Road Performances and Mechanical Properties of Multi-Gravel Polyurethane Concrete

Abstract

Abstract: To investigate the road performance and mechanical properties of polyurethane mixture with dense skeleton structure, the design theory of multi-gravel asphalt concrete was used to design the composition of polyurethane concrete. A variety of performance tests were carried out to evaluate the road performance of multi-gravel polyurethane concrete, and the mechanical properties were evaluated based on uniaxial penetration test, uniaxial compressive test and uniaxial tensile test. The results show that the dynamic stability of multi-gravel polyurethane concrete is 53.4 times and 17.8 times that of matrix asphalt mixture and asphalt mastic gravel mixture. The maximum bending strain at low temperature is 2.26 times and 1.95 times respectively, and the fatigue life is 26.0 times and 12.7 times, respectively. In terms of mechanical properties, temperature has little effect on the uniaxial penetration strength and penetration amount of multi-gravel polyurethane concrete. The compressive and tensile elastic modulus of multi-gravel polyurethane concrete are much smaller than that of cement concrete, but larger than that of asphalt mastic gravel concrete. Multi-gravel polyurethane concrete has excellent road performance. Temperature has little effect on the shear mechanical properties of multi-gravel polyurethane concrete. The multi-uniaxial tensile and compressive mechanical properties are between asphalt mixture and cement concrete, which can be applied to pavement structure paving.

Key words: pavement engineering, multi-gravel, polyurethane concrete, road performance, mechanical property

CLC Number:

U414

SUN Min, HOU Derui, GENG Litao, YAN Zhuoran, BI Yufeng, HUANG Zhaoliang, REN Shuaiyu, WANG Benyi. Road Performances and Mechanical Properties of Multi-Gravel Polyurethane Concrete[J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(2): 746-756.

References

[1] 孙铭鑫. 聚氨酯空隙弹性路面混合料的性能研究[D]. 南京: 东南大学, 2016.
SUN M X. Study on performance of polyurethane void elastic pavement mixture[D]. Nanjing: Southeast University, 2016 (in Chinese).
[2] 王元元, 刘燕燕, 何顺顺, 等. 聚氨酯碎石和透水砖两种人行铺装结构及性能对比[J]. 中外公路, 2020, 40(5): 42-46.
WANG Y Y, LIU Y Y, HE S S, et al. Comparison of structure and performance of polyurethane macadam and permeable brick for pedestrian pavement[J]. Journal of China & Foreign Highway, 2020, 40(5): 42-46 (in Chinese).
[3] 吕欣芃. 聚氨酯类钢桥面铺装防水粘结层剪切破坏性能研究[D]. 北京: 北京建筑大学, 2022.
LYU X P. Study on shear failure performance of waterproof adhesive layer of polyurethane steel bridge deck pavement[D]. Beijing: Beijing University of Civil Engineering and Architecture, 2022 (in Chinese).
[4] 祁冰. 适用于桥面铺装的聚氨酯(PU)改性沥青及混合料性能研究[D]. 西安: 长安大学, 2018.
QI B. Study on properties of polyurethane (PU) modified asphalt and mixture suitable for bridge deck pavement[D]. Xi'an: Chang'an University, 2018 (in Chinese).
[5] 《中国公路学报》编辑部. 中国路面工程学术研究综述·2020[J]. 中国公路学报, 2020, 33(10): 1-66.
Editorial Department of China Journal of Highway and Transport. Review on China's pavement engineering research·2020[J]. China Journal of Highway and Transport, 2020, 33(10): 1-66 (in Chinese).
[6] WANG D W, SCHACHT A, LENG Z, et al. Effects of material composition on mechanical and acoustic performance of poroelastic road surface (PERS)[J]. Construction and Building Materials, 2017, 135: 352-360.
[7] WANG D W, LIU P F, LENG Z, et al. Suitability of PoroElastic Road Surface (PERS) for urban roads in cold regions: mechanical and functional performance assessment[J]. Journal of Cleaner Production, 2017, 165: 1340-1350.
[8] WANG D, SCHACHT A, CHEN X, et al. Innovative treatment to winter distresses using a prefabricated rollable pavement based on a textile-reinforced concrete[J]. Journal of Performance of Constructed Facilities, 2016, 30(1).
[9] 王火明, 李汝凯, 等. 多孔隙聚氨酯碎石混合料路用性能及工程应用[C]//2015年4月建筑科技与管理学术交流会论文集. 北京, 2015: 6-10.
WANG H M, LI R K, et al. Pavement performance and engineering application of porous polyurethane gravel mixture[C]//Proceedings of the April 2015 Academic Exchange Conference on Building Technology and Management. Beijing, 2015: 6-10 (in Chinese).
[10] 王火明, 李汝凯, 王秀, 等. 多孔隙聚氨酯碎石混合料强度及路用性能[J]. 中国公路学报, 2014, 27(10): 24-31.
WANG H M, LI R K, WANG X, et al. Strength and road performance for porous polyurethane mixture[J]. China Journal of Highway and Transport, 2014, 27(10): 24-31 (in Chinese).
[11] CONG L, WANG T J, TAN L, et al. Laboratory evaluation on performance of porous polyurethane mixtures and OGFC[J]. Construction and Building Materials, 2018, 169: 436-442.
[12] CONG L, YANG F, GUO G H, et al. The use of polyurethane for asphalt pavement engineering applications: a state-of-the-art review[J]. Construction and Building Materials, 2019, 225: 1012-1025.
[13] LU G Y, RENKEN L, LI T S, et al. Experimental study on the polyurethane-bound pervious mixtures in the application of permeable pavements[J]. Construction and Building Materials, 2019, 202: 838-850.
[14] 李添帅, 陆国阳, 王大为, 等. 高性能聚氨酯透水混合料关键性能研究[J]. 中国公路学报, 2019, 32(4): 158-169.
LI T S, LU G Y, WANG D W, et al. Key properties of high-performance polyurethane bounded pervious mixture[J]. China Journal of Highway and Transport, 2019, 32(4): 158-169 (in Chinese).
[15] 徐世法, 张业兴, 郭昱涛, 等. 基于贯入阻力测试系统的聚氨酯混凝土压实时机确定方法[J]. 中国公路学报, 2021, 34(7): 226-235.
XU S F, ZHANG Y X, GUO Y T, et al. Determination of polyurethane concrete compaction timing based on penetration resistance test system[J]. China Journal of Highway and Transport, 2021, 34(7): 226-235 (in Chinese).
[16] BAN H, IM S, KIM Y R. Nonlinear viscoelastic approach to model damage-associated performance behavior of asphaltic mixture and pavement structure[J]. Canadian Journal of Civil Engineering, 2013, 40(4): 313-323.
[17] 封基良, 黄晓明. 沥青粘结料粘弹性参数确定方法的研究[J]. 公路交通科技, 2006, 23(5): 16-18+22.
FENG J L, HUANG X M. Study on the method of determining viscoelastic parameters of asphalt binder[J]. Journal of Highway and Transportation Research and Development, 2006, 23(5): 16-18+22 (in Chinese).
[18] 顾兴宇, 胡栋梁, 梁槚. 沥青混合料蠕变损伤模型研究与损伤演化分析[C]//中国力学大会-2021, 论文集(第一册). 西安线上会议, 2022: 715.
GU X Y, HU D L, LIANG J. Creep damage model research and damage evolution analysis of asphalt mixture[C]//China Mechanics Conference-2021, Papers (Volume I). Xi'an online conference, 2022: 715 (in Chinese).
[19] KAZMI S M S, MUNIR M J, WU Y F, et al. Effect of macro-synthetic fibers on the fracture energy and mechanical behavior of recycled aggregate concrete[J]. Construction and Building Materials, 2018, 189: 857-868.
[20] 沙庆林. 多碎石沥青混凝土SAC系列的设计与施工. 北京: 人民交通出版社, 2005.
SHA Q L. Design and construction of SAC series of multi-gravel asphalt concrete. Beijing: People's Traffic Press, 2005 (in Chinese).
[21] 张倩, 吕荣培, 马昭, 等. 聚氨酯玛蹄脂混合料的设计及性能[J]. 长江科学院院报, 2022, 39(2): 147-152+158.
ZHANG Q, LÜ R P, MA Z, et al. Design and performance of stone matrix polyurethane[J]. Journal of Yangtze River Scientific Research Institute, 2022, 39(2): 147-152+158 (in Chinese).
[22] SUN M, QU G Z, GENG L T, et al. Fatigue properties and damage characteristics of polyurethane mixtures under a stress control mode[J]. Sustainability, 2022, 14(17): 10966.
[23] SUN M, BI Y F, ZHUANG W, et al. Mechanism of polyurethane binder curing reaction and evaluation of polyurethane mixture properties[J]. Coatings, 2021, 11(12): 1454.