Welcome to Visit BULLETIN OF THE CHINESE CERAMIC SOCIETY! Today is

BULLETIN OF THE CHINESE CERAMIC SOCIETY ›› 2023, Vol. 42 ›› Issue (4): 1506-1512.

• Ceramics, Glass and Refractory Materials • Previous Articles     Next Articles

Preparation and Properties of CaO-Y2O3 Composites

LI Zhonghua1, YAN Zhengguo1, YANG Wengang2, ZHENG Qi3, YU Jingkun1, YUAN Lei1   

  1. 1. School of Metallurgy, Northeastern University, Shenyang 110819, China;
    2. Sinosteel Luoyang Refractory Research Institute Co., Ltd., Luoyang 471039, China;
    3. Zhongmin Chiyuan Industrial Co., Ltd., Yingkou 115100, China
  • Received:2022-11-17 Revised:2022-12-12 Online:2023-04-15 Published:2023-04-25

Abstract: Using yttrium nitrate hexahydrate and calcium carbonate as yttrium and calcium sources, and urea as fuel, the Y2O3 coating CaO powder were prepared by low temperature self-spreading combustion synthesis (LCS) method. The CaO-Y2O3 composites were prepared by calcination, pressing, drying and sintering. The effects of the molar ratio of calcium to yttrium on the structure and properties of composites were investigated. The results show that the prepared Y2O3 coating CaO powder has good coating property. When the molar ratio of calcium to yttrium is 2∶1, the physical properties of the material are the best, the relative density is 96.56%, the apparent porosity is 1.32%, the compressive strength at room temperature is 270.0 MPa, the residual strength retention rate of the sample after 5 thermal shock cycles is 88.39%, and the hydration weight gain rate of the sample after 21 d in the atmospheric environment is 0.75%.

Key words: CaO, Y2O3, refractory material, LCS method, hydration resistance, density

CLC Number: