欢迎访问《硅酸盐通报》官方网站,今天是
分享到:

硅酸盐通报 ›› 2024, Vol. 43 ›› Issue (12): 4578-4587.

• 玻璃 • 上一篇    下一篇

化学强化工艺对3~6 mm厚锂铝硅玻璃的抗冲击性能影响

高强1,2, 刘振英1, 彭小波1,2, 石丽芬2, 周刚2, 周俊2, 陈仕威2   

  1. 1.安徽理工大学材料科学与工程学院, 淮南 232001;
    2.中建材玻璃新材料研究院集团有限公司, 浮法玻璃新技术国家重点实验室, 蚌埠 233000
  • 收稿日期:2024-07-07 修订日期:2024-08-12 出版日期:2024-12-15 发布日期:2024-12-19
  • 作者简介:高 强(1990—),男,工程师。主要从事强化玻璃的研究。E-mail:645402820@qq.com
  • 基金资助:
    中国建材集团关键核心技术攻关“揭榜挂帅”课题(JT_CORE-202111-000014)

Effect of Chemical Reinforcement Process on Impact Resistance of 3~6 mm Thick Lithium Aluminosilicate Glass

GAO Qiang1,2, LIU Zhenying1, PENG Xiaobo1,2, SHI Lifen2, ZHOU Gang2, ZHOU Jun2, CHEN Shiwei2   

  1. 1. School of Materials Science and Engineering, Anhui University of Science and Technology, Huainan 232001, China;
    2. State Key Laboratory of Advanced Technology for Float Glass, CNBM Research Institute for Advanced Glass Materials Group Co.,Ltd., Bengbu 233000, China
  • Received:2024-07-07 Revised:2024-08-12 Published:2024-12-15 Online:2024-12-19

摘要: 新一代锂铝硅玻璃逐渐成为航空透明件的主流结构材料,由于具有较高的弹性模量和优异的离子交换能力,锂铝硅玻璃经过化学强化处理后具有优异的力学性能,能够很好地满足航空透明件轻质、高强的需求。本文旨在探讨化学强化工艺对3~6 mm厚锂铝硅玻璃抗冲击性能的影响。采用不同强化条件制备样品,通过落球冲击测试及理论计算,分析应力分布对抗冲击性能的作用。研究发现,对于厚锂铝硅玻璃,随着应力层深度的增加,中心应力增长较慢,且厚度越大的锂铝硅玻璃,中心应力增长速度越慢,抗冲击性能随应力层深度增加而提升,这与在薄锂铝硅玻璃中的规律不同。

关键词: 锂铝硅玻璃, 化学强化, 抗冲击性能, 应力层深度, 离子交换, 中心应力

Abstract: The new generation of lithium aluminosilicate glass has gradually become the mainstream structural material for aerospace transparencies. Due to its high elastic modulus and excellent ion exchange capability, lithium aluminosilicate glass exhibits superior mechanical properties after chemical reinforcement treatment, well meeting the requirements of lightweight and high strength for aerospace transparencies. This paper aims to explore the effect of chemical reinforcement processes on impact resistance of 3~6 mm thick lithium aluminosilicate glass. Samples were prepared under different reinforcement conditions, and the effect of stress distribution on impact resistance was analyzed through ball-drop impact testing and theoretical calculations. It is found that for thick lithium aluminosilicate glass, as the depth of the stress layer increases, the growth of central stress is slower. Moreover, thicker lithium aluminosilicate glass exhibits a slower growth rate of central stress, and its impact resistance improves with the increase in the depth of the stress layer, which differs from the pattern observed in thin lithium aluminosilicate glass.

Key words: lithium aluminosilicate glass, chemical reinforcement, impact resistance, stress layer depth, ion exchange, central stress

中图分类号: