纤维对3D打印混凝土打印性能与力学性能的影响

硅酸盐通报 ›› 2021, Vol. 40 ›› Issue (6): 1870-1878.

• 3D 打印水泥基材料 • 上一篇下一篇

纤维对3D打印混凝土打印性能与力学性能的影响

张超¹, 邓智聪¹, 汪智斌¹, 侯泽宇¹, 贾子健¹, 王香港^1,2, 贾鲁涛^1,2, 陈春^1,2, 孙正明¹, 张亚梅^1,2, 潘金龙^2,3

1.东南大学材料科学与工程学院,江苏省土木工程材料重点实验室,南京 211189;
2.南京绿色增材智造研究院有限公司,南京 210000;
3.东南大学土木工程学院,混凝土及预应力混凝土教育部重点试验室,南京 211189

收稿日期:2021-02-25 修回日期:2021-04-08 出版日期:2021-06-15 发布日期:2021-07-08
通讯作者: 张亚梅,博士,教授。E-mail:ymzhang@seu.edu.cn
作者简介:张超(1992—),男,博士研究生。主要从事3D打印混凝土的研究。E-mail:xyzhangc@163.com
基金资助:
国家重点研发计划(2018YFC0705800,2017YFC0703700)

Effects of Fibers on Printing Performance and Mechanical Properties of 3D Printing Concrete

ZHANG Chao¹, DENG Zhicong¹, WANG Zhibin¹, HOU Zeyu¹, JIA Zijian¹, WANG Xianggang^1,2, JIA Lutao^1,2, CHEN Chun^1,2, SUN Zhengming¹, ZHANG Yamei^1,2, PAN Jinlong^2,3

1. Jiangsu Key Laboratory of Construction Materials, School of Materials Science and Engineering, Southeast University, Nanjing 211189, China;
2. Nanjing Institute for Intelligent Additive Manufacturing Co., Ltd., Nanjing 210000, China;
3. Key Laboratory of Concrete &Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University, Nanjing 211189, China

Received:2021-02-25 Revised:2021-04-08 Online:2021-06-15 Published:2021-07-08

摘要/Abstract

摘要： 为了研究纤维掺入对3D打印混凝土(3DPC)性能的影响,通过掺入聚乙烯醇(PVA)、聚丙烯(PP)纤维以及剑麻纤维,探究了纤维对3DPC流变性能、打印性能、力学性能以及孔结构的影响规律。流变性能测试结果表明,3DPC的静态屈服应力与三种纤维的掺量均呈线性上升关系,但纤维对3DPC流变性能的影响程度有所差异。打印性能测试结果表明PVA纤维的掺入会降低3DPC的可挤出性,但能明显提高挤出后混凝土的尺寸均匀性。力学性能与孔结构的测试结果表明,PP纤维对3DPC抗压强度有明显的提升效果,剑麻纤维对3DPC抗折强度有最显著的增强效果,而纤维掺量提高会降低3DPC表观密度,使内部孔隙率增加,从而导致高掺量纤维的增强效果弱于低掺量纤维。

关键词: 3D打印混凝土, 纤维, 流变性能, 打印性能, 力学性能, 孔结构

Abstract: In order to investigate the effects of fiber on the performance of 3D printing concrete (3DPC), the influence of fiber on the rheological properties, printing properties, mechanical properties, and pore structure of 3DPC were studied by adding PVA fiber, PP fiber, and sisal fiber. The result of the rheological property test shows that the static yield stress of 3DPC increases linearly with the content of three kinds of fiber, but the influence of fiber on the rheological property of 3DPC is different. The results of printing performance test indicate that the addition of PVA fiber reduces the extrudability of 3DPC, but it significantly improves the size uniformity of extruded concrete. The test results of mechanical properties and pore structure point out that PP fiber significantly improves the compressive strength of 3DPC, sisal fiber has the most significant strengthening effect on the flexural strength of 3DPC, and the increase of fiber content will reduce the apparent density of 3DPC and increase the internal porosity, resulting in the reinforcement effect of high fiber content is weaker than that of low fiber content.

Key words: 3D printing concrete, fiber, rheological performance, printing performance, mechanical property, pore structure

中图分类号:

TU528

张超, 邓智聪, 汪智斌, 侯泽宇, 贾子健, 王香港, 贾鲁涛, 陈春, 孙正明, 张亚梅, 潘金龙. 纤维对3D打印混凝土打印性能与力学性能的影响[J]. 硅酸盐通报, 2021, 40(6): 1870-1878.

ZHANG Chao, DENG Zhicong, WANG Zhibin, HOU Zeyu, JIA Zijian, WANG Xianggang, JIA Lutao, CHEN Chun, SUN Zhengming, ZHANG Yamei, PAN Jinlong. Effects of Fibers on Printing Performance and Mechanical Properties of 3D Printing Concrete[J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2021, 40(6): 1870-1878.

参考文献

[1] 石从黎,林宗浩,陈敬,等.3D打印混凝土技术的初探[J].重庆建筑,2017,16(3):24-27.
SHI C L, LIN Z H, CHEN J, et al. Preliminary study on 3D printing technology for concrete[J]. Chongqing Architecture, 2017, 16(3): 24-27 (in Chinese).
[2] LEE J Y, AN J, CHUA C K. Fundamentals and applications of 3D printing for novel materials[J]. Applied Materials Today, 2017, 7: 120-133.
[3] ZHANG J C, WANG J L, DONG S F, et al. A review of the current progress and application of 3D printed concrete[J]. Composites Part A: Applied Science and Manufacturing, 2019, 125: 105533.
[4] 王里,王伯林,白刚,等.3D打印混凝土各向异性力学性能研究[J].实验力学,2020,35(2):243-250.
WANG L, WANG B L, BAI G, et al. Experimental study on the mechanical anisotropy of 3D printed concrete[J]. Journal of Experimental Mechanics, 2020, 35(2): 243-250 (in Chinese).
[5] LIM S, BUSWELL R A, LE T T, et al. Developments in construction-scale additive manufacturing processes[J]. Automation in Construction, 2012, 21: 262-268.
[6] PERKINS I, SKITMORE M. Three-dimensional printing in the construction industry: a review[J]. International Journal of Construction Management, 2015, 15: 1-9.
[7] ZHANG C, HOU Z Y, CHEN C, et al. Design of 3D printable concrete based on the relationship between flowability of cement paste and optimum aggregate content[J]. Cement and Concrete Composites, 2019, 104: 103406.
[8] BUSWELL R A, LEAL DE SILVA W R, JONES S Z, et al. 3D printing using concrete extrusion: a roadmap for research[J]. Cement and Concrete Research, 2018, 112: 37-49.
[9] DE SCHUTTER G, LESAGE K, MECHTCHERINE V, et al. Vision of 3D printing with concrete: technical, economic and environmental potentials[J]. Cement and Concrete Research, 2018, 112: 25-36.
[10] 王香港,王申,贾鲁涛,等.3D打印混凝土技术在新冠肺炎防疫方舱中的应用[J].混凝土与水泥制品,2020(4):1-4+13.
WANG X G, WANG S, JIA L T, et al. Application of 3D printing technology in epidemic prevention cabins during the outbreak of COVID-19[J]. China Concrete and Cement Products, 2020(4): 1-4+13 (in Chinese).
[11] MECHTCHERINE V, NERELLA V N, WILL F, et al. Large-scale digital concrete construction-CONPrint3D concept for on-site, monolithic 3D-printing[J]. Automation in Construction, 2019, 107: 102933.
[12] LU B, WENG Y W, LI M Y, et al. A systematical review of 3D printable cementitious materials[J]. Construction and Building Materials, 2019, 207: 477-490.
[13] MOELICH G M, KRUGER J, COMBRINCK R. Plastic shrinkage cracking in 3D printed concrete[J]. Composites Part B: Engineering, 2020, 200: 108313.
[14] PANDA B, CHANDRA PAUL S, JEN TAN M. Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material[J]. Materials Letters, 2017, 209: 146-149.
[15] MA G W, LI Z J, WANG L, et al. Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing[J]. Construction and Building Materials, 2019, 202: 770-783.
[16] SHAKOR P, NEJADI S, PAUL G. A study into the effect of different nozzles shapes and fibre-reinforcement in 3D printed mortar[J]. Materials, 2019, 12(10): 1708.
[17] 占羿箭.纤维增强3D打印混凝土受剪破坏数值模拟[J].江西科学,2017,35(6):927-932.
ZHAN Y J. Numerical simulation of the failure behavior of 3D-printed concrete with fiber reinforcement[J]. Jiangxi Science, 2017, 35(6): 927-932 (in Chinese).
[18] 孙晓燕,汪群,王海龙,等.多壁碳纳米管对3D打印混凝土性能影响试验研究[J].新型建筑材料,2020,47(1):27-29+37.
SUN X Y, WANG Q, WANG H L, et al. Study on effect of multi-walled nanotubes(MWNTs) on properties of 3D printing concrete[J]. New Building Materials, 2020, 47(1): 27-29+37 (in Chinese).[19] 汪群,高超.PVA纤维在3D打印混凝土中的应用研究[J].低温建筑技术,2019,41(4):3-6.
WANG Q, GAO C. Study on the application of PVA fiber in 3D printing concrete[J]. Low Temperature Architecture Technology, 2019, 41(4): 3-6 (in Chinese).
[20] LONG W J, TAO J L, LIN C, et al. Rheology and buildability of sustainable cement-based composites containing micro-crystalline cellulose for 3D-printing[J]. Journal of Cleaner Production, 2019, 239: 118054.
[21] PAUL S C, TAY Y W D, PANDA B, et al. Fresh and hardened properties of 3D printable cementitious materials for building and construction[J]. Archives of Civil and Mechanical Engineering, 2018, 18(1): 311-319.

纤维对3D打印混凝土打印性能与力学性能的影响

Effects of Fibers on Printing Performance and Mechanical Properties of 3D Printing Concrete

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	丁少沛, 王健涛, 刘云鹏, 何永佳. 养护条件对EVA乳液改性水泥浆体水化行为和孔结构的影响[J]. 硅酸盐通报, 2021, 40(7): 2145-2151.
[2]	陈梦竹, 余林文, 袁慧慧, 郑海兵, 吴芳, 蔡渝新, 李伟华. 木质素磺酸钠改性Ca-LDH对水泥基材料性能的影响[J]. 硅酸盐通报, 2021, 40(7): 2152-2158.
[3]	焦敏. 氧化石墨烯对新拌水泥浆体流变性的影响[J]. 硅酸盐通报, 2021, 40(7): 2159-2164.
[4]	赵楠, 卿龙邦, 杨卓凡, 慕儒. 不同龄期钢纤维增强水泥砂浆纤维拉拔试验与模拟研究[J]. 硅酸盐通报, 2021, 40(7): 2165-2173.
[5]	张成龙, 刘漪, 张明. PP/PVA纤维增强硫铝酸盐水泥基快速修补材料试验研究[J]. 硅酸盐通报, 2021, 40(7): 2174-2183.
[6]	张广泰, 耿天娇, 鲁海波, 王明阳, 李雪藩. 冻融循环下沙漠砂纤维混凝土损伤模型研究[J]. 硅酸盐通报, 2021, 40(7): 2225-2231.
[7]	姚苏琴, 查文华, 刘新权, 季圣星, 何昌春, 余跃. 萍乡废弃煤矸石理化特性及热活化性能研究[J]. 硅酸盐通报, 2021, 40(7): 2280-2287.
[8]	刘雅琦, 王淑娟, 李立新. 高炉镍铁渣和钢纤维改性混凝土的耐热性和热损伤规律[J]. 硅酸盐通报, 2021, 40(7): 2320-2330.
[9]	范小春, 张雯静, 梁天福, 陈凯风. 回收轮胎钢纤维再生骨料混凝土基本力学性能试验研究[J]. 硅酸盐通报, 2021, 40(7): 2331-2340.
[10]	黄开林, 李书进, 臧旭航. 不同类型再生细骨料对保温混凝土力学性能的影响[J]. 硅酸盐通报, 2021, 40(7): 2341-2347.
[11]	阿拉腾沙嘎, 陈冠宏, 陈星. 磁场作用下冷冻铸造法制备仿生材料研究进展[J]. 硅酸盐通报, 2021, 40(7): 2348-2359.
[12]	李宝玉. 石墨烯/聚乙烯复合改性沥青胶结料的流变性能研究[J]. 硅酸盐通报, 2021, 40(7): 2461-2468.
[13]	张超, 邓智聪, 马蕾, 刘超, 陈宇宁, 汪智斌, 贾子健, 王香港, 贾鲁涛, 陈春, 孙正明, 张亚梅. 3D打印混凝土研究进展及其应用[J]. 硅酸盐通报, 2021, 40(6): 1769-1795.
[14]	张翼, 朱艳梅, 任强, 蒋正武. 3D打印建筑技术及其水泥基材料研究进展评述[J]. 硅酸盐通报, 2021, 40(6): 1796-1807.
[15]	刘俊力, 任杰, Jonathan Phuong Tran. 3D打印混凝土技术在澳大利亚的最近研究进展[J]. 硅酸盐通报, 2021, 40(6): 1808-1813.