欢迎访问《硅酸盐通报》官方网站,今天是
分享到:

硅酸盐通报 ›› 2021, Vol. 40 ›› Issue (2): 521-526.

所属专题: 资源综合利用

• 资源综合利用 • 上一篇    下一篇

考虑软弱夹层的含孔洞大理岩力学特性模拟分析

罗许林1, 王国柱2, 郝亚勋1   

  1. 1.郑州工业应用技术学院建筑工程学院,郑州 451150;
    2.中国矿业大学,深部岩土力学与地下工程国家重点实验室,徐州 221116
  • 收稿日期:2020-09-22 修回日期:2020-11-10 出版日期:2021-02-15 发布日期:2021-03-10
  • 作者简介:罗许林(1991—),女,讲师。主要从事岩石破裂与失稳方面的研究。E-mail:luoxulin_zuit@163.com
  • 基金资助:
    国家自然科学基金(41974164,41474122);中央高校基本科研业务费项目(2018ZDPY08)

Simulation Analysis of Mechanical Properties of Marble Containing Hole with Weak Intercalation

LUO Xulin1, WANG Guozhu2, HAO Yaxun1   

  1. 1. School of Architectural Engineering, Zhengzhou University of Industrial Technology, Zhengzhou 451150, China;
    2. State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining & Technology, Xuzhou 221116, China
  • Received:2020-09-22 Revised:2020-11-10 Online:2021-02-15 Published:2021-03-10

摘要: 天然岩体中常含有孔洞和软弱夹层等缺陷,为研究含1条软弱夹层与中心孔洞的大理岩在单轴压缩作用下的破坏模式和力学特性,采用数值模拟软件RFPA2D对试样破裂过程进行了模拟。结果表明:软弱夹层的存在改变了大理岩试样的破坏模式,当软弱夹层强度比较低,厚度比较大时,软弱夹层下部的大理岩基本不出现破坏;当软弱夹层强度不变时,大理岩试样的峰值应力随着软弱夹层厚度的增加而减小,峰值应力对应的应变随着软弱夹层厚度的增加而增加;当软弱夹层厚度不变时,大理岩试样的峰值应力随着软弱夹层强度的增加而增加,峰值应力对应的应变随着软弱夹层强度的增加而减小。研究结果对比揭示了不同厚度和强度软弱夹层含孔洞大理岩的破坏模式和力学特性,可为软弱夹层上部建设的岩体工程失稳破坏提供一定的参考。

关键词: 软弱夹层, 孔洞, 大理岩, 力学特性, 数值模拟

Abstract: To study the failure mode and mechanical properties of marble with one weak intercalation and central hole under uniaxial compression, the fracture process of the sample is simulated by the numerical simulation software RFPA2D. The results show that the existence of the weak intercalation changes the failure mode of the marble sample. When the strength of the weak intercalation is lower and the thickness is larger, the marble under the weak intercalation basically does not appear failure. When the strength of the weak intercalation is unchanged, the peak stress of the marble sample decreases with the increase of the thickness of the weak intercalation, and the strain corresponding to the peak stress increases with the increase of the thickness of the weak intercalation. When the thickness of the weak intercalation is constant, the peak stress of marble sample increases with the increase of the strength of the weak intercalation, and the strain corresponding to the peak stress decreases with the increase of the strength of the weak intercalation. The results reveal the failure mode and mechanical characteristics of marble containing holes with different thickness and strength weak intercalation, which provides some reference for the instability failure of the rock mass engineering in the upper part of the weak intercalation.

Key words: weak intercalation, hole, marble, mechanical property, simulation analysis

中图分类号: