知识图谱视角下耐火材料的研究发展

摘要/Abstract

摘要： 耐火材料是高温工业重要的支撑材料,随着相关技术的不断发展,已经积累了海量的文献。然而使用传统方法阅读如此众多的文献存在较大的困难,进一步对其进行分析归纳则难度更大,因而以往的做法常是凭借经验选择代表性文献进行总结分析。但该方法难以对研究动态有全面、定量、深入的分析与归纳,不利于系统地把握发展现状及趋势,已经逐渐难以适应科学研究的未来需要。本工作从知识图谱视角对耐火材料研究的现状进行归纳和总结,对中国知网和WOS(Web of Science)核心数据库中的众多文献进行分析,分别从中国和世界范围介绍了耐火材料领域研究的整体发展脉络,并以含碳耐火材料为例介绍了领域内的研究热点与趋势,最后对耐火材料及知识图谱的未来发展作出了展望。

关键词: 知识图谱, 耐火材料, 发展脉络, 研究热点, VOSviewer, CiteSpace

Abstract: Refractories are important supporting materials for high-temperature industry. With the continuous development of related technologies, a large amount of literature has been accumulated. However, it is difficult to read so much literature with traditional methods, and it is more difficult to further analyze and summarize them. Therefore, in the past, personal experience was often based on selecting representative literature for summary and analysis. However, this method is difficult to have a comprehensive, quantitative and in-depth analysis and induction of research trends, which is not conducive to systematically grasp its development status and trends, and has gradually become difficult to meet the future needs of scientific research. This work summarizes the current situation of refractory research from the perspective of knowledge graph. By using CNKI and WOS (Web of Science) core database, the overall development venation of refractory research from the scope of China and the world is introduced, and the research hotspots and trends in the field of carbon containing refractories are introduced. At last, the future development of refractories and knowledge map has prospected.

Key words: knowledge graph, refractory, development venation, research hotspot, VOSviewer, CiteSpace

中图分类号:

TQ175.71

王玉龙, 王周福, 王玺堂, 刘浩, 马妍, 姜鹏程. 知识图谱视角下耐火材料的研究发展[J]. 硅酸盐通报, 2022, 41(12): 4444-4457.

WANG Yulong, WANG Zhoufu, WANG Xitang, LIU Hao, MA Yan, JIANG Pengcheng. Research Development of Refractories from Perspective of Knowledge Graph[J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2022, 41(12): 4444-4457.

参考文献

[1] 康鑫,张利新,邓俊杰,等.Cr₂O₃微粉加入量对Al₂O₃-Cr₂O₃质耐火材料性能的影响[J].硅酸盐通报,2021,40(10):3285-3291.
KANG X, ZHANG L X, DENG J J, et al. Effect of addition of Cr₂O₃ micropowder on properties of Al₂O₃-Cr₂O₃ refractory[J]. Bulletin of the Chinese Ceramic Society, 2021, 40(10): 3285-3291 (in Chinese).
[2] 王玉龙,王玺堂,王周福,等.高纯二氧化硅微粉含量对Al₂O₃-SiC-C铁沟渣线浇注料性能的影响[J].硅酸盐通报,2019,38(4):1050-1055.
WANG Y L, WANG X T, WANG Z F, et al. Effect of high purity micro-silica powder content on properties of Al₂O₃-SiC-C castable for slag line of iron tunner[J]. Bulletin of the Chinese Ceramic Society, 2019, 38(4): 1050-1055 (in Chinese).
[3] 王玉龙,王玺堂,王周福,等.氮化硅-氧氮化硅复合粉对Al₂O₃-SiC-C铁沟料性能的影响[J].耐火材料,2019,53(6):419-422.
WANG Y L, WANG X T, WANG Z F, et al. Effect of Si₃N₄-Si₂N₂O composite powder on properties of Al₂O₃-SiC-C castables for iron runner[J]. Refractories, 2019, 53(6): 419-422 (in Chinese).
[4] 李红霞.耐火材料发展概述[J].无机材料学报,2018,33(2):198-205.
LI H X. Development overview of refractory materials[J]. Journal of Inorganic Materials, 2018, 33(2): 198-205 (in Chinese).
[5] 王玉龙,李享成,陈平安,等.硅-铝溶胶作为耐火浇注料胶结剂的研究现状与展望[J].硅酸盐学报,2017,45(3):422-432.
WANG Y L, LI X C, CHEN P G, et al. Recent development and prospects on silica-alumina colloidal bonded refractory castables[J]. Journal of the Chinese Ceramic Society, 2017, 45(3): 422-432 (in Chinese).
[6] 王玉龙,王周福,王玺堂,等.耐火浇注料防爆裂研究进展[J].硅酸盐学报,2022,50(6):1762-1774.
WANG Y L, WANG Z F, WANG X T, et al. Research progress on anti-spalling of refractory castables[J]. Journal of the Chinese Ceramic Society, 2022, 50(6): 1762-1774 (in Chinese).
[7] VAN ECK N J, WALTMAN L, NOYONS E C M, et al. Automatic term identification for bibliometric mapping[J]. Scientometrics, 2010, 82(3): 581-596.
[8] CHEN C M, IBEKWE-SANJUAN F, HOU J H. The structure and dynamics of cocitation clusters: a multiple-perspective cocitation analysis[J]. Journal of the American Society for Information Science and Technology, 2010, 61(7): 1386-1409.
[9] LEE W E, MOORE R E. Evolution of in situ refractories in the 20th century[J]. Journal of the American Ceramic Society, 2005, 81(6): 1385-1410.
[10] FUHRER M, HEY A, LEE W E. Microstructural evolution in self-forming spinel/calcium aluminate-bonded castable refractories[J]. Journal of the European Ceramic Society, 1998, 18(7): 813-820.
[11] LEE W E, ZHANG S. Melt corrosion of oxide and oxide-carbon refractories[J]. International Materials Reviews, 1999, 44(3): 77-104.
[12] EWAIS E M M. Carbon based refractories[J]. Journal of the Ceramic Society of Japan, 2004, 112(1310): 517-532.
[13] ANEZIRIS C G, HUBÁLKOVÁ J, BARABÁS R. Microstructure evaluation of MgO-C refractories with TiO₂- and Al-additions[J]. Journal of the European Ceramic Society, 2007, 27(1): 73-78.
[14] SCHNEIDER H, SCHREUER J, HILDMANN B. Structure and properties of mullite: a review[J]. Journal of the European Ceramic Society, 2008, 28(2): 329-344.
[15] GOKCE A S, GURCAN C, OZGEN S, et al. The effect of antioxidants on the oxidation behaviour of magnesia-carbon refractory bricks[J]. Ceramics International, 2008, 34(2): 323-330.
[16] BRAULIO M A L, RIGAUD M, BUHR A, et al. Spinel-containing alumina-based refractory castables[J]. Ceramics International, 2011, 37(6): 1705-1724.
[17] ROUNGOS V, ANEZIRIS C G. Improved thermal shock performance of Al₂O₃-C refractories due to nanoscaled additives[J]. Ceramics International, 2012, 38(2): 919-927.
[18] BAG M, ADAK S, SARKAR R. Study on low carbon containing MgO-C refractory: use of nano carbon[J]. Ceramics International, 2012, 38(3): 2339-2346.
[19] BRAULIO M A L, MARTINEZ A G T, LUZ A P, et al. Basic slag attack of spinel-containing refractory castables[J]. Ceramics International, 2011, 37(6): 1935-1945.
[20] MUKHOPADHYAY S, DAS PODDAR P K. Effect of preformed and in situ spinels on microstructure and properties of a low cement refractory castable[J]. Ceramics International, 2004, 30(3): 369-380.
[21] FAHRENHOLTZ W G, HILMAS G E, TALMY I G, et al. Refractory diborides of zirconium and hafnium[J]. Journal of the American Ceramic Society, 2007, 90(5): 1347-1364.
[22] RIBEIRO S, RODRIGUES J A. The influence of microstructure on the maximum load and fracture energy of refractory castables[J]. Ceramics International, 2010, 36(1): 263-274.
[23] BAVAND-VANDCHALI M, GOLESTANI-FARD F, SARPOOLAKY H, et al. The influence of in situ spinel formation on microstructure and phase evolution of MgO-C refractories[J]. Journal of the European Ceramic Society, 2008, 28(3): 563-569.
