欢迎访问《硅酸盐通报》官方网站,今天是

硅酸盐通报 ›› 2016, Vol. 35 ›› Issue (9): 3057-3061.

• • 上一篇    下一篇

反应烧结铁铝尖晶石添加量对镁铁铝尖晶石耐火材料性能影响

李森;封立杰;王前;贾元平;陈孝良;白佳海;徐凤超;刘俊成;杜庆洋   

  1. 山东理工大学材料科学与工程学院,淄博,255049;淄博市鲁中耐火材料有限公司,淄博,255138
  • 出版日期:2016-09-15 发布日期:2021-01-18
  • 基金资助:
    山东省自主创新及成果转化专项(2014ZZCX01404)

Effect of Adding Hercynite Synthesized by Reactive Sintering on the Properties of Magnesia-hercynite Refractory

LI Sen;FENG Li-jie;WANG Qian;JIA Yuan-ping;CHEN Xiao-liang;BAI Jia-hai;XU Feng-chao;LIU Jun-cheng;DU Qing-yang   

  • Online:2016-09-15 Published:2021-01-18

摘要: 以反应烧结铁铝尖晶石和镁砂为原料,研究了添加1%、3%、5%、7%、9%和11%反应烧结铁铝尖晶石对制备镁铁铝尖晶石耐火材料的性能影响。利用XRD分析试样的物相组成,SEM观察试样的微观结构。结果表明:在1%~11%范围内,随着铁铝尖晶石添加量的增加,镁铁铝尖晶石耐火材料的热震稳定性和挂窑皮性能提高,但荷重软化温度降低;铁铝尖晶石加入量为5%时,镁铁铝尖晶石耐火材料有较大的体积密度、较高的常温耐压强度和较小的显气孔率。

关键词: 反应烧结;铁铝尖晶石;镁铁铝尖晶石耐火材料;挂窑皮性;水泥回转窑

Abstract: Magnesia-hercynite refractory was prepared by reaction sintering , using magnesia and hercynite as raw materials.The influences of hercynite addition by 1%, 3%, 5%, 7%, 9% and 11% on the properties of magnesia-hercynite refractory were studied . The phase composition of specimens was determined by XRD and the microstructure was observed by SEM .The results show that the thermal shock resistance and coating adhesion ability of magnesia-hercynite refractory improve and the refractoriness under load decrease with the increasing of the content of hercynite within the range from 1% to 11%.The magnesia-hercynite refractory has bigger bulk density , higher cold crushing strength and smaller apparent porosity when the content of hercynite is 5%.

Key words: reactive sintering;hercynite;magnesia-hercynite refractory;coating adhesion ability;cement rotary kiln

中图分类号: