Influence of Phase Change Medium Composition on Heat Storage Performance of Fly Ash-Based High-Temperature Shaped Composite Phase Change Materials

Abstract

Abstract: Using Al powder, Al-12Si and Al-20Si alloy powder as phase change medium and fly ash as matrix material,metal/ceramic based high-temperature shaped composite phase change materials were prepared by mixed sintering method under air and vacuum sintering atmosphere. The effects of the Al-Si relative content and sintering atmosphere on the heat storage performances of materials were investigated. The results show that the oxidation of Al is inevitable when the three kinds of metal powders are used to prepare composite phase change materials, the relative content of Si exceeds the eutectic point composition. The state point during solidification is always in the two-phase zone of eutectic phase and Si phase, and the unoxidized Al transforms into Al-Si eutectic phase. Sintering in air is beneficial for Al to form a dense oxide film and prevent its further reaction. The density and latent heat of phase change of materials sintered in air are higher than those sintered in vacuum. Among the three kinds of composite phase change materials, Al powder composite phase change material has the worst thermal stability, while Al-12Si composite phase change material has the highest latent heat of phase change and retention rate, and outstanding thermal stability and heat storage performance.

Key words: Al powder, Al-Si alloy powder, phase change medium, fly ash, metal/ceramic based composite phase change material, heat storage performance

CLC Number:

LIU Hanchang, ZHU Guihua, LYU Shuo, ZHAO Yu, ZHANG Pan, CHEN Feng. Influence of Phase Change Medium Composition on Heat Storage Performance of Fly Ash-Based High-Temperature Shaped Composite Phase Change Materials[J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2022, 41(2): 597-606.

References

[1] 李少博,坚增运,许军锋,等.Al-Si合金的成分和其凝固收缩率与摩尔体积的关系[J].铸造,2015,64(7):609-614.
LI S B, JIAN Z Y, XU J F, et al. The relationship of chemical compositions, solidification shrinkage and molar volume of Al-Si alloys[J]. Foundry, 2015, 64(7): 609-614 (in Chinese).
[2] 陈举飞,崔学敏,彭小燕,等.铝硅高温相变储热材料显微组织与储热性能研究[J].湖南有色金属,2013,29(2):51-54.
CHEN J F, CUI X M, PENG X Y, et al. Research on the microstructure and property of aluminum-silicon high-temperature phase transformation thermal storage materials[J]. Hunan Nonferrous Metals, 2013, 29(2): 51-54 (in Chinese).
[3] 解立川,彭超群,王日初,等.高硅铝合金电子封装材料研究进展[J].中国有色金属学报,2012,22(9):2578-2587.
XIE L C, PENG C Q, WANG R C, et al. Research progress of high aluminum-silicon alloys in electronic packaging[J]. The Chinese Journal of Nonferrous Metals, 2012, 22(9): 2578-2587 (in Chinese).
[4] 张仁元,孙建强,柯秀芳,等.Al-Si合金的储热性能[J].材料研究学报,2006,20(2):156-160.
ZHANG R Y, SUN J Q, KE X F, et al. Heat storage properties of Al-Si alloy[J]. Chinese Journal of Materials Research, 2006, 20(2): 156-160 (in Chinese).
[5] WANG Z Y, WANG H, LI X B, et al. Aluminum and silicon based phase change materials for high capacity thermal energy storage[J]. Applied Thermal Engineering, 2015, 89: 204-208.
[6] 孙玉成,郑洪亮,吴淑霞,等.铝硅合金潜热变化规律的DSC分析[J].山东大学学报(工学版),2011,41(5):132-137.
SUN Y C, ZHENG H L, WU S X, et al. DSC analysis for latent heat of the aluminum-silicon alloy[J]. Journal of Shandong University (Engineering Science), 2011, 41(5): 132-137 (in Chinese).
[7] 杜宇雷,原光,欧园园,等.雾化气体压强对2A14铝合金粉末形貌和粒度分布的影响[J].徐州工程学院学报(自然科学版),2015,30(1):9-13.
DU Y L, YUAN G, OU Y Y, et al. Effects of atomizing gas pressure on morphology and size distribution of 2A14 aluminum alloy powders[J]. Journal of Xuzhou Institute of Technology (Natural Sciences Edition), 2015, 30(1): 9-13 (in Chinese).
[8] 华建社,王建宏,陈海波,等.粉煤灰制备高温复合相变蓄热材料的可行性研究[J].热加工工艺,2013,42(12):96-98+101.
HUA J S, WANG J H, CHEN H B, et al. Availability of preparation process of high temperature fly ash based phase change composite[J]. Hot Working Technology, 2013, 42(12): 96-98+101 (in Chinese).
[9] 朱桂花,吕硕,韩金鹏,等.球形粉煤灰基高温定形复合相变蓄热材料的制备与性能[J].煤炭转化,2018,41(2):73-79.
ZHU G H, LYU S, HAN J P, et al. Preparation and properties of spherical fly ash based form-stable composite phase change material for high temperature thermal storage[J]. Coal Conversion, 2018, 41(2): 73-79 (in Chinese).
[10] 韩金鹏,朱桂花,吕硕,等.相变介质粒径对粉煤灰基高温定形复合相变材料蓄热性能的影响[J].煤炭转化,2019,42(1):78-86.
HAN J P, ZHU G H, LYU S, et al. Effects of particle size of phase change medium on thermal storage performance of fly ash-based high temperature formstable composite phase change material[J]. Coal Conversion, 2019, 42(1): 78-86 (in Chinese).
[11] 关江哲,朱桂花,吕硕,等.氧化钙对金属/粉煤灰基高温定形复合相变材料蓄热性能的影响[J].硅酸盐通报,2020,39(9):3008-3013+3022.
GUAN J Z, ZHU G H, LYU S, et al. Effect of calcium oxide on thermal storage performance of metal/fly ash-based high temperature form-stable composite phase change material[J]. Bulletin of the Chinese Ceramic Society, 2020, 39(9): 3008-3013+3022 (in Chinese).
[12] 王建宏.粉煤灰基高温复合相变蓄热材料的制备与性能研究[D].西安:西安建筑科技大学,2013:29-30.
WANG J H. Study on preparation and properties of high temperature fly ash base phase change heat storage composite materials[D]. Xi’an: Xi’an University of Architecture and Technology, 2013: 29-30 (in Chinese).
[13] 李稳.粉煤灰陶瓷复合材料的制备工艺研究[D].郑州:郑州大学,2014:15.
LI W. Study on the preparation of ceramics from fly ash[D]. Zhengzhou: Zhengzhou University, 2014: 15 (in Chinese).
[14] 魏朋义,傅恒志.熔体温度对快凝Al-Si过共晶合金条带微观组织及性能的影响[J].金属学报,1996,32(8):817-822.
WEI P Y, FU H Z. Effects of melt temperatures on microstructure and mechanical properties of rapidly solidified Al-(14%-18%)Si ribbons[J]. Acta Metallrugica Sinica, 1996, 32(8): 817-822 (in Chinese).
[15] 张适阔.铝合金高温储热材料相变储热机理研究[D].武汉:武汉理工大学,2009:11.
ZHANG S K. Study on the mechanism of latent heat storage in high-temperature phase change aluminum alloy[D]. Wuhan: Wuhan University of Technology, 2009: 11 (in Chinese).
[16] 长崎诚三,平林真.二元合金状态图集[M].刘安生,译.北京:冶金工业出版社,2004:36.
CHANG Q C S, PING L Z. Atlas of binary alloy state[M].LIU A S, translate. Beijing: Metallurgical Industry Press, 2004: 36 (in Chinese).
[17] 胡加瑞,谢国胜,谢亿,等.相变储能铝合金的组织及储热性能研究[J].矿冶工程,2013,33(3):110-112+116.
HU J R, XIE G S, XIE Y, et al. Research on microstructure and thermal storage properties of phase change energy storage Al alloys[J]. Mining and Metallurgical Engineering, 2013, 33(3): 110-112+116 (in Chinese).
[18] 邬小萍,聂俊辉.快速凝固高硅铝合金加热过程中的组织转变[J].金属热处理,2020,45(5):45-50.
WU X P, NIE J H. Microstructure transformation of rapidly solidified high-silicon aluminum alloy during heating process[J]. Heat Treatment of Metals, 2020, 45(5): 45-50 (in Chinese).
[19] 张静,涂伟萍,夏正斌.聚乙烯醇改性研究进展[J].合成纤维工业,2005,28(1):57-60.
ZHANG J, TU W P, XIA Z B. Research progress in polyvinyl alcohol modification[J]. China Synthetic Fiber Industry, 2005, 28(1): 57-60 (in Chinese).
[20] 张林,边秀房,马家骥.铝硅合金的液相结构转变[J].铸造,1995,44(10):7-12
ZHANG L, BIAN X F, MA J J. Microstructural transformation of Al-Si alloy in the liquid state[J]. Foundry, 1995, 44(10): 7-12 (in Chinese).