[24] CAMPOS K S, LENZ E SILVA G F B, NUNES E H M, et al. The influence of B₄C and MgB₂ additions on the behavior of MgO-C bricks[J]. Ceramics International, 2012, 38(7): 5661-5667.
[25] BRAULIO M A L, BITTENCOURT L R M, PANDOLFELLI V C. Magnesia grain size effect on in situ spinel refractory castables[J]. Journal of the European Ceramic Society, 2008, 28(15): 2845-2852.
[26] ANEZIRIS C G, KLIPPEL U, SCHÄRFL W, et al. Functional refractory material design for advanced thermal shock performance due to titania additions[J]. International Journal of Applied Ceramic Technology, 2007, 4(6): 481-489.
[27] KUN P, TAPASZTÓ O, WÉBER F, et al. Determination of structural and mechanical properties of multilayer graphene added silicon nitride-based composites[J]. Ceramics International, 2012, 38(1): 211-216.
[28] ZHANG S, MARRIOTT N J, LEE W E. Thermochemistry and microstructures of MgO-C refractories containing various antioxidants[J]. Journal of the European Ceramic Society, 2001, 21(8): 1037-1047.
[29] FAN H B, LI Y W, SANG S B. Microstructures and mechanical properties of Al₂O₃-C refractories with silicon additive using different carbon sources[J]. Materials Science and Engineering: A, 2011, 528(7/8): 3177-3185.
[30] HASSELMAN D P H. Unified theory of thermal shock fracture initiation and crack propagation in brittle ceramics[J]. Journal of the American Ceramic Society, 1969, 52(11): 600-604.
[31] DING D H, LV L H, XIAO G Q, et al. Improved properties of low-carbon MgO-C refractories with the addition of multilayer graphene/MgAl₂O₄ composite powders[J]. International Journal of Applied Ceramic Technology, 2020, 17(2): 645-656.
[32] WANG Q H, LI Y W, JIN S L, et al. Enhanced mechanical properties of Al₂O₃-C refractories with silicon hybridized expanded graphite[J]. Materials Science and Engineering: A, 2018, 709: 160-171.
[33] YU C, ZHU H X, YUAN W J, et al. Synthesis of monophase Al₄O₄C and the effect of Al₄O₄C addition to MgO-C refractory[J]. Journal of Alloys and Compounds, 2013, 579: 348-354.
[34] NIGHTINGALE S A, MONAGHAN B J, BROOKS G A. Degradation of MgO refractory in CaO-SiO₂-MgO-FeO_x and CaO-SiO₂-Al₂O₃-MgO-FeO_x slags under forced convection[J]. Metallurgical and Materials Transactions B, 2005, 36(4): 453-461.
[35] JANSSON S, BRABIE V, JONSSON P. Corrosion mechanism and kinetic behaviour of MgO-C refractory material in contact with CaO-Al₂O₃-SiO₂-MgO slag[J]. Scandinavian Journal of Metallurgy, 2005, 34(5): 283-292.
[36] HONG L, SAHAJWALLA V. Investigation of in situ chemical reactions of Al₂O₃-SiC-SiO₂-C refractory and its interactions with slag[J]. ISIJ International, 2004, 44(5): 785-789.
[37] XU R Z, ZHANG J L, FAN X Y, et al. Effect of MnO on high-alumina slag viscosity and corrosion behavior of refractory in slags[J]. ISIJ International, 2017, 57(11): 1887-1894.
[38] BRABIE V. A study on the mechanism of reaction between refractory materials and aluminium deoxidised molten steel[J]. Steel Research, 1997, 68: 54-60.
[39] SASAI K, MIZUKAMI Y. Reaction mechanism between alumina graphite immersion nozzle and low carbon steel[J]. ISIJ International, 1993, 34: 802-809.
[40] CHEN X L, LI Y W, LI Y B, et al. Effect of temperature on the properties and microstructures of carbon refractories for blast furnace[J]. Metallurgical and Materials Transactions A, 2009, 40(7): 1675-1683.
[41] LUO M, LI Y W, JIN S L, et al. Microstructures and mechanical properties of Al₂O₃-C refractories with addition of multi-walled carbon nanotubes[J]. Materials Science and Engineering: A, 2012, 548: 134-141.
[42] DING J, DENG C J, YUAN W J, et al. Novel synthesis and characterization of silicon carbide nanowires on graphite flakes[J]. Ceramics International, 2014, 40(3): 4001-4007.
[43] LIU B, SUN J L, TANG G S, et al. Effects of nanometer carbon black on performance of low-carbon MgO-C composites[J]. Journal of Iron and Steel Research, International, 2010, 17(10): 75-78.
[44] ZHANG S, LEE W E. Influence of additives on corrosion resistance and corroded microstructures of MgO-C refractories[J]. Journal of the European Ceramic Society, 2001, 21(13): 2393-2405.
[45] ZHU T B, LI Y W, JIN S L, et al. Microstructure and mechanical properties of MgO-C refractories containing expanded graphite[J]. Ceramics International, 2013, 39(4): 4529-4537.