Welcome to Visit BULLETIN OF THE CHINESE CERAMIC SOCIETY! Today is

BULLETIN OF THE CHINESE CERAMIC SOCIETY ›› 2026, Vol. 45 ›› Issue (2): 562-572.DOI: 10.16552/j.cnki.issn1001-1625.2025.0810

• Solid Waste and Eco-Materials • Previous Articles     Next Articles

Synergistic Carbonation-Hydration Mechanisms and Microstructural Evolution in Low-Heat Cement and Steel Slag Mortars

WEN He1(), ZHANG Xiaoxiang2(), GU Lei2, DENG Jiaxin2   

  1. 1. School of Urban Construction Engineering,Chongqing Technology and Business Institute,Chongqing 400052,China
    2. United Testing Inspection & Certification Technology Co. ,Ltd. ,Changzhou 213015,China
  • Received:2025-08-11 Revised:2025-09-08 Online:2026-02-20 Published:2026-03-09
  • Contact: ZHANG Xiaoxiang

Abstract:

The carbonation of ordinary cementitious material has been extensively studied, whereas the carbonation behavior of low-heat Portland cement combined with steel slag remains insufficiently explored. Steel slag, rich in free CaO and latent hydraulic activity, can promote carbonation reactions when incorporated into low-heat cement systems. In this study, the effects of binder-sand ratio, water-binder ratio, and steel slag dosage on compressive strength, pore structure, and phase evolution under different carbonation durations and curing regimes were investigated. Results show that appropriate pre-curing regulates the residual water-binder ratio, enhances CO2 diffusion, and improves carbonation efficiency. At a binder-sand ratio of 3∶5 with a low water-binder ratio, specimens nearly completely carbonized within 48 h, with calcite as the main carbonation product. The formation of aragonite depending on the carbonation rate. Compressive strength correlates well with carbonation degree, reaching up to 68.8 MPa after 48 h of carbonation. Pore structure analysis indicate that carbonation and subsequent hydration can significantly refine the pore size and improve the density of samples. XRD, TG-DTG, FT-IR, and SEM-EDS reveal that CaCO3 generated by carbonation interacted with hydration products to form a three-dimensional cross-linked structure, markedly enhancing microstructural compactness and mechanical performance.

Key words: low-heat cement, steel slag, carbonation curing, hydration curing, carbonation depth, compressive strength, microstructure

CLC Number: