Welcome to Visit BULLETIN OF THE CHINESE CERAMIC SOCIETY! Today is

BULLETIN OF THE CHINESE CERAMIC SOCIETY ›› 2023, Vol. 42 ›› Issue (2): 618-625.

Special Issue: 资源综合利用

• Solid Waste and Eco-Materials • Previous Articles     Next Articles

Preparation and Properties of High Strength Ceramsite from Secondary Aluminum Ash

CHEN Xin, ZENG Xianghui, FANG Wei, HE Xuan, DU Xing, WANG Daheng, LI Weixin, ZHAO Lei, CHEN Hui   

  1. The State Key laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, Wuhan 430081, China
  • Received:2022-10-04 Revised:2022-11-10 Online:2023-02-15 Published:2023-03-07

Abstract: As the waste residue generated in the process of aluminum recycling, the secondary aluminum ash has obvious chemical reactivity, leaching toxicity of toxic and harmful substances and other dangerous characteristics. In order to solve the problem of stockpiling and disposal of secondary aluminum ash generated in aluminum industry, the secondary aluminum ash was used as raw material to prepare high strength ceramsite through water washing, disk granulation and 1 200~1 400 ℃ heat treatment. The phase composition and micromorphologies of the ceramsite samples sintered at different temperatures were analyzed by X-ray diffractometer and scanning electron microscopy. The bulk density, apparent density, porosity and cylinder compressive strength of the ceramsite were tested. The results show that with the increase of heat treatment temperature, the internal structure of ceramsite becomes denser gradually, and the bulk density, apparent density and cylinder compressive strength increase. The main phases of ceramsite after heat treatment at 1 400 ℃ arecorundum and magnesia alumina spinel. The apparent density, volume density and cylinder compressive strength of ceramsite are 1.82 g/cm3, 1.81 g/cm3 and 25.7 MPa, respectively, meeting the requirements of high strength ceramsite.

Key words: secondary aluminum ash, high strength ceramsite, heat treatment temperature, microstructure, cylinder compressive strength

CLC Number: