Welcome to Visit BULLETIN OF THE CHINESE CERAMIC SOCIETY! Today is

BULLETIN OF THE CHINESE CERAMIC SOCIETY ›› 2021, Vol. 40 ›› Issue (1): 194-200.

Special Issue: 资源综合利用

• Solid Waste and Eco-materials • Previous Articles     Next Articles

Steam-Assisted Synthesis of Magadiite from Illite Silica Residue andIts Adsorption of Cu2+

GUAN Dongdong1, LI Xinyu1, CHEN Shuang1, SU Chongyang1, YANG Siqi2, JIANG Nanzhe1,2   

  1. 1. Department of Chemistry,College of Science,Yanbian University,Yanji 133000,China;
    2. Department of Polymer Materials and Engineering,College of Engineering,Yanbian University,Yanji 133000,China
  • Received:2020-08-07 Revised:2020-09-09 Online:2021-01-15 Published:2021-02-07

Abstract: The pure phase magadiite with high yield and high crystallinity was synthesized using illite silica residue by steam-assisted conversion (SAC).X-ray diffractometer (XRD) and scanning electron microscopy (SEM) were used to investigate the influences of Na2O/SiO2 molar ratio,crystallization temperature (T) and crystallization time (t) on the structure and morphology of synthesized samples.The results show that the preliminary optimization of synthesis conditions of this system are n(Na2O)/n(SiO2)=0.15,T=170 ℃,t=16 h,and the sample morphology is rosette-like (about 12 μm).The Cu2+ adsorption test of magadiite synthesized was carried out,and the effects of adsorbent dosage,pH value,adsorption time and Cu2+ initial concentration on the adsorption effect were studied.The results show that when the adsorbent dosage is 2 g/L,the pH value is 5,and the adsorption time is 30 min,the maximum adsorption capacity of magadiite for Cu2+ is 25.99 mg/g.

Key words: illite silica residue, steam-assisted conversion, magadiite, Cu2+, adsorption property

CLC Number: