Effect of Silicon Carbide Whiskers on Tensile Strength and Fracture Toughness of Cement-Based Composites

Abstract

Abstract: Silicon carbide whiskers (SiCw) has many excellent properties such as high strength, high elastic modulus. SiCw was dispersed by using water reducer as dispersant in order to modify cement-based composites. Through 8-shaped method, ring tests of crack resistance, and three-point bending test with pre-cracks based on the digital image correlation method, the fracture properties of materials were measured. The pore structure was studied by mercury intrusion porosimetry and the microstructure was observed by SEM to analyze its enhancement mechanism on cement-based composites. The results show that the SiCw causes crack deflection during crack propagation. By crack path analysis, the crack path of SiCw modified cement-based composites is more tortuous and consumes more energy while crack propagation than the blank group. The incorporation of SiCw helps to improve the brittleness of cement-based composites and provides new ideas for improving the performance of cement-based composites. The SiCw bridging effect and pull-out mechanism effectively control the crack propagation, thus enhancing the crack resistance and the tensile strength of the cement-based materials. From the perspective of pore structure, there is no obvious filling effect after SiCw incorporation. The addition of SiCw increases the total porosity of cement mortar slightly, which has no adverse effect on tensile strength and fracture thoughness.

Key words: cement-based material, silicon carbide whisker, tensile strength, fracture toughness, microstructure, bridging effect

CLC Number:

TU528

HAN Yanxing, SHAO Sijie, SHI Tao, LAN Yingjia. Effect of Silicon Carbide Whiskers on Tensile Strength and Fracture Toughness of Cement-Based Composites[J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2023, 42(7): 2300-2308.

References

[1] ZHAN M M, PAN G H, ZHOU F F, et al. In situ-grown carbon nanotubes enhanced cement-based materials with multifunctionality[J]. Cement and Concrete Composites, 2020, 108: 103518.
[2] SHI T, LI Z X, GUO J, et al. Research progress on CNTs/CNFs-modified cement-based composites: a review[J]. Construction and Building Materials, 2019, 202: 290-307.
[3] CHANDRASEKARAN R G, RAMAKRISHNA G. Experimental investigation on mechanical properties of economical local natural fibre reinforced cement mortar[J]. Materials Today: Proceedings, 2021, 46: 7633-7638.
[4] YANG L Y, XIE H Z, FANG S Z, et al. Experimental study on mechanical properties and damage mechanism of basalt fiber reinforced concrete under uniaxial compression[J]. Structures, 2021, 31: 330-340.
[5] ZHOU B Y, ZHANG M, WANG L, et al. Experimental study on mechanical property and microstructure of cement mortar reinforced with elaborately recycled GFRP fiber[J]. Cement and Concrete Composites, 2021, 117: 103908.
[6] SAULAT H, CAO M L, KHAN M M, et al. Preparation and applications of calcium carbonate whisker with a special focus on construction materials[J]. Construction and Building Materials, 2020, 236: 117613.
[7] CAO M L, XU L, ZHANG C. Rheology, fiber distribution and mechanical properties of calcium carbonate (CaCO₃) whisker reinforced cement mortar[J]. Composites Part A: Applied Science and Manufacturing, 2016, 90: 662-669.
[8] PAN Q, CHEN T, PAN R, et al. Mechanical properties and microstructure of cementitious materials incorporated with calcium sulfate whiskers and silica fume[J]. Materials Reports, 2019, 33(2): 257-263.
[9] LI M, YE K, LUO K, et al. Research progress on modification and applications in the material fields of calcium sulfate whisker [J]. Bulletin of the Chinese Ceramics Society, 2017, 36(5): 1590-1593.
[10] BECHER P F, HSUEH C H, ANGELINI P, et al. Toughening behavior in whisker-reinforced ceramic matrix composites[J]. Journal of the American Ceramic Society, 1988, 71(12): 1050-1061.
[11] PENG Y, PENG Z J, REN X Y, et al. Effect of SiC nano-whisker addition on TiCN-based cermets prepared by spark plasma sintering[J]. International Journal of Refractory Metals and Hard Materials, 2012, 34: 36-40.
[12] ZHANG X H, XU L, DU S Y, et al. Thermal shock behavior of SiC-whisker-reinforced diboride ultrahigh-temperature ceramics[J]. Scripta Materialia, 2008, 59(1): 55-58.
[13] SILVESTRONI L, SCITI D, MELANDRI C, et al. Toughened ZrB₂-based ceramics through SiC whisker or SiC chopped fiber additions[J]. Journal of the European Ceramic Society, 2010, 30(11): 2155-2164.
[14] ZHANG X N, GENG L, WANG G S. Fabrication of Al-based hybrid composites reinforced with SiC whiskers and SiC nanoparticles by squeeze casting[J]. Journal of Materials Processing Technology, 2006, 176(1/2/3): 146-151.
[15] 刘玲, 殷宁, 亢茂青, 等. 晶须增韧复合材料机理的研究[J]. 材料科学与工程, 2000(2): 116-119+115.
LIU L, YIN N, KANG M Q, et al. Research on whisker toughening mechanism for coposites[J]. Materials Science and Engineering, 2000(2): 116-119+115 (in Chinese).
[16] 聂立芳, 张玉军, 魏红康. 碳化硅晶须增韧陶瓷基复合材料的研究进展[J]. 山东陶瓷, 2006, 29(2): 16-19.
NIE L F, ZHANG Y J, WEI H K. Recent researches and developments of SiC whisker-reinforced ceramic-matrix composites[J]. Shandong Ceramics, 2006, 29(2): 16-19 (in Chinese).
[17] 熊昆, 徐光亮, 李松涛, 等. 碳化硅晶须的分散稳定性[J]. 硅酸盐学报, 2008, 36(10): 1432-1436.
XIONG K, XU G L, LI S T, et al. Dispersion stability of silicon carbide whisker[J]. Journal of the Chinese Ceramic Society, 2008, 36(10): 1432-1436 (in Chinese).
[18] LV X Y, YE F, CHENG L F, et al. Fabrication of SiC whisker-reinforced SiC ceramic matrix composites based on 3D printing and chemical vapor infiltration technology[J]. Journal of the European Ceramic Society, 2019, 39(11): 3380-3386.
[19] 欧阳翔. 预拌砂浆粘结强度和抗压强度现场检测技术研究[D]. 广州: 华南理工大学, 2012.
OUYANG X. Study on field detection technology of bond strength and compressive strength of ready-mixed mortar[D]. Guangzhou: South China University of Technology, 2012 (in Chinese).
[20] ASTM International. Standard test method for tensile strength of chemical-resistant mortar grouts, and monolithic surfacings: ASTM C307-18[S]. West Conshohocken: ASTM International, 2018.
[21] 孟博旭, 许金余, 刘俊良, 等. 含水量对两种配合比水泥砂浆抗拉性能影响的对比试验研究[J]. 硅酸盐通报, 2019, 38(1): 132-137.
MENG B X, XU J Y, LIU J L, et al. Comparative experimental on effect of water content on tensile properties of cement mortar with two compounding ratios[J]. Bulletin of the Chinese Ceramic Society, 2019, 38(1): 132-137 (in Chinese).
[22] 刘丽芳, 王培铭, 杨晓杰. 聚丙烯纤维参数对水泥砂浆抗干缩开裂性的影响[J]. 建筑材料学报, 2005, 8(3): 239-243.
LIU L F, WANG P M, YANG X J. Effects of characteristics of polypropylene fiber on anti-dry-shrinkage cracking property of cement mortar[J]. Journal of Building Materials, 2005, 8(3): 239-243 (in Chinese).
[23] 董伟, 罗昊, 王福禄, 等. 限制收缩椭圆环约束度理论研究与试验设计[J]. 建筑材料学报, 2017, 20(2): 271-276+282.
DONG W, LUO H, WANG F L, et al. Theoretical research on the degree of restraint and experimental design in the restrained shrinkage elliptical ring test[J]. Journal of Building Materials, 2017, 20(2): 271-276+282 (in Chinese).
[24] 张朝阳, 孔祥明, 卢子臣. 用数字图像相关法研究聚合物改性砂浆的力学性能[J]. 硅酸盐学报, 2018, 46(2): 187-192.
ZHANG C Y, KONG X M, LU Z C. Application of digital image correlation method in mechanical properties test of polymer modified mortar[J]. Journal of the Chinese Ceramic Society, 2018, 46(2): 187-192 (in Chinese).
[25] BAIETTI G, QUARTARONE G, CARABBA L, et al. Use of digital image analysis to determine fracture properties of alkali-activated mortars[J]. Engineering Fracture Mechanics, 2020, 240: 107313.
[26] 谢子令, 周华飞, 杨克家, 等. 基于DIC方法的地聚合物混凝土断裂过程分析[J]. 建筑材料学报, 2015, 18(6): 982-987.
XIE Z L, ZHOU H F, YANG K J, et al. Investigation of fracture process in geopolymer concrete with digital image correlation method[J]. Journal of Building Materials, 2015, 18(6): 982-987 (in Chinese).
[27] YAO J W, YANG Y Z, CHEN J K. A novel chemo-mechanical model for fracture toughness of mortar under sulfate attack[J]. Theoretical and Applied Fracture Mechanics, 2020, 109: 102762.
[28] KUMAR S L, ARAVIND H B, HOSSINEY N. Digital image correlation (DIC) for measuring strain in brick masonry specimen using Ncorr open source 2D MATLAB program[J]. Results in Engineering, 2019, 4: 100061.
[29] REN X Y, PENG Z J, PENG Y, et al. Effect of SiC nano-whisker addition on WC-Ni based cemented carbides fabricated by hot-press sintering[J]. International Journal of Refractory Metals and Hard Materials, 2013, 36: 294-299.
[30] 胡少伟, 张润, 范冰, 等. 基于DIC法的混凝土三点弯曲梁断裂性能试验研究[J]. 人民长江, 2019, 50(10): 197-202+228.
HU S W, ZHANG R, FAN B, et al. Experimental study on fracture property of three-point bending concrete beam based on DIC method[J]. Yangtze River, 2019, 50(10): 197-202+228 (in Chinese).
[31] 吴中伟. 混凝土科学技术近期发展方向的探讨[J]. 硅酸盐学报, 1979(3): 262-270.
WU Z W. Discussion on the recent development direction of concrete science and technology[J]. Journal of the Chinese Ceramic Society, 1979(3): 262-270 (in Chinese).