (in Chinese).
[8] 张良.大直径超长预制棒拉丝工艺和光纤性能的研究[D].苏州:苏州大学,2016.
ZHANG L. Study on drawing process and properties of large diameter and ultra long optical fiber preform[D]. Suzhou: Soochow University, 2016 (in Chinese).
[9] 俞亮,郭浩林,陆国庆,等.耐高温光纤的性能与生产工艺[J].光通信技术,2014,38(6):8-11.
YU L, GUO H L, LU G Q, et al. Production and performance of heat resistant optical fiber[J]. Optical Communication Technology, 2014, 38(6): 8-11 (in Chinese).
[10] KAZUYUKI S, TOMOYUKI H. Heat-resistant optical fiber coated with newly developed UV curable silicone resins[C]//Proc.of the 60th IWCS, 2011: 424-428.
[11] UMA K C R, DHANALAKSHIMI S, KUMAR R, et al. Computational analysis of thermally induced stress in corrosion-resistant metal coated fiber optic sensors for oceanographic application[J]. Optics, 2019, 195: 163097.
[12] TANGONAN G L, WYSOCKI J A, BLAIR G R, et al. Optical, mechanical, and radiation performance of metal-coated fibers at high temperature[J]. 1984: WF6.
[13] 孙可元.耐温光纤生产工艺及应用[J].现代传输,2015(3):42-43.
SUN K Y. Production technology and application of heat-resistant optical fiber[J]. Modern Transmission, 2015(3): 42-43 (in Chinese).
[14] SIMPKINS P, KURKJIAN C R, SCHROEDER C M. Aluminium-coated silica fibres: strength and solderability[J]. Electronics Letters, 1995, 31(9): 747-749.
[15] 滕睿.石英光纤光栅表面金属化工艺研究[D].大连:大连理工大学,2008.
TENG R. Research on surface metalization of optical fiber grating[D]. Dalian: Dalian University of Technology, 2008 (in Chinese).
[16] 杨晓娟,王绍斌.玻璃纤维化学镀的进展[J].纺织科技进展,2008(4):7-8+14.
YANG X J, WANG S B. Developmet of electroless Ni-P plating on glass fibers[J]. Progress in Textile Science ＆ Technology, 2008(4): 7-8+14 (in Chinese).
[17] 王彭鹏.光纤表面金属化工艺的研究[J].煤矿机械,2013,34(4):160-161.
WANG P P. Optical fiber surface metallization process[J]. Coal Mine Machinery, 2013, 34(4): 160-161 (in Chinese).
[18] 张文禹.光纤光栅表面金属化工艺研究[D].哈尔滨:哈尔滨工业大学,2006.
ZHANG W Y. Research on surface metalization of optical fiber grating[D]. Harbin: Harbin Institute of Technology, 2006 (in Chinese).
[19] 彭健.石英光纤表面的金属化[D].南昌:南昌大学,2007.
PENG J. Metallization of surface of quartez optical fiber[D]. Nanchang: Nanchang University, 2007 (in Chinese).
[20] 白立晓.石英光纤表面化学镀Ni-P和电镀Ni联合工艺研究[D].南昌:南昌大学,2007.
BAI L X. Study on combined technique of electroless plating Ni-P and electroplating Ni on surface of quartz optical fiber[D]. Nanchang: Nanchang University, 2007 (in Chinese).
[21] 姚文历.光纤光栅表面金属化工艺研究[D].济南:山东大学,2013.
YAO W L. Research on surface metallization of optical fiber grating[D]. Jinan: Shandong University, 2013 (in Chinese).
[22] 旷戈,张济宇,钟赟辉.光纤表面金属化工艺的研究[J].电镀与环保,2004,24(2):32-34.
KUANG G, ZHANG J Y, ZHONG Y H. A study of the metallization on quartz of optical fiber[J]. Electroplating ＆ Pollution Control, 2004, 24(2): 32-34 (in Chinese).
[23] 戴兴.金属化在光纤光栅海洋传感器中的应用[D].长春:长春理工大学,2013.
DAI X. Employment of metallization in optical fiber marine sensor[D]. Changchun: Changchun University of Science and Technology, 2013 (in Chinese).
[24] 李小甫,余海湖,姜德生,等.石英玻璃光纤表面化学镀镍[J].光学与光电技术,2003,1(2):33-35.
LI X F, YU H H, JIANG D S, et al. Electroless Ni-plating on quartz optical fiber[J]. Optics ＆ Optoelectronic Technology, 2003, 1(2): 33-35 (in Chinese).
[25] 李小甫,姜德生,余海湖,等.石英光纤表面化学镀镍磷合金工艺[J].化工学报,2005,56(1):126-129.
LI X F, JIANG D S, YU H H, et al. Electroless nickel-phosphor plating process on surface of quartz optical fiber[J]. Journal of Chemical Industry and Engineering, 2005, 56(1): 126-129 (in Chinese).
[26] 刘宏辉.真空离子镀技术在电镀工艺中运用[J].中国石油和化工标准与质量,2021,41(9):171-172.
LIU H H. Application of vacuum ion plate technology in electroplating proces[J]. China Petroleum and Chemical Standard and Quality, 2021, 41(9): 171-172 (in Chinese).
[27] 迟兰州,张声峰,何为.石英光纤表面镀镍钴合金工艺研究[J].电镀与涂饰,1998,17(4):7-8+15.
CHI L Z, ZHANG S F, HE W. Study of electroplating of nickel-cobalt on surface of quartz optical fiber[J]. Electroplating ＆ Finishing, 1998, 17(4): 7-8+15 (in Chinese).
[28] 卫云鸽.石英光纤化学镀镍技术研究[D].成都:电子科技大学,2000.
WEI Y G. Study on electroless nickel plating technology of quartz optical fiber[D]. Chengdu: University of Electronic Science and Technology of China, 2000 (in Chinese).
[29] CHEN D M, DAI X N, TANG Z B. Development of metallized three-directional fibre Bragg grating strain sensor[J]. Journal of Physics: Conference Series, 2020, 1654(1): 012092.
[30] 庄园,周次明,范典.光纤金属涂覆方法研究综述[J].激光与光电子学进展,2022,59(5):27-36.
ZHUANG Y, ZHOU C M, FAN D. Review of metal-coated methods for optical fiber[J]. Laser ＆ Optoelectronics Progress, 2022, 59(5): 27-36 (in Chinese).
[31] 饶春芳.镍金属化光纤光栅特性研究[D].南昌:南昌大学,2012.
RAO C F. A study of features of optical fiber gratings metallized with nickel[D]. Nanchang: Nanchang University, 2012 (in Chinese).
[32] FOX G R, MULLER C A P, SETTER N, et al. Wavelength tunable fiber Bragg grating devices based on sputter deposited resistive and piezoelectric coatings[J]. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 1997, 15(3): 1791-1795.
[33] LI X C, PRINZ F, SEIM J. Thermal behavior of a metal embedded fiber Bragg grating sensor[J]. Smart Materials and Structures, 2001, 10(4): 575-579.
[34] 顾庆昌,程礼友,张万成.耐高温金属衣层光纤及其热应力分析[J].电子工艺技术,2010,31(5):290-292+309.
GU Q C, CHENG L Y, ZHANG W C. Metal-coated optical fibers with high temperature-resistance and analysis of thermal stresses[J]. Electronics Process Technology, 2010, 31(5): 290-292+309 (in Chinese).
[35] 王铭.气相蒸镀法制备新型无铅双钙钛矿薄膜及光电器件[D].成都:电子科技大学,2021.
WANG M. Study on lead-free double perovskites and their optoelectronic devices via vapor deposition processing[D]. Chengdu: University of Electronic Science and Technology of China, 2021 (in Chinese).
[36] 杨邦朝,王文生.薄膜物理与技术[M].成都:电子科技大学出版社,1994.
YANG B C, WANG W S. Thin film physics and technology[M]. Chengdu: University of Electronic Science and Technology Press, 1994 (in Chinese).
[37] SEKAR R, SHIVANANJU B N, LAKSHMI K P, et al. Dual functional performance of fiber Bragg gratings coated with metals using flash evaporation technique[J]. Optical Fiber Technology, 2012, 18(4): 183-185.
[38] DYSHLYUK A V, MITSAI E V, CHEREPAKHIN A B, et al. Surface plasmon resonance in a bent single-mode fiber with a metallized cladding experimental research[J]. Technical Physics Letters, 2017, 43(8): 727-729.
[39] ARRIDGE R G C, BAKER A A, CRATCHLEY D. Metal coated fibres and fibre reinforced metals[J]. Journal of Scientific Instruments, 1964, 41(5): 259-261.
[40] ARRIDGE R G C, HEYWOOD D. The freeze-coating of filaments[J]. British Journal of Applied Physics, 1967, 18(4): 447-457.
[41] SEO H S, PAEK U C, OH K, et al. Melt coating of tin on silica optical fiber[J]. Journal of Lightwave Technology, 1998, 16(12): 2355-2364.
[42] 美国Fiberguide公司.“金属涂层”系列镀金镀铝光纤[J].传感器世界,2010,16(10):37.
American Fiberguide Co., Ltd. “Metal coating” series gold-plated and aluminum-plated optical fibers[J]. Sensor World, 2010, 16(10): 37 (in Chinese).
[43] Anonymous Person. Metal-coated fibres. double-cladding designs and more[J]. Nature Photonics, 2011, 5(8): 473.
[44] SCURTI F, MCGARRAHAN J, SCHWARTZ J. Effects of metallic coatings on the thermal sensitivity of optical fiber sensors at cryogenic temperatures[J]. Optical Materials Express, 2017, 7(6): 1754.
[45] 王友军,邢庆立,蔡小妹,等.金属涂层光纤特性的研究[J].中国建材科技,1992,1(3):34-37.
WANG Y J, XING Q L, CAI X M, et al. The study of characteristics of oprtical fibers with metal coating[J]. Chin Building Materials Science ＆ Technology, 1992, 1(3): 34-37 (in Chinese).
[46] 李好,贺红磊,刘念,等.石英玻璃光纤金属涂层在线制备工艺[J].红外与激光工程,2022,51(4):376-381.
LI H, HE H L, LIU N, et al. Online preparation technology of quartz glass fiber with metal coating[J]. Infrared and Laser Engineering, 2022, 51(4): 376-381 (in Chinese).
[47] 施晓红.涂金属光纤的工艺和增强机理的研究[J].玻璃纤维,1999(3):38-40.
SHI X H. Study on technology and strengthening mechanism of metal coated optical fiber[J]. Fiber Glass, 1999(3): 38-40 (in Chinese).
[48] 姜晓霞,沈伟.化学镀理论及实践[M].北京:国防工业出版社,2000.
JIANG X X, SHEN W. Theory and practice of electroless plating[M]. Beijing: National Defense Industry Press, 2000 (in Chinese).
[49] 姜德生,徐海鹏,李小甫.适用于高温的石英光纤表面金属化的研究[J].武汉理工大学学报,2008,30(4):1-4.
JIANG D S, XU H P, LI X F. Research of quartz optic fiber surface metallization for using in high-temperature[J]. Journal of Wuhan University of Technology, 2008, 30(4): 1-4 (in Chinese).
[50] 殷燕子.耐温光纤布拉格光栅传感器涂层的研究[D].武汉:武汉理工大学,2012.
YIN Y Z. Research on heat resistance coating of optical fiber Bragg grating sensors[D]. Wuhan: Wuhan University of Technology, 2012 (in Chinese).
[51] 张银亮,徒芸,涂善东.多层金属涂覆光纤的界面结合强度[J].机械工程材料,2016,40(3):6-9+14.
ZHANG Y L, TU Y, TU S D. Interfacial bonding strength of multilayer metal-coated optical fiber[J]. Materials for Mechanical Engineering, 2016, 40(3): 6-9+14 (in Chinese).
[52] BUBNOV M M, DIANOV E M, SEMJONOV S L. Influence of residual water on the strength of metal coated optical fibers[J].MRS Online Proceedings Library, 1991, 244(1): 97-101.
[53] CICCOTTI M. Stress-corrosion mechanisms in silicate glasses[J]. Journal of Physics D: Applied Physics, 2009, 42(21): 214006.
[54] 杨珂.金属化光纤光栅抗拉强度及其低温传感特性[D].南昌:南昌大学,2019.
YANG K. Tensile strength and its cryogenic sensing characteristics of the metal coated optic fiber[D]. Nanchang: Nanchang University, 2019 (in Chinese).
[55] SHIUE S T, YANG C H, CHU R S, et al. Effect of the coating thickness and roughness on the mechanical strength and thermally induced stress voids in nickel-coated optical fibers prepared by electroless plating method[J]. Thin Solid Films, 2005, 485(1-2): 169-175.
[56] 张颖,赵俊雪,吴俊,等.偏芯光纤弯曲特性分析[J].光子学报,2017,46(3):114-119.
ZHANG Y, ZHAO J X, WU J, et al. Bendind characteristics analysis of eccentric core optical fiber[J]. Acta Photonica Sinica, 2017, 46(3): 114-119 (in Chinese).
[57] PAKDEEVANICH P. Optical fiber sensor based on a polymer optical fiber macro-bend to study thermal expansion of metals[J]. Journal of Physics: Conference Series, 2018, 1027: 012007.
[58] 彭星玲.金属化单模光纤宏弯损耗特性研究[D].南昌:南昌大学,2015.
PENG X L. A study of macrobending loss characteristics of single-mode fibers with metallic coating[D]. Nanchang: Nanchang University, 2015 (in Chinese).
[59] 姜智超.金属化光纤Bragg光栅钎焊智能金属结构[D].南昌:南昌大学,2012.
JIANG Z C. Smart metal structure with surface mounted in-fiber Bragg grating by using soldering method[D]. Nanchang: Nanchang University, 2012 (in Chinese).
[60] LI Y L, YANG K, LI X W. Temperature sensing characteristics of metal coated FBG during dynamic cooling process[J]. Optical Fiber Technology, 2018, 45: 368-375.
[61] 江建锋.金属化长周期光纤光栅传感机理建模及强度波分复用[D].南昌:南昌大学,2018.
JIANG J F. Modeling of metallization long period fiber grating sensing mechanism and intensity wavelength division multiplexing[D]. Nanchang: Nanchang University, 2018 (in Chinese).
[62] SANDLIN S, KINNUNEN T, RÄMÖ J, et al. A simple method for metal re-coating of optical fibre Bragg gratings[J]. Surface and Coatings Technology, 2006, 201(6): 3061-3065.
[63] 宋路发.光纤布拉格光栅金属化保护及温度传感特性[D].南昌:南昌大学,2007.
SONG L F. Metalizing protecting and temperature sensing property of fiber Bragg grating[D]. Nanchang: Nanchang University, 2007 (in Chinese).
[64] LI Y L, ZHANG H, FENG Y, et al. A plating method for metal coating of fiber Bragg grating[J]. Chinese Optics Letters, 2009, 7(2): 115-117.
[65] 兰健.金属包覆Bragg光栅传感器的制备与性能研究[D].沈阳:沈阳航空航天大学,2012.
LAN J. Study on preparation and performance of metal-coated Bragg grating sensor[D]. Shenyang: Shenyang Aerospace University, 2012 (in Chinese).
[66] ALEMOHAMMAD H, TOYSERKANI E. Metal embedded optical fiber sensors: laser-based layered manufacturing procedures[J]. Journal of Manufacturing Science and Engineering, 2011, 133(3): 031015.
[67] HSIAO T C, HSIEH T S, CHEN Y C, et al. Metal-coated fiber Bragg grating for dynamic temperature sensor[J]. Optik, 2016, 127(22): 10740-10745.
[68] 王裕波.光纤传感器激光焊接封装及其热压传感特性[D].南昌:南昌大学,2017.
WANG Y B. Temperature and strain sensing properties of fiber optic sensor packaged by laser welding[D]. Nanchang: Nanchang University, 2017 (in Chinese).
[69] LU Y, SHI B, WEI G Q, et al. Application of a distributed optical fiber sensing technique in monitoring the stress of precast piles[J]. Smart Materials and Structures, 2012, 21(11): 115011.
[70] LO Y L, LIN Y C, CHEN Y M. Athermal fibre Bragg grating strain gauge with metal coating in measurement of thermal expansion coefficient[J]. Sensors and Actuators A: Physical, 2005, 117(1): 103-109.
[71] HU W B, CAI H L, YANG M H, et al. Fe-C-coated fibre Bragg grating sensor for steel corrosion monitoring[J]. Corrosion Science, 2011, 53(5): 1933-1938.
[72] GANESH R S, NAVANEETHAN M, PATIL V L, et al. Sensitivity enhancement of ammonia gas sensor based on Ag/ZnO flower and nanoellipsoids at low temperature[J]. Sensors and Actuators B: Chemical, 2018, 255: 672-683.
[73] MILIUTINA E, GUSELNIKOVA O, CHUFISTOVA S, et al. Fast and all-optical hydrogen sensor based on gold-coated optical fiber functionalized with metal-organic framework layer[J]. ACS Sensors, 2019, 4(12): 3133-3140.
[74] 王旗旗.金属/金属氧化物涂覆微光纤传感特性研究[D].西安:西安石油大学,2020.
WANG Q Q. Study on sensing characteristics of metal/metal-oxide coated microfiber[D]. Xi’an: Xi’an Shiyou University, 2020 (in Chinese).
[75] 马金英,刘铁根,江俊峰,等.光纤表面等离子体共振传感灵敏度提高研究进展[J].中国激光,2021,48(19):99-112.
MA J Y, LIU T G, JIANG J F, et al. Progress in sensitivity enhancement for optical fibre surface plasmon resonance sensing[J]. Chinese Journal of Lasers, 2021, 48(19): 99-112 (in Chinese).
[76] VERMA R, GUPTA B D. Detection of heavy metal ions in contaminated water by surface plasmon resonance based optical fibre sensor using conducting polymer and chitosan[J]. Food Chemistry, 2015, 166: 568-575.
[77] SHRIVASTAV A M, USHA S P, GUPTA B D. Highly sensitive and selective erythromycin nanosensor employing fiber optic SPR/ERY imprinted nanostructure: application in milk and honey[J]. Biosensors and Bioelectronics, 2017, 90: 516-524.