Welcome to Visit BULLETIN OF THE CHINESE CERAMIC SOCIETY! Today is

BULLETIN OF THE CHINESE CERAMIC SOCIETY ›› 2024, Vol. 43 ›› Issue (9): 3294-3302.

• Solid Waste and Eco-Materials • Previous Articles     Next Articles

Preparation and Performance of Calcium Silicate Board Based on Titanium Tailing Slag

AN Xinyu1, LI Lin2, ZHANG Lan1, JIANG Tao1,3   

  1. 1. School of Metallurgy, Northeastern University, Shenyang 110819, China;
    2. State Key Laboratory for Comprehensive Utilization of Vanadium and Titanium Resources, Pangang Group Research Institute Co., Ltd., Panzhihua 617000, China;
    3. Key Laboratory of Ecological Metallurgy of Multimetallic Ores (Ministry of Education), Shenyang 110819, China)
  • Received:2024-01-16 Revised:2024-03-14 Online:2024-09-15 Published:2024-09-19

Abstract: Titanium tailing slag, a chlorinated waste resulting from titanium extraction processes from high-titanium blast furnace slag, has historically lacked viable technologies for large-scale utilization, posing potential environmental risks. This study leveraged titanium tailing slag as the main ingredient in the development of thermal insulation materials, specifically calcium silicate boards, and evaluated the influences of various parameters such as calcium to silicate ratio, diatomite content, water-to-binder ratio, and mix proportion of raw to dechlorinated slag on the material’s performance metrics, phase composition, and microscopic morphology. Findings indicate that the flexural strength of calcium silicate boards exhibits a pattern of initial increase followed by a decrease as the proportion of dechlorinated slag is raised. Excess diatomite, high calcium to silicon ratio, and elevated water-to-binder ratio adversely affect the enhancement of sample attributes. Optimal material properties are observed when the composition included 46% (mass fraction) titanium tailing slag (with an equal ratio of raw to dechlorinated slag), 15% (mass fraction) silicate cement, 17% (mass fraction) diatomite, a calcium to silicon ratio of 0.84, and a water-to-binder ratio of 0.75. Under these conditions, the calcium silicate board demonstrates superior characteristics: a bulk density of 1.25 g/cm3, a flexural strength of 10.4 MPa, a thermal conductivity of 0.297 W/(m·K), and a sample-contained chloride ion mass fraction of 0.36%, achieving a 56% chloride fixation ratio.

Key words: titanium tailing slag, washed dechlorinated slag, calcium silicate board, flexural strength, thermal conductivity, chloride fixation ratio

CLC Number: