欢迎访问《硅酸盐通报》官方网站,今天是

硅酸盐通报 ›› 2010, Vol. 29 ›› Issue (1): 180-183.

• • 上一篇    下一篇

溶胶-凝胶燃烧法制备Nd:Y_2O_3激光陶瓷纳米粉体

孙晶;李昌立;于文生;耿爱芳;陆庆;刘景和   

  1. 长春理工大学,长春,130022
  • 出版日期:2010-02-15 发布日期:2021-01-18

Synthesis of Nd:Y_2O_3 Laser Ceramic Nano-powders by Sol-gel Combustion Method

SUN Jing;LI Chang-li;YU Wen-sheng;GENG Ai-fang;LU Qing;LIU Jing-he   

  • Online:2010-02-15 Published:2021-01-18

摘要: 以Y_2O_3 和Nd_2O_3为原料,采用溶胶-凝胶燃烧法制备出Nd:Y_2O_3激光陶瓷纳米粉体.XRD测试结果表明粉体的最佳煅烧温度为1000 ℃,并且晶化完全.原子力显微镜观察结果表明粉体的粒度约为200 nm,分布均匀.差热-热重分析表明,柠檬酸在447 ℃分解放热, 而晶型转变温度为590 ℃,荧光光谱测试表明粉体最强的荧光发射峰位于9421.646 cm~(-1)(即波长1061.4 nm处) ,是 Nd~(3+4)F_(3/2)-~4I_(11/2)谱相导致的荧光发射.

关键词: Nd:Y_2O_3;激光陶瓷;溶胶-凝胶燃烧法

Abstract: The Nd:Y_2O_3 laser ceramic precusor was prepared by sol-gel combustion method, and Y_2O_3 and Nd_2O_3 were used as raw materials.XRD analysis showed that the optimum calcined temperature of precursor was 1000 ℃. At the same time crystallization was completed.The analysis of DTA-TG indicated that the citric acid was decomposed at 447 ℃,and the temperature of crystal inversion was 590 ℃.The strongest fluorescence peak of Nd:Y_2O_3 laser ceramics precursor was 9421.646 cm~(-1), that was Nd~(3+4)F_(3/2)-~4I_(11/2).

Key words: Nd:Y_2O_3;laser ceramic;Sol-gel combustion method

中图分类号: