FactSage热力学计算在耐火材料抗渣侵蚀性中的应用

硅酸盐通报 ›› 2024, Vol. 43 ›› Issue (3): 1110-1122.

所属专题：耐火材料

FactSage热力学计算在耐火材料抗渣侵蚀性中的应用

郭伟杰^1,2, 朱天彬^1,2, 李亚伟^1,2, 廖宁^1,2, 桑绍柏^1,2, 徐义彪^1,2, 鄢文^1,2

1.武汉科技大学省部共建耐火材料与冶金国家重点实验室,武汉 430081;
2.武汉科技大学高温材料与炉衬技术国家地方联合工程研究中心,武汉 430081

收稿日期:2023-09-27 修订日期:2023-12-06 出版日期:2024-03-15 发布日期:2024-03-27
通信作者: 朱天彬,博士,副教授。E-mail:zhutianbin@wust.edu.cn
作者简介:郭伟杰(1998—),男,硕士研究生。主要从事耐火材料抗渣性能的研究。E-mail:1099255596@qq.com
基金资助:
国家自然科学基金联合基金重点项目(U21A2058,U1908227,52272071);湖北省自然科学基金项目(2022CFB024)

Application of FactSage Thermodynamic Calculation on Slag Corrosion Resistance of Refractories

GUO Weijie^1,2, ZHU Tianbin^1,2, LI Yawei^1,2, LIAO Ning^1,2, SANG Shaobai^1,2, XU Yibiao^1,2, YAN Wen^1,2

1. The State Key Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, Wuhan 430081, China;
2. National-Provincial Joint Engineering Research Center of High Temperature Materials and Lining Technology, Wuhan University of Science and Technology, Wuhan 430081, China

Received:2023-09-27 Revised:2023-12-06 Online:2024-03-15 Published:2024-03-27

摘要/Abstract

摘要： 商用热力学计算软件FactSage在耐火材料抗渣侵蚀性研究中起到重要作用,因此在耐火材料研究中应用越来越广泛。本文总结了近15年来热力学计算在耐火材料抗渣侵蚀性研究中的应用,重点介绍了耐火材料抗渣侵蚀研究中常用的热力学计算模型,分析了各种模型的原理、特点、适用情景、精确度与局限性,并给出了详细的运用实例。此外,本文介绍了热力学计算与其他方法相结合运用的实例,包含ANSYS、动力学分析、分子动力学模拟等方法,规避热力学计算的局限性,更加全面地分析熔渣对耐火材料的侵蚀行为。最后,本文对热力学计算存在的问题进行了归纳,并基于现有研究现状对其发展前景与方向进行了展望。

关键词: 耐火材料, 热力学计算, 抗渣侵蚀性, FactSage, 热力学模型

Abstract: Commercial thermodynamic calculation software FactSage plays an important role in the analysis of slag corrosion process,therefore it has been widely used in the research of refractories. Application of thermodynamic calculation on slag corrosion resistance of refractories and thermodynamic calculation models which are commonly used in the slag corrosion resistance of refractories were introduced. The mechanisms, characteristics, applicable situations, accuracy and limitations of every model were discussed, and the detailed examples were given. Furthermore, the application examples of FactSage combined with other methods including ANSYS, kinetic analysis and MD simulation were given, aiming to avoid the limitations of thermodynamic calculation and comprehensively analyze the slag corrosion behavior. Lastly, the common problems of thermodynamic calculation were summarized, and the direction of further development was proposed.

Key words: refractory, thermodynamic calculation, slag corrosion resistance, FactSage, thermodynamic model

中图分类号:

TQ175

郭伟杰, 朱天彬, 李亚伟, 廖宁, 桑绍柏, 徐义彪, 鄢文. FactSage热力学计算在耐火材料抗渣侵蚀性中的应用[J]. 硅酸盐通报, 2024, 43(3): 1110-1122.

GUO Weijie, ZHU Tianbin, LI Yawei, LIAO Ning, SANG Shaobai, XU Yibiao, YAN Wen. Application of FactSage Thermodynamic Calculation on Slag Corrosion Resistance of Refractories[J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2024, 43(3): 1110-1122.

参考文献

[1] 孙宁, 李俊翰, 杨绍利, 等. 铁合金冶炼副产物微硅粉的性能及用途[J]. 河南化工, 2017, 34(4): 7-10.
SUN N, LI J H, YANG S L, et al. Properties and application of silica fume from the ferroalloy smelting by-product[J]. Henan Chemical Industry, 2017, 34(4): 7-10 (in Chinese).
[2] 王杰. 工业硅生产过程中副产物微硅粉的形成机理及其提纯工艺的研究[D]. 昆明: 昆明理工大学, 2020.
WANG J. Study on the formation mechanism of microsilica powder as a by-product of industrial silicon production and its purification process[D]. Kunming:Kunming University of Science and Technology, 2020 (in Chinese).
[3] 王杰, 魏奎先, 马文会, 等. 工业微硅粉应用及提纯研究进展[J]. 材料导报, 2020, 34(23): 23081-23087.
WANG J, WEI K X, MA W H, et al. Research progress in purification and application of industrial silica fume[J]. Materials Reports, 2020, 34(23): 23081-23087 (in Chinese).
[4] 林雨楠, 李犇, 余盈, 等. 湿法研磨激发制备硅灰水泥净浆的力学性能研究[J]. 材料研究与应用, 2023, 17(1): 149-157.
LIN Y N, LI B, YU Y, et al. Study on mechanical properties of silica fume cement paste prepared by wet grinding excitation[J]. Materials Research and Application, 2023, 17(1): 149-157 (in Chinese).
[5] 孙宁, 李俊翰, 杨绍利, 等. 工业微硅粉的提纯与应用技术研究进展[J]. 无机盐工业, 2017, 49(8): 5-9.
SUN N, LI J H, YANG S L, et al. Research progress in purification and application technology of industrial silica fume[J]. Inorganic Chemicals Industry, 2017, 49(8): 5-9 (in Chinese).
[6] KHAN M I, LYNSDALE C J, WALDRON P. Porosity and strength of PFA/SF/OPC ternary blended paste[J]. Cement and Concrete Research, 2000, 30(8): 1225-1229.
[7] JEONG S G, JEON J, CHA J, et al. Preparation and evaluation of thermal enhanced silica fume by incorporating organic PCM, for application to concrete[J]. Energy and Buildings, 2013, 62: 190-195.
[8] 李青翠, 黄以军. 微硅粉低成本制备莫来石基陶瓷材料[J]. 硅酸盐通报, 2019, 38(7): 2072-2075+2086.
LI Q C, HUANG Y J. Preparation of low cost mullite ceramics from silica fume[J]. Bulletin of the Chinese Ceramic Society, 2019, 38(7): 2072-2075+2086 (in Chinese).
[9] 阎赞, 李峰, 孙武, 等. 钼尾矿微晶玻璃的制备及性能研究[J]. 非金属矿, 2020, 43(6): 43-45.
YAN Z, LI F, SUN W, et al. Research on preparation and performances of glass ceramics with molybdenum tailings[J]. Non-Metallic Mines, 2020, 43(6): 43-45 (in Chinese).
[10] RAWLINGS R D, WU J P, BOCCACCINI A R. Glass-ceramics: their production from wastes: a review[J]. Journal of Materials Science, 2006, 41(3): 733-761.
[11] 裴凤娟. 利用工业固废制备微晶玻璃过程中镁、铁和氟的影响[D]. 北京: 北京科技大学, 2021.
PEI F J. Effects of magnesium, iron and fluorine on the preparation of glass-ceramics from industrial solid waste[D].Beijing: University of Science and Technology Beijing, 2021 (in Chinese).
[12] 罗云龙. 花岗岩尾矿建筑微晶玻璃的制备及性能研究[D]. 绵阳: 西南科技大学, 2022.
LUO Y L. Study on preparation and properties of building glass-ceramics from granite tailings[D]. Mianyang: Southwest University of Science and Technology, 2022 (in Chinese).
[13] WANG Y C, LIU P J, LUO G P, et al. Optimization of heat treatment of glass-ceramics made from blast furnace slag[J]. High Temperature Materials and Processes, 2020, 39(1): 539-544.
[14] 陈维铅, 高淑雅, 董亚琼, 等. 烧结法制备金矿尾砂CaO-Al₂O₃-SiO₂微晶玻璃及其性能研究[J]. 硅酸盐学报, 2014, 42(1): 95-100.
CHEN W Q, GAO S Y, DONG Y Q, et al. Preparation and properties of CaO-Al₂O₃-SiO₂ glass-ceramics from gold tailings by sintering[J]. Journal of the Chinese Ceramic Society, 2014, 42(1): 95-100 (in Chinese).
[15] 张伟, 杨淑敏, 周向玲, 等. 直接烧结法制备高炉渣微晶玻璃的研究[J]. 新疆大学学报(自然科学版), 2010, 27(2): 209-213.
ZHANG W, YANG S M, ZHOU X L, et al. Prepration of direct sintered glass-ceramics from blast furnce slag[J]. Journal of Xinjiang University (Natural Science Edition), 2010, 27(2): 209-213 (in Chinese).
[16] 彭长浩, 卢金山. 利用废玻璃和粉煤灰制备钙铝硅微晶玻璃及其性能[J]. 材料热处理学报, 2012, 33(10): 32-36.
PENG C H, LU J S. Preparation and properties of calcium aluminosilicate glass-ceramics from waste glass and fly ash[J]. Transactions of Materials and Heat Treatment, 2012, 33(10): 32-36 (in Chinese).
[17] 徐颖, 张勇. 测量玻璃化转变温度的几种热分析技术[J]. 分析仪器, 2010(3): 57-60.
XU Y, ZHANG Y. Thermal analysis techniques for measurement of glass transition temperature[J]. Analytical Instrumentation, 2010(3): 57-60 (in Chinese).
[18] PENG F, LIANG K M, HU A M. Nano-crystal glass-ceramics obtained from high alumina coal fly ash[J]. Fuel, 2005, 84(4): 341-346.
[19] 曹超, 彭同江, 丁文金. 晶化温度对CaO-Al₂O₃-SiO₂-Fe₂O₃系粉煤灰微晶玻璃析晶及性能的影响[J]. 硅酸盐学报, 2013, 41(1): 122-128.
CAO C, PENG T J, DING W J. Effect of crystallization temperature on crystallization and properties of CaO-Al₂O₃-SiO₂-Fe₂O₃ glass ceramics from coal fly ash[J]. Journal of the Chinese Ceramic Society, 2013, 41(1): 122-128 (in Chinese).
[20] 李解, 李保卫, 朱静, 等. 白云鄂博尾矿微波还原除铁制备CAS系微晶玻璃工艺研究[J]. 硅酸盐通报, 2013, 32(11): 2200-2205.
LI J, LI B W, ZHU J, et al. Preparation process of CAS glass-ceramics from Bayan obo tailings after iron-removing by microwave reduction[J]. Bulletin of the Chinese Ceramic Society, 2013, 32(11): 2200-2205 (in Chinese).

FactSage热力学计算在耐火材料抗渣侵蚀性中的应用

Application of FactSage Thermodynamic Calculation on Slag Corrosion Resistance of Refractories

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	颉付博, 李亚伟, 廖宁, 史成龙, 蔡国庆, 秦建涛. 模拟氢基竖炉工况条件下铝硅质耐火材料的结构与性能演变[J]. 硅酸盐通报, 2024, 43(3): 1133-1142.
[2]	邓丽娜, 易帅, 王明刚, 李伟豪, 司国栋, 姜文博, 王长安, 谢金莉. 两种氧化铝粉对熔铸AZS耐火材料结构和性能的影响[J]. 硅酸盐通报, 2023, 42(8): 2952-2959.
[3]	李忠华, 颜正国, 杨文刚, 郑岐, 于景坤, 袁磊. CaO-Y₂O₃复合材料的制备及性能研究[J]. 硅酸盐通报, 2023, 42(4): 1506-1512.
[4]	王含, 沈瑞麟, 王鸿妹, 汪庆卫. 晶相组成对硅质耐火材料抗碱侵蚀性能的影响[J]. 硅酸盐通报, 2023, 42(3): 1130-1136.
[5]	杨鹏鹏, 魏国平, 黄奥, 李昇昊, 顾华志. 基于数字图像相关法的铝镁质耐火材料抗侵蚀性能研究[J]. 硅酸盐通报, 2023, 42(2): 761-768.
[6]	王宁宁, 李寒旭, 夏宝亮, 李懂, 陈建杨. 恒温时间对煤灰熔体熔融行为的影响研究[J]. 硅酸盐通报, 2023, 42(10): 3652-3659.
[7]	彭蕾, 余俊, 赵惠忠, 张德强, 韩娟, 蔡霜. 多孔球形莫来石基浇注料的制备及性能研究[J]. 硅酸盐通报, 2023, 42(1): 319-328.
[8]	司国栋, 易帅, 邓丽娜, 许谦, 陈美娜, 王长安, 潘传才, 林国伟, 周吉, 魏霞, 薛飞, 谢金莉. 熔铸耐火材料抗盖板玻璃熔体侵蚀行为研究[J]. 硅酸盐通报, 2023, 42(1): 345-351.
[9]	卢明阳, 庞来学, 杨达, 宋迪, 张佳丽, 田晓峰, 张逸洋. 钢渣-煤基固废可控低强度材料制备及热力学分析[J]. 硅酸盐通报, 2022, 41(7): 2344-2351.
[10]	王艺慈, 王一帆, 王瑞鑫, 赵凤光, 柴轶凡, 罗果萍. Cr₂O₃含量对玻璃熔体黏度和熔化特性的影响[J]. 硅酸盐通报, 2022, 41(7): 2518-2523.
[11]	陈洋, 邓承继, 娄晓明, 丁军, 余超. 低碳MgO-C耐火材料结构和性能优化的研究进展[J]. 硅酸盐通报, 2022, 41(6): 2153-2159.
[12]	毛利民, 李庆元, 杨海云, 曾海军, 刘继旺, 卿晓斌, 王智勇, 朱伟, 杨智超. 含Y₂O₃熔铸41^#AZS材料抗玻璃液侵蚀性能研究[J]. 硅酸盐通报, 2022, 41(4): 