Welcome to Visit BULLETIN OF THE CHINESE CERAMIC SOCIETY! Today is

BULLETIN OF THE CHINESE CERAMIC SOCIETY ›› 2023, Vol. 42 ›› Issue (4): 1393-1399.

Special Issue: 资源综合利用

• Solid Waste and Eco-Materials • Previous Articles     Next Articles

Preparation and Properties of Autoclaved Aerated Concrete with Red Mud-Gypsum Composite Excitation

HUANG Lixiang1, LIU Ze1, YUAN Hang1, WANG Dongmin1, WEI Peng2, JIANG Hongjian2   

  1. 1. School of Chemical and Environmental Engineering, China University of Mining and Technology (Beijing), Beijing 100083, China;
    2. Shanghai Baiaoheng New Materials Co., Ltd., Shanghai 200042, China
  • Received:2022-12-06 Revised:2023-01-12 Online:2023-04-15 Published:2023-04-25

Abstract: The autoclaved aerated concrete is prepared by using red mud-gypsum to excite blast furnace slag (BFS) and fly ash, which is of great significance to promote the resource utilization of red mud, reduce the consumption of Portland cement, and achieve CO2 reduction. The autoclaved aerated concrete with strength grade A3.5 and density grade B06 was taken as the design goal, and the influences of red mud, gypsum, BFS, and quicklime on the compressive strength of autoclaved aerated concrete were analyzed. The results show that when the mass ratio of fly ash, red mud, gypsum, BFS and quicklime is 60∶10∶3∶7∶20, the dry density and compressive strength of autoclaved aerated concrete are 623.4 kg/m3 and 3.6 MPa, respectively. The analysis of hydration products shows that the hydration product before autoclave reaction is mainly ettringite, and the hydration products after autoclaved reaction are tobermorite and katoite.

Key words: autoclaved aerated concrete, red mud, CO2 reduction, compressive strength, dry density, hydration product

CLC Number: