Welcome to Visit BULLETIN OF THE CHINESE CERAMIC SOCIETY! Today is

BULLETIN OF THE CHINESE CERAMIC SOCIETY ›› 2022, Vol. 41 ›› Issue (8): 2851-2859.

• Solid Waste and EcoMaterials • Previous Articles     Next Articles

Effect of Regenerated Micropowder on Properties of Dry Mixed Mortar

GAO Min1,2, GUO Qilong1,2, DU Lei1,2, HUA Liang1,2, LIU Ronghao1,2, WANG Chunya1,2, MA Zhitong1,2   

  1. 1. College of Civil Engineering, Northwest University for Nationalities, Lanzhou 730124, China;
    2. Gansu Key Laboratory of New Building Materials and Building Energy Conservation, Lanzhou 730124, China
  • Received:2022-03-01 Revised:2022-05-13 Online:2022-08-15 Published:2022-08-30

Abstract: In order to promote the recycling and utilization of construction waste, the dry mixed mortar was prepared by replacing part of cement with regenerated micropowder, and the effects of the fineness, content and compounding ratio of the regenerated micropowder on the consistency, compressive strength, flexural strength and microstructure of the mortar were explored. The results show that the consistency of mortar decreases with the decrease ofregenerated micropowder particle fineness, the compressive strength and flexural strength of mortar at 28 d increase, and the strength reaches the maximum value after grinding for 40 h. With the increase of the content of regenerated micropowder, the consistency of mortar shows a downward trend, and the compressive strength and flexural strength of mortar at 28 d show a trend of increase first and then decrease. When the content of regenerated micropowder is 10% (mass fraction), the compressive strength reaches the maximum value. With the increase of the compounding ratio (mass ratio) of regenerated micropowder, the consistency of mortar shows a downward trend, and the compressive strength and flexural strength of mortar show a trend of increase first and then decrease. When the compounding ratio of micropowder milled for 20 h to unmilled micropowder is 6∶4, its compressive strength reaches the maximum value.

Key words: regenerated micropowder, dry mixed mortar, fineness, content, compounding ratio, mechanical property

CLC Number: