Sand Content and Orientation Time Influence Law of Oriented Steel Fiber Cementitious Composites

Abstract

Abstract: In order to study the steel fiber orientation distribution law of steel fiber cementitious composites, considering the two factors of orientation time and sand content, 32 specimens were made based on the steel fiber orientation equipment independently developed in the team. Under the constant magnetic field, the gradient orientation time and sand content steel fiber orientation tests were carried out systematically, using COMSOL finite element to simulate the magnetic field distribution of orientation tests, and using CT-X-ray scanning technology to obtain the cross-section images of different specimens. The orientation coefficient of steel fiber was calculated, and the orientation law of steel fiber under the influence of gradient orientation time and sand content were discussed. The results show that with the increase of orientation time, the orientation coefficient of steel fiber under the condition of the same sand content increases rapidly at the initial stage, and then slows down gradually and finally tends to be stable. Under the same orientation time, too high or too low sand content will adversely affect the orientation efficiency of steel fiber, and controlling the sand content at about 40% can obtain relatively ideal steel fiber orientation effect.

Key words: cementitious composite, magnetic orientation, sand content, orientation time, orientation coefficient

CLC Number:

TU528.57

CHEN Zhuoyi, KOU Zihao, XIONG Yongming, YI Hongjian, CAO Xianhui. Sand Content and Orientation Time Influence Law of Oriented Steel Fiber Cementitious Composites[J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(7): 2346-2354.

