欢迎访问《硅酸盐通报》官方网站,今天是
分享到:

硅酸盐通报 ›› 2022, Vol. 41 ›› Issue (5): 1821-1829.

• 新型功能材料 • 上一篇    下一篇

纳米Fe3O4/皂石复合材料的制备及去除2,4-二氯苯酚的性能研究

吴丽梅1, 刘龑1, 王晓龙2, 唐宁1, 王晴1   

  1. 1.沈阳建筑大学材料科学与工程学院,沈阳 110168;
    2.沈阳建筑大学机械工程学院,沈阳 110168
  • 收稿日期:2021-12-16 修回日期:2022-01-13 出版日期:2022-05-15 发布日期:2022-06-01
  • 作者简介:吴丽梅(1986—),女,博士,副教授。主要从事矿物基环境材料的研究。E-mail:lmwu@sjzu.edu.cn
  • 基金资助:
    “兴辽英才计划”青年拔尖人才(XLYC2007105);辽宁省自然科学基金面上项目(2020-MS-202)

Preparation of Nano-Fe3O4/Saponite Composites and Removal Performance of 2,4-Dichlorophenol

WU Limei1, LIU Yan1, WANG Xiaolong2, TANG Ning1, WANG Qing1   

  1. 1. School of Materials Science and Engineering, Shenyang Jianzhu University, Shenyang 110168, China;
    2. School of Mechanical Engineering, Shenyang Jianzhu University, Shenyang 110168, China
  • Received:2021-12-16 Revised:2022-01-13 Online:2022-05-15 Published:2022-06-01

摘要: 本文以水热合成法和共沉淀法制备了纳米Fe3O4/皂石复合材料,并用于去除水中2,4-二氯苯酚(2,4-DCP)。采用X射线衍射(XRD)、傅里叶变换红外光谱(FTIR)、扫描电镜(SEM)、透射电子显微镜(TEM)和X射线荧光光谱(XRF)等表征手段测试了纳米Fe3O4/皂石复合材料的物相组成、结构、形貌和元素组成,并考察了纳米Fe3O4/皂石复合材料在不同2,4-DCP溶液浓度、反应时间和pH等条件下对2,4-DCP的去除效果。结果表明,在皂石表面原位生长的纳米Fe3O4分散较为均匀,有效降低了Fe3O4的团聚现象。纳米Fe3O4/皂石复合材料在溶液pH值为6时,对2,4-DCP的最大去除量为178.46 mg/g,在反应时间为5 min时,对2,4-DCP去除量达到饱和。纳米Fe3O4/皂石复合材料对2,4-DCP的去除动力学符合准二级动力学模型。在此基础上,通过液相质谱联用(LC-MS)检测出2,4-DCP被降解后生成了氯酚等中间产物。本研究成果为水中有机污染物的降解提供了一种新型、环保且高效的环境功能材料。

关键词: 纳米Fe3O4, 皂石, 复合材料, 吸附-降解, 2,4-二氯苯酚, 水污染

Abstract: In this study, the nano-Fe3O4/saponite composites were prepared by hydrothermal synthesis and coprecipitation method, and used to remove 2,4-dichlorophenol (2,4-DCP) from water. The phase composition, structure, morphology and elemental composition of nano-Fe3O4/saponite composites were characterized by X-ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray fluorescence (XRF). The removal efficiency of 2,4-DCP by nano-Fe3O4/saponite composites under solution with different 2,4-DCP concentration, reaction time and pH were investigated. The results show that the in-situ growth of nano-Fe3O4 on the surface of saponite is more evenly dispersed, which effectively reduces the agglomeration of Fe3O4. The maximum removal of 2,4-DCP by nano-Fe3O4/saponite composites is 178.46 mg/g when the pH value is 6, and the removal of 2,4-DCP reaches saturation when the reaction time is 5 min. The removal kinetics of 2,4-DCP by nano-Fe3O4/saponite composites accords with the pseudo-second-order kinetic model. On this basis, liquid chromatography-mass spectrometry (LC-MS) analysis shows that 2,4-DCP is degraded into chlorophenol and other intermediate products. The research results provide a new, environmentally-friendly and efficient environmental functional material for the degradation of organic pollutants in water.

Key words: nano-Fe3O4, saponite, composite, adsorption-degradation, 2,4-dichlorophenol, water pollution

中图分类号: