Research Progress on Preparation and Capture Performance of CaO-Based CO2 Capture Materials from Solid Wastes

Abstract

Abstract: CO₂ capture technology is an important way to deal with global climate change and mitigate the greenhouse effect. The preparation of efficient CaO-based CO₂ capture materials from calcium-containing solid wastes is conducive to the realization of high-value utilization of solid wastes, waste treatment and clean production, which has important environmental benefits, economic benefits, and social benefits. Based on the good application prospects of efficient and cheap CaO-based CO₂ capture materials from solid wastes, the production and resource utilization of industrial waste residues, biomass and other calcium-containing solid wastes were introduced in this paper. The capture principle, carbonation kinetic process and CO₂ capture performance of CaO-based adsorbents were summarized. The adsorption-desorption cycle performance of CaO-based adsorbents prepared with different calcium-containing solid wastes as precursors and the influences of different modification methods on the adsorption stability of CaO-based adsorbents were compared. The potential applications of CaO-based adsorbents from solid waste in steel plants, coal-fired power plants and bio-hydrogen production were analyzed from an economic point of view. The application prospect and development direction of CaO-based CO₂ capture materials from solid wastes were prospected. The purpose of this paper is to provide help for the selection of CaO-based adsorbent precursor from solid wastes, the improvement of adsorption performance and the industrial application of solid waste adsorbents.

Key words: CaO-based adsorbent, CO₂ capture, capture principle, industrial solid waste, biomass solid waste, resource utilization

CLC Number:

ZHAO Keping, LI Xiaoyu, LI Ruihong, LI Haoran, YANG Tianzuo, YOU Jiajin, PENG Kang. Research Progress on Preparation and Capture Performance of CaO-Based CO₂ Capture Materials from Solid Wastes[J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2023, 42(2): 520-530.

References

[1] YAN Y L, BORHANI T N, SUBRAVETI S G, et al. Harnessing the power of machine learning for carbon capture, utilisation, and storage (CCUS): a state-of-the-art review[J]. Energy & Environmental Science, 2021, 14(12): 6122-6157.
[2] 周绪忠, 李水娥, 仵恒, 等. 化学法吸收燃煤烟气中CO₂的研究[J]. 有色金属(冶炼部分), 2015(10): 75-78.
ZHOU X Z, LI S E, WU H, et al. Study on CO₂ absorption from coal-fired flue gas by chemical method[J]. Nonferrous Metals (Extractive Metallurgy), 2015(10): 75-78 (in Chinese).
[3] 李清方, 陆诗建, 张建, 等. 搅拌法对TEA溶液吸收和解吸CO₂的实验研究[J]. 陕西科技大学学报(自然科学版), 2009, 27(4): 48-51.
LI Q F, LU S J, ZHANG J, et al. Experiment research of TEA solutions absorb and desorb the carbon dioxide based on mixing round method[J]. Journal of Shaanxi University of Science & Technology (Natural Science Edition), 2009, 27(4): 48-51 (in Chinese).
[4] 范文琦, 潘登, 黄亮, 等. 工业固废和廉价矿石制备高循环稳定性高温CO₂捕集材料的研究进展[J]. 材料导报, 2021, 35(17): 17090-17102.
FAN W Q, PAN D, HUANG L, et al. Research progress in the preparation of high cycling stability and high temperature CO₂capture materials from industrial solid waste and cheap ore[J]. Materials Reports, 2021, 35(17): 17090-17102 (in Chinese).
[5] 江涛, 魏小娟, 王胜平, 等. 固体吸附剂捕集CO₂的研究进展[J]. 洁净煤技术, 2022, 28(1): 42-57.
JIANG T, WEI X J, WANG S P, et al. Research progress on solid sorbents for CO₂ capture[J]. Clean Coal Technology, 2022, 28(1): 42-57 (in Chinese).
[6] HU Y C, QU M Y, LI H L, et al. Porous extruded-spheronized Li₄SiO₄ pellets for cyclic CO₂ capture[J]. Fuel, 2019, 236: 1043-1049.
[7] HAAF M, HILZ J, PETERS J, et al. Operation of a 1 MW_th calcium looping pilot plant firing waste-derived fuels in the calciner[J]. Powder Technology, 2020, 372: 267-274.
[8] MA X T, LI Y J, ZHANG C X, et al. Development of Mn/Mg-copromoted carbide slag for efficient CO₂ capture under realistic calcium looping conditions[J]. Process Safety and Environmental Protection, 2020, 141: 380-389.
[9] GONG X Z, ZHANG T, ZHANG J Q, et al. Recycling and utilization of calcium carbide slag-current status and new opportunities[J]. Renewable and Sustainable Energy Reviews, 2022, 159: 112133.
[10] TONG X L, LIU W Q, YANG Y D, et al. A semi-industrial preparation procedure of CaO-based pellets with high CO₂ uptake performance[J]. Fuel Processing Technology, 2019, 193: 149-158.
[11] ZHAO H T, ZHANG M. Research progress of CaO-based absorbents prepared from different calcium sources[J]. IOP Conference Series: Earth and Environmental Science, 2020, 474: 052058.
[12] 晁阳, 林志伟, 孙吉, 等. 钙基吸附剂循环捕获CO₂反应动力学研究[J]. 能源研究与管理, 2018(1): 19-23.
CHAO Y, LIN Z W, SUN J, et al. Study on the cyclic kinetics of CO₂ capture by calcium based adsorbents[J]. Energy Research and Management, 2018(1): 19-23 (in Chinese).
[13] 陈健, 段伦博, 卞若愚, 等. 钙基中空微球的碳酸化性能及其动力学分析[J]. 东南大学学报(自然科学版), 2019, 49(4): 757-763.
CHEN J, DUAN L B, BIAN R Y, et al. Analysis of carbonation and kinetic performance of CaO hollow microspheres[J]. Journal of Southeast University (Natural Science Edition), 2019, 49(4): 757-763 (in Chinese).
[14] WANG N N, FENG Y C, GUO X. Atomistic mechanisms study of the carbonation reaction of CaO for high-temperature CO₂ capture[J]. Applied Surface Science, 2020, 532: 147425.
[15] 闫博威. H₂O对钙基吸收剂循环捕集CO₂性能影响的研究进展[J]. 辽宁化工, 2021, 50(8): 1162-1165.
YAN B W. Effect of H₂O on performance of calcium oxide-based sorbents for cyclic CO₂ capture[J]. Liaoning Chemical Industry, 2021, 50(8): 1162-1165 (in Chinese).
[16] SUN J, GUO Y F, YANG Y D, et al. Mode investigation of CO₂ sorption enhancement for titanium dioxide-decorated CaO-based pellets[J]. Fuel, 2019, 256: 116009.
[17] LEE C H, CHOI S W, YOON H J, et al. Na₂CO₃-doped CaO-based high-temperature CO₂ sorbent and its sorption kinetics[J]. Chemical Engineering Journal, 2018, 352: 103-109.
[18] YANG J, MA L P, LIU H P, et al. Thermodynamics and kinetics analysis of Ca-looping for CO₂ capture: application of carbide slag[J]. Fuel, 2019, 242: 1-11.
[19] LIU K, ZHAO B S, WU Y, et al. Bubbling synthesis and high-temperature CO₂ adsorption performance of CaO-based adsorbents from carbide slag[J]. Fuel, 2020, 269: 117481.
[20] ZHANG W, LI Y J, HE Z R, et al. CO₂ capture by carbide slag calcined under high-concentration steam and energy requirement in calcium looping conditions[J]. Applied Energy, 2017, 206: 869-878.
[21] HE Z R, LI Y J, ZHANG W, et al. Effect of re-carbonation on CO₂ capture by carbide slag and energy consumption in the calciner[J]. Energy Conversion and Management, 2017, 148: 1468-1477.
[22] HU Y P, WU S M, LI Y J, et al. H₂S removal performance of Ca₃Al₂O₆-stabilized carbide slag from CO₂ capture cycles using calcium looping[J]. Fuel Processing Technology, 2021, 218: 106845.
[23] SUN J, SUN Y, YANG Y D, et al. Plastic/rubber waste-templated carbide slag pellets for regenerable CO₂ capture at elevated temperature[J]. Applied Energy, 2019, 242: 919-930.
[24] MA X T, LI Y J, DUAN L B, et al. CO₂ capture performance of calcium-based synthetic sorbent with hollow core-shell structure under calcium looping conditions[J]. Applied Energy, 2018, 225: 402-412.
[25] TIAN S C, JIANG J G, YAN F, et al. Highly efficient CO₂ capture with simultaneous iron and CaO recycling for the iron and steel industry[J]. Green Chemistry, 2016, 18(14): 4022-4031.
[26] TIAN S C, JIANG J G, YAN F, et al. Synthesis of highly efficient CaO-based, self-stabilizing CO₂ sorbents via structure-reforming of steel slag[J]. Environmental Science & Technology, 2015, 49(12): 7464-7472.
[27] SUN R Y, XIAO R, YE J M. Kinetic analysis about the CO₂ capture capacity of lime mud from paper mill in calcium looping process[J]. Energy Science & Engineering, 2020, 8(11): 4014-4024.
[28] ZHANG Y Q, HE L, MA A H, et al. CaO-based sorbent derived from lime mud and bauxite tailings for cyclic CO₂ capture[J]. Environmental Science and Pollution Research, 2018, 25(28): 28015-28024.
[29] MA A H, JIA Q M, SU H Y, et al. Study of CO₂ cyclic absorption stability of CaO-based sorbents derived from lime mud purified by sucrose method[J]. Environmental Science and Pollution Research, 2016, 23(3): 2530-2536.
[30] 张亚朋, 崔龙鹏, 刘艳芳, 等. 3种典型工业固废的CO₂矿化封存性能[J]. 环境工程学报, 2021, 15(7): 2344-2355.
ZHANG Y P, CUI L P, LIU Y F, et al. Comparison of three typical industrial solid wastes on the performance of CO₂ mineralization and sequestration[J]. Chinese Journal of Environmental Engineering, 2021, 15(7): 2344-2355 (in Chinese).
[31] YASIPOURTEHRANI S, TIAN S C, STREZOV V, et al. Development of robust CaO-based sorbents from blast furnace slag for calcium looping CO₂ capture[J]. Chemical Engineering Journal, 2020, 387: 124140.
[32] SALAUDEEN S A, TASNIM S H, HEIDARI M, et al. Eggshell as a potential CO₂ sorbent in the calcium looping gasification of biomass[J]. Waste Management, 2018, 80: 274-284.
[33] NAWAR A, ALI M, KHOJA A H, et al. Enhanced CO₂ capture using organic acid structure modified waste eggshell derived CaO sorbent[J]. Journal of Environmental Chemical Engineering, 2021, 9(1): 104871.
[34] HSIEH S L, LI F Y, LIN P Y, et al. CaO recovered from eggshell waste as a potential adsorbent for greenhouse gas CO₂[J]. Journal of Environmental Management, 2021, 297: 113430.
[35] HE S C, HU Y C, HU T D, et al. Investigation of CaO-based sorbents derived from eggshells and red mud for CO₂ capture[J]. Journal of Alloys and Compounds, 2017, 701: 828-833.
[36] MOHAMED M, YUSUP S, QUITAIN A T, et al. Utilization of rice husk to enhance calcium oxide-based sorbent prepared from waste cockle shells for cyclic CO₂ capture in high-temperature condition[J]. Environmental Science and Pollution Research, 2019, 26(33): 33882-33896.
[37] NAWAR A, GHAEDI H, ALI M, et al. Recycling waste-derived marble powder for CO₂ capture[J]. Process Safety and Environmental Protection, 2019, 132: 214-225.
[38] CAI J J, WANG S Z, XIAO Z Z. A study on the CO₂ capture and attrition performance of construction and demolition waste[J]. Fuel, 2018, 222: 232-242.
[39] MOHAMED M, YUSUP S, BUSTAM M A, et al. Effect of coal bottom ash and binder addition into Cao-based sorbent on CO₂ capture performance[J]. Chemical Engineering Transactions, 2017, 56: 325-330.
[40] YAN F, JIANG J G, LI K M, et al. Cyclic performance of waste-derived SiO₂ stabilized, CaO-based sorbents for fast CO₂ capture[J]. ACS Sustainable Chemistry & Engineering, 2016, 4(12): 7004-7012.
[41] CHI C Y, LI Y J, MA X T, et al. CO₂ capture performance of CaO modified with by-product of biodiesel at calcium looping conditions[J]. Chemical Engineering Journal, 2017, 326: 378-388.
[42] SU C L, DUAN L B, DONAT F, et al. From waste to high value utilization of spent bleaching clay in synthesizing high-performance calcium-based sorbent for CO₂ capture[J]. Applied Energy, 2018, 210: 117-126.
[43] ZHANG C Y, YU B Y, CHEN J M, et al. Green transition pathways for cement industry in China[J]. Resources, Conservation and Recycling, 2021, 166: 105355.
[44] ORTIZ C, VALVERDE J M, CHACARTEGUI R. Energy consumption for CO₂ capture by means of the calcium looping process: a comparative analysis using limestone, dolomite, and steel slag[J]. Energy Technology, 2016, 4(10): 1317-1327.
[45] BRUNETTI A, SCURA F, BARBIERI G, et al. Membrane technologies for CO₂ separation[J]. Journal of Membrane Science, 2010, 359(1/2): 115-125.
[46] ZHANG T Y, CHU G R, LYU J L, et al. CO₂ mineralization of carbide slag for the production of light calcium carbonates[J]. Chinese Journal of Chemical Engineering, 2022, 43: 86-98.
[47] ZHANG C X, LI Y J, YANG L G, et al. Analysis on H₂ production process integrated CaO/Ca(OH)₂ heat storage and sorption enhanced staged gasification using calcium looping[J]. Energy Conversion and Management, 2022, 253: 115169.
[48] 谌缘, 杨海平, 邹俊, 等. 钙基废弃物对生物质吸附增强式气化制氢特性的影响研究[J]. 燃料化学学报, 2022, 51: 1-6.
CHEN Y, YANG H P, ZOU J, et al. Study of calcium-based waste on adsorption enhanced biomass gasification for hydrogen production[J]. Journal of Fuel Chemistry and Technology, 2022, 51: 1-6 (in Chinese).

Research Progress on Preparation and Capture Performance of CaO-Based CO₂ Capture Materials from Solid Wastes

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	WANG Fuping, ZHANG Mo, ZHOU Boyu. Effect of Recycled Wind Turbine Blade Fiber on Mechanical Properties and Frost Resistance of Concrete [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2023, 42(1): 231-238.
[2]	WU Yonglin, ZHANG Wei, DIAN Bo, CHEN Jianjun. Research Status of Phosphogypsum Pyrolysis [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2022, 41(9): 3129-3137.
[3]	WEI Jie, LIU Zhanwei, YAN Hengwei, YANG Wanzhang, LI Mengnan, LIU Shuxin. Research and Application Progress on Aluminum Dross Recycling and Harmless Treatment [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2022, 41(7): 2308-2320.
[4]	LU Mingyang, PANG Laixue, YANG Da, SONG Di, ZHANG Jiali, TIAN Xiaofeng, ZHANG Yiyang. Preparation and Thermodynamic Analysis of Steel Slag-Coal Based Solid Waste Controllable Low-Strength Materials [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2022, 41(7): 2344-2351.
[5]	WANG Tao, LI Wang, ZHU Xiaobo, YAN Xudong. Experiment and Mechanism Analysis of Dealkalization of Red Mud by Calcium-Based Hydrothermal Leaching [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2022, 41(7): 2368-2375.
[6]	AN Hongfang, FU Rusong, LU Yuexian, KONG Dewen, LUO Shuang, WANG Lin, LYU Fangtao. Effect of Heat Treatment Time on Splitting Tensile Properties of Phosphogypsum-Based Composite Cementitious Material [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2022, 41(2): 545-552.
[7]	ZHU Siyu, LI Li, LIU Ze, ZHANG Tong, HAN Fenglan, MA Zhenfei, LIU Jiayu. Hydrothermal Synthesis and Characterization of Zeolite NaA Based on Combination of Silico-Manganese Slag and Fly Ash [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2022, 41(2): 634-639.
[8]	WU Jianfeng, WU Changhu, XU Xiaohong, TIAN Kezhong, LIU Yang, MA Sitong. Preparation of Ceramic Facing Brick from Gold Tailings [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2022, 41(2): 640-648.
[9]	FANG Lu, HUANG Xiao. Utilization of Alkali-Activated Lead-Zinc Smelting Slag for Chromite Ore Processing Residue Solidification [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2021, 40(8): 2631-2639.
[10]	YAO Suqin, ZHA Wenhua, LIU Xinquan, JI Shengxing, HE Changchun, YU Yue. Physicochemical and Thermal Activation Properties of Waste Coal Gangue in Pingxiang Mining Area [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2021, 40(7): 2280-2287.
[11]	ZHANG Xiang, LI Zhiqiao, MA Guojun, WANG Qiang, LIU Mengke. Research Progress of Spinel-Type Cobalt-Free Black Ceramic Pigments [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2021, 40(4): 1318-1329.
[12]	GAO Peng, XU Yueqing, CAO Yun, HAN Yan, LIU Rong. Preparation and Performance Influencing Factors of Silt-Based Non-Sintered Ceramsite [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2021, 40(3): 889-899.
[13]	TAO Hangyu, CHEN Ping, GONG Yifan, ZHAN Jingfang, ZHANG Li. Classification of Recycled Brick and Concrete Coarse Aggregate Based on Brick Content [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2021, 40(3): 957-963.
[14]	YANG Xiaowei, ZHANG Aisheng, QU Junrong, YANG Ke, XU Jianhua, ZHU Ying. Preparation and Properties Optimization of High StrengthCeramsite Obtained from Oily Sludge [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2021, 40(1): 215-222.
[15]	CAO Yong-dan;LI Yan-xin;ZHANG Jin-shan;CAO Zhao. Effect of Raw Material Ratio of Silicon-Calcium Based Solid Wastes and Autoclaved Curing Conditions on Mechanical Property of Calcium Silicate Board [J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2018, 37(1): 122-128.