碳纳米管水泥基复合材料的研究进展

摘要/Abstract

摘要： 近年来,碳纳米管(CNTs)在传统胶凝材料中的应用愈来愈受到人们的重视。通过添加适量的CNTs,可以使胶凝材料的一些性能得到有效改善。本文综述了国内外有关CNTs在水泥基材料中的应用研究进展,主要探讨了CNTs对水泥基材料的力学性能、耐久性及微观结构的影响,掺加活性物质对CNTs/水泥基复合材料性能的影响,并且总结了当前研究中所存在的一些问题,为今后的研究前景提出了一些建议。

关键词: 碳纳米管, 水泥基复合材料, 力学性能, 耐久性, 微观结构, 活性掺合物

Abstract: In recent years, more and more attention has been paid to the application of carbon nanotubes (CNTs) in traditional cementitious materials. Some properties of cementitious materials are effectively improved by adding appropriate CNTs. The application of CNTs in cement-based materials was reviewed in this paper. The effects of CNTs on mechanical properties, durability and microstructure of cement-based materials and the addition of active substances on properties of CNTs/cement-based composites were mainly discussed. Some problems existing in the current research were summarized and some suggestions for future research prospects were put forward.

Key words: carbon nanotubes, cement-based composites, mechanical property, durability, microstructure, active admixture

中图分类号:

TU599

张继旭, 王文广, 李金权, 韩杰. 碳纳米管水泥基复合材料的研究进展[J]. 硅酸盐通报, 2021, 40(3): 714-722.

ZHANG Jixu, WANG Wenguang, LI Jinquan, HAN Jie. Research Progress of Carbon Nanotubes Cement-Based Composites[J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2021, 40(3): 714-722.

参考文献

[1] 权开玉.碳纳米管/环氧树脂复合材料性能研究[J].橡塑技术与装备,2019,45(2):36-42.
QUAN K Y. Study on properties of carbon nanotubes/epoxy resin composites[J]. China Rubber/Plastics Technology and Equipment, 2019, 45(2): 36-42 (in Chinese).
[2] 张中太,林元华,唐子龙,等.纳米材料及其技术的应用前景[J].材料工程,2000,28(3):42-48.
ZHANG Z T, LIN Y H, TANG Z L, et al. Nanometer materials & nanotechology and their application prospect[J]. Journal of Materials Engineering, 2000, 28(3): 42-48 (in Chinese).
[3] EKREM M, ŞAHIN Ö S, KARABULUT S E, et al. Thermal stability and adhesive strength of boron nitride nano platelets and carbon nano tube modified adhesives[J]. Journal of Composite Materials, 2018, 52(11): 1557-1565.
[4] 季韬,黄与舟,郑作樵.纳米混凝土物理力学性能研究初探[J].混凝土,2003(3):13-14+48.
JI T, HUANG Y Z, ZHENG Z Q. Primary investigation of physics and mechanics properties of nano-concrete[J]. Concrete, 2003(3): 13-14+48 (in Chinese).
[5] 龚建清,林立.氧化石墨烯/碳纳米管水泥基复合材料的抗冻性研究[J].硅酸盐通报,2018,37(11):3410-3415.
GONG J Q, LIN L. Study on frost resistance of GO/CNTs cementitious composites[J]. Bulletin of the Chinese Ceramic Society, 2018, 37(11): 3410-3415 (in Chinese).
[6] CWIRZEN A, HABERMEHL-CWIRZEN K, PENTTALA V. Surface decoration of carbon nanotubes and mechanical properties of cement/carbon nanotube composites[J]. Advances in Cement Research, 2008, 20(2): 65-73.
[7] PEIGNEY A, LAURENT C, FLAHAUT E, et al. Specific surface area of carbon nanotubes and bundles of carbon nanotubes[J]. Carbon, 2001, 39(4): 507-514.
[8] AHMADI M, RESHADINEZHAD M R. A new high speed 2n-1 modular adder based on carbon nano tube field effect transistors[J]. Journal of Nanoelectronics and Optoelectronics, 2018, 13(4): 602-609.
[9] SANCHEZ F, SOBOLEV K. Nanotechnology in concrete: a review[J]. Construction and Building Materials, 2010, 24(11): 2060-2071.
[10] BALAGURU P, CHONG K. Nanotechnology and concrete: research opportunities[J]. ACI Special Publication, 2008, 254: 15-28.
[11] LIN Z R, XU Y Y, ZHANG T. A theoretical exploration into durability of carbon nanotubes cement-based materials[C]//Electronics, Electrical Engineering and Information Science. Guangzhou: World Scientific, 2016.
[12] BIRICIK H, AKÖZ F, BERKTAY I L, et al. Study of pozzolanic properties of wheat straw ash[J]. Cement and Concrete Research, 1999, 29(5): 637-643.
[13] GHICOV A, SCHMUKI P. Self-ordering electrochemistry: a review on growth and functionality of TiO₂ nanotubes and other self-aligned MO_x structures[J]. Chemical Communications, 2009(20): 2791.
[14] MOKHTAR M M, ABO-EL-ENEIN S A, HASSAAN M Y, et al. Mechanical performance, pore structure and micro-structural characteristics of graphene oxide nano platelets reinforced cement[J]. Construction and Building Materials, 2017, 138: 333-339.
[15] WANG B M, HAN Y, PAN B F, et al. Mechanical and morphological properties of highly dispersed carbon nanotubes reinforced cement based materials[J]. Journal of Wuhan University of Technology-Mater Sci Ed, 2013, 28(1): 82-87.
[16] LI G Y, WANG P M, ZHAO X H. Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes[J]. Carbon, 2005, 43(6): 1239-1245.
[17] SIKORA P, ABD ELRAHMAN M, CHUNG S Y, et al. Mechanical and microstructural properties of cement pastes containing carbon nanotubes and carbon nanotube-silica core-shell structures, exposed to elevated temperature[J]. Cement and Concrete Composites, 2019, 95: 193-204.
[18] LI Z H, WANG H F, HE S, et al. Investigations on the preparation and mechanical properties of the nano-alumina reinforced cement composite[J]. Materials Letters, 2006, 60(3): 356-359.
[19] HAN Z D, FINA A. Thermal conductivity of carbon nanotubes and their polymer nanocomposites: a review[J]. Progress in Polymer Science, 2011, 36(7): 914-944.
[20] IIJIMA S. Helical microtubules of graphitic carbon[J]. Nature, 1991, 354(6348): 56-58.
[21] SÁEZ DE IBARRA Y, GAITERO J J, ERKIZIA E, et al. Atomic force microscopy and nanoindentation of cement pastes with nanotube dispersions[J]. Physica Status Solidi (a), 2006, 203(6): 1076-1081.
[22] SANDLER J, SHAFFER M S P, PRASSE T, et al. Development of a dispersion process for carbon nanotubes in an epoxy matrix and the resulting electrical properties[J]. Polymer, 1999, 40(21): 5967-5971.
[23] GONG X Y, LIU J, BASKARAN S, et al. Surfactant-assisted processing of carbon nanotube/polymer composites[J]. Chemistry of Materials, 2000, 12(4): 1049-1052.
[24] SEEGER T, KÖHLER T, FRAUENHEIM T, et al. Nanotube composites: novel SiO₂ coated carbon nanotubes[J]. Chemical Communications (Cambridge, England), 2002(1): 34-35.
[25] 张树鹏,宋海欧.氧化石墨烯/β-环糊精超分子杂化体的制备及表征[J].无机材料学报,2012,27(6):596-602.
ZHANG S P, SONG H O. Preparation and characterization of graphene oxide/β-cyclodextrin supramolecular hybrid material[J]. Journal of Inorganic Materials, 2012, 27(6): 596-602 (in Chinese).
[26] BENABDELLAH A, BELARBI H, ILIKTI H, et al. Magnetic properties of polyaniline/ZFe₂O₄ nanocomposites synthesized in CTAB as surfactant and ionic liquid[J]. Tenside Surfactants Detergents, 2015, 52(6): 484-492.
[27] XU S L, LIU J T, LI Q H. Mechanical properties and microstructure of multi-walled carbon nanotube-reinforced cement paste[J]. Construction and Building Materials, 2015, 76: 16-23.
[28] XU S L, GAO L L, JIN W J. Production and mechanical properties of aligned multi-walled carbon nanotubes-M140 composites[J]. Science in China Series E: Technological Sciences, 2009, 52(7): 2119-2127.
[29] HAMZAOUI R, BENNABI A, GUESSASMA S, et al. Optimal carbon nanotubes concentration incorporated in mortar and concrete[J]. Advanced Materials Research, 2012, 587: 107-110.
[30] MORSY M S, ALSAYED S H, AQEL M. Hybrid effect of carbon nanotube and nano-clay on physico-mechanical properties of cement mortar[J]. Construction and Building Materials, 2011, 25(1): 145-149.
[31] CHAIPANICH A, NOCHAIYA T, WONGKEO W, et al. Compressive strength and microstructure of carbon nanotubes-fly ash cement composites[J]. Materials Science and Engineering: A, 2010, 527(4/5): 1063-1067.
[32] GILLANI S S U H, KHITAB A, AHMAD S, et al. Improving the mechanical performance of cement composites by carbon nanotubes addition[J]. Procedia Structural Integrity, 2017, 3: 11-17.
[33] MAKAR J M, CHAN G W. Growth of cement hydration products on single-walled carbon nanotubes[J]. Journal of the American Ceramic Society, 2009, 92(6): 1303-1310.
[34] KONSTA-GDOUTOS M S, METAXA Z S, SHAH S P. Highly dispersed carbon nanotube reinforced cement based materials[J]. Cement and Concrete Research, 2010, 40(7): 1052-1059.
[35] METAXA Z S, KONSTA-GDOUTOS M S, SHAH S P. Carbon nanotubes reinforced concrete[J]. ACI Special Publication, 2009, 267: 11-20.
[36] PARVEEN S, RANA S, FANGUEIRO R, et al. Microstructure and mechanical properties of carbon nanotube reinforced cementitious composites developed using a novel dispersion technique[J]. Cement and Concrete Research, 2015, 73: 215-227.
[37] 崔宏志,杨嘉明,林炅增.碳纳米管分散技术及碳纳米管-水泥基复合材料研究进展[J].材料导报,2016,30(3):91-95.
CUI H Z, YANG J M, LIN J Z. Research progress on carbon nanotubes dispersion techniques and CNTs-reinforced cement-based materials[J]. Materials Review, 2016, 30(3): 91-95 (in Chinese).
[38] 范杰,熊光晶,李庚英.碳纳米管水泥基复合材料的研究进展及其发展趋势[J].材料导报,2014,28(11):142-148.
FAN J, XIONG G J, LI G Y. Progress in research and development of carbon nanotubes-reinforced cementbased composite materials[J]. Materials Review, 2014, 28(11): 142-148 (in Chinese).
[39] 王宝民,韩瑜,宋凯.碳纳米管水泥基材料耐久性理论探讨[J].低温建筑技术,2011,33(11):1-3.
WANG B M, HAN Y, SONG K. A theoretical exploration into durability of carbon nanotubes cement-based materials[J]. Low Temperature Architecture Technology, 2011, 33(11): 1-3 (in Chinese).
[40] KONG J, CASSELL A M, DAI H J. Chemical vapor deposition of methane for single-walled carbon nanotubes[J]. Chemical Physics Letters, 1998, 292(4/5/6): 567-574.
[41] WANG B M, HAN Y, LIU S. Effect of highly dispersed carbon nanotubes on the flexural toughness of cement-based composites[J]. Construction and Building Materials, 2013, 46: 8-12.
[42] KANG S T, SEO J Y, PARK S H. The characteristics of CNT/cement composites with acid-treated MWCNTs[J]. Advances in Materials Science and Engineering, 2015, 2015: 1-9.
[43] NOCHAIYA T, CHAIPANICH A. Behavior of multi-walled carbon nanotubes on the porosity and microstructure of cement-based materials[J]. Applied Surface Science, 2011, 257(6): 1941-1945.
[44] LI W W, JI W M, WANG Y C, et al. Investigation on the mechanical properties of a cement-based material containing carbon nanotube under drying and freeze-thaw conditions[J]. Materials (Basel, Switzerland), 2015, 8(12): 8780-8792.
[45] AMIN M S, EL-GAMAL S M A, HASHEM F S. Fire resistance and mechanical properties of carbon nanotubes-clay bricks wastes (Homra) composites cement[J]. Construction and Building Materials, 2015, 98: 237-249.
[46] DEL CARMEN CAMACHO M, GALAO O, BAEZA F J, et al. Mechanical properties and durability of CNT cement composites[J]. Materials (Basel), 2014, 7(3): 1640-1651.
[47] HU Y, LUO D N, LI P H, et al. Fracture toughness enhancement of cement paste with multi-walled carbon nanotubes[J]. Construction and Building Materials, 2014, 70: 332-338.
[48] MATZUI L Y, OVSIENKO I V, LEN T A, et al. Transport properties of composites with carbon nanotube-based composites[J]. Fullerenes, Nanotubes and Carbon Nanostructures, 2005, 13(s1): 259-265.
[49] YAZDANI N, MOHANAM V. Carbon nano-tube and nano-fiber in cement mortar: effect of dosage rate and water-cement ratio[J]. International Journal of Material Sciences, 2014, 4(2): 45.
[50] SINGH A P, GUPTA B K, MISHRA M, et al. Multiwalled carbon nanotube/cement composites with exceptional electromagnetic interference shielding properties[J]. Carbon, 2013, 56: 86-96.
[51] HAN B G, YU X, OU J P. Effect of water content on the piezoresistivity of MWNT/cement composites[J]. Journal of Materials Science, 2010, 45(14): 3714-3719.
[52] LUO J L, DUAN Z D, LI H. The influence of surfactants on the processing of multi-walled carbon nanotubes in reinforced cement matrix composites[J]. Physica Status Solidi (a), 2009, 206(12): 2783-2790.
[53] AZHARI F, BANTHIA N. Cement-based sensors with carbon fibers and carbon nanotubes for piezoresistive sensing[J]. Cement and Concrete Composites, 2012, 34(7): 866-873.
[54] KIM H K, PARK I S, LEE H K. Improved piezoresistive sensitivity and stability of CNT/cement mortar composites with low water-binder ratio[J]. Composite Structures, 2014, 116: 713-719.
[55] D’ALESSANDRO A, UBERTINI F, MATERAZZI A L, et al. Electromechanical modelling of a new class of nanocomposite cement-based sensors for structural health monitoring[J]. Structural Health Monitoring: an International Journal, 2015, 14(2): 137-147.
[56] RAI S, TIWARI S. Nano silica in cement hydration[J]. Materials Today: Proceedings, 2018, 5(3): 9196-9202.
[57] STYNOSKI P, MONDAL P, MARSH C. Effects of silica additives on fracture properties of carbon nanotube and carbon fiber reinforced Portland cement mortar[J]. Cement and Concrete Composites, 2015, 55: 232-240.
[58] KIM H K, NAM I W, LEE H K. Enhanced effect of carbon nanotube on mechanical and electrical properties of cement composites by incorporation of silica fume[J]. Composite Structures, 2014, 107: 60-69.
[59] HUNASHYAL A. Experimental investigation on the effect of multiwalled carbon nanotubes and nano-SiO₂ addition on mechanical properties of hardened cement paste[J]. Advances in Materials, 2014, 3(5): 45.
[60] JAVED H, ISLAM M, MAHMOOD N, et al. Catalytic growth of multi-walled carbon nanotubes using NiFe₂O₄ nanoparticles and incorporation into epoxy matrix for enhanced mechanical properties[J]. Journal of Polymer Engineering, 2016, 36(1): 53-64.
[61] GURUMURTHY G, HALLAD S, HUNASHYAL A M, et al. Effect of multiwalled carbon nanotubes and nano aluminium oxide on flexural and compressive strength of cement composites[J]. International Journal of Advance Research In Science And Engineering, 2014, 3(8): 215-223.