References

[1] AKKAYA Y, SHAH S P, ANKENMAN B. Effect of fiber dispersion on multiple cracking of cement composites[J]. Journal of Engineering Mechanics, 2001, 127(4): 311-316.
[2] AKKAYA Y, PICKA J, SHAH S P. Spatial distribution of aligned short fibers in cement composites[J]. Journal of Materials in Civil Engineering, 2000, 12(3): 272-279.
[3] LI F Y, CAO C Y, CUI Y X, et al. Experimental study of the basic mechanical properties of directionally distributed steel fibre-reinforced concrete[J]. Advances in Materials Science and Engineering, 2018, 2018: 3578182.
[4] XIONG Y M, YANG M, ZHAO J K, et al. Transverse isotropic compression behavior of aligned steel fiber UHPC produced by electromagnetic field[J]. Construction and Building Materials, 2024, 411: 134579.
[5] 苏安双, 黄煌煌, 高小建. 基于流动诱导纤维取向的UHPC制备与性能研究[J]. 中国建材科技, 2020, 29(5): 77-81.
SU A S, HUANG H H, GAO X J. Preparation and performance of UHPC based on flow-induced fiber orientation[J]. China Building Materials Science & Technology, 2020, 29(5): 77-81 (in Chinese).
[6] 沈秀将, 邵旭东, EUGEN B. 基于纤维取向分布的应变硬化超高性能混凝土薄层抗拉性能[J]. 硅酸盐学报, 2021, 49(11): 2384-2392.
SHEN X J, SHAO X D, EUGEN B. Tensile response of strain-hardening ultra-high performance fiber concrete thin layer based on fiber orientation distribution[J]. Journal of the Chinese Ceramic Society, 2021, 49(11): 2384-2392 (in Chinese).
[7] 毕继红, 徐达, 鲍春, 等. 钢纤维混凝土浇筑模拟及纤维分布取向探究[J]. 特种结构, 2015, 32(6): 113-118+66.
BI J H, XU D, BAO C, et al. Numerical simulation of steel fiber reinforced concrete casting & research on fibers distribution and orientation[J]. Special Structures, 2015, 32(6): 113-118+66 (in Chinese).
[8] 陈宁. 定向型钢纤维增强砼受力构件初探[J]. 交通科技, 2000(4): 22-24.
CHEN N. Preliminary study on oriented steel fiber reinforced concrete bearing members[J]. Sci & Tech, Information of Water Transportation, 2000(4): 22-24 (in Chinese).
[9] HUANG H H, GAO X J, LI L S, et al. Improvement effect of steel fiber orientation control on mechanical performance of UHPC[J]. Construction and Building Materials, 2018, 188: 709-721.
[10] 姚琏, 叶连生, 钱辉惋. 乱向短纤维增强混凝土的裂后纤维有效系数[J]. 南京工学院学报, 1983, 13(1): 87-95.
YAO L, YE L S, QIAN H W. Post-cracking efficiency factors for fibres of random short fibres reinforced concrete[J]. Journal of Southeast University (Natural Science Edition), 1983, 13(1): 87-95 (in Chinese).
[11] 田稳苓, 马林翔, 张楷婕, 等. 定向钢纤维水泥基复合材料的纤维分布研究[J]. 建筑科学, 2016, 32(3): 14-18.
TIAN W L, MA L X, ZHANG K J, et al. Investigation of fibre distribution on aligned steel fibre cement-based composite materials[J]. Building Science, 2016, 32(3): 14-18 (in Chinese).
[12] 宋少民, 孙凌. 土木工程材料[M]. 第二版. 武汉: 武汉大学出版社, 2011.
SONG S M, SUN L. Civil engineering materials[M]. 2nd ed. Wuhan: Wuhan University Press, 2011 (in Chinese).
[13] 何锦云, 李瑞璟, 王继宗. 砂率对砼和易性及强度影响的试验研究[J]. 河北建筑科技学院学报, 2002, 19(4): 27-29+43.
HE J Y, LI R J, WANG J Z. The study of the influence of sand percentage on the workability and strength of concrete[J]. Journal of Hebei Institute of Architectural Science and Technology, 2002, 19(4): 27-29+43 (in Chinese).
[14] 黎梦圆, 刘宇, 韩建国, 等. 砂率与浆骨比对大流动性混凝土新拌性能的影响[J]. 硅酸盐学报, 2020, 48(7): 1107-1113.
LI M Y, LIU Y, HAN J G, et al. Influences of sand ratio and paste aggregate ratio on fresh properties of high-fluidity concrete[J]. Journal of the Chinese Ceramic Society, 2020, 48(7): 1107-1113 (in Chinese).
[15] 仇影, 丁蓓, 郑春扬, 等. 砂率对C30～C50混凝土强度及工作性能的影响[J]. 硅酸盐通报, 2016, 35(10): 3486-3491.
QIU Y, DING B, ZHENG C Y, et al. Influence of sand percentage on strength and workability of C30-C50 concrete[J]. Bulletin of the Chinese Ceramic Society, 2016, 35(10): 3486-3491 (in Chinese).
[16] 赵学涛, 杨鼎宜, 朱从香, 等. 砂率对超高性能混凝土的性能研究[J]. 混凝土, 2021(1): 17-19+24.
ZHAO X T, YANG D Y, ZHU C X, et al. Study on sand ratio of ultra high performance concrete[J]. Concrete, 2021(1): 17-19+24 (in Chinese).
[17] 慕儒, 赵全明, 田稳苓. 单向分布钢纤维增强水泥浆的制备与性能研究[J]. 河北工业大学学报, 2012, 41(2): 101-104.
MU R, ZHAO Q M, TIAN W L. Investigation on the preparation and properties of aligned steel fibre reinforce cement paste[J]. Journal of Hebei University of Technology, 2012, 41(2): 101-104 (in Chinese).
[18] 慕儒, 李辉, 王晓伟, 等. 单向分布钢纤维增强水泥基复合材料(II): 制备及钢纤维增强作用[J]. 建筑材料学报, 2015, 18(3): 387-392.
MU R, LI H, WANG X W, et al. Aligned steel fibre reinforced cement based composites(II): preparation and reinforcement of aligned steel fibres[J]. Journal of Building Materials, 2015, 18(3): 387-392 (in Chinese).
[19] 慕儒, 邱欣, 赵全明, 等. 单向分布钢纤维增强水泥基复合材料(I): 钢纤维方向控制[J]. 建筑材料学报, 2015, 18(2): 208-213.
MU R, QIU X, ZHAO Q M, et al. Aligned steel fibre reinforced cement based composites(I): orientation control of steel fibres[J]. Journal of Building Materials, 2015, 18(2): 208-213 (in Chinese).
[20] MU R, LI H, QING L B, et al. Aligning steel fibers in cement mortar using electro-magnetic field[J]. Construction and Building Materials, 2017, 131: 309-316.
[21] 周珺. l»d的圆柱体在黏性液体中的下落的探究[J]. 大学物理实验, 2012, 25(4): 87-89.
ZHOU J. Research the where abouts of l»d cylinder in viscous liquid[J]. Physical Experiment of College, 2012, 25(4): 87-89 (in Chinese).
[22] 汪洋, 徐金霞, 蒋林华, 等. 磁场诱导定向碳纤维增强水泥砂浆的力学性能[J]. 复合材料学报, 2019, 36(11): 2726-2733.
WANG Y, XU J X, JIANG L H, et al. Mechanical properties of cement mortar reinforced with aligned carbon fibers by magnetic field[J]. Acta Materiae Compositae Sinica, 2019, 36(11): 2726-2733 (in Chinese).
[23] DUPONT D, VANDEWALLE L. Distribution of steel fibres in rectangular sections[J]. Cement and Concrete Composites, 2005, 27(3): 391-398.
[24] LEE C, KIM H. Orientation factor and number of fibers at failure plane in ring-type steel fiber reinforced concrete[J]. Cement and Concrete Research, 2010, 40(5): 810-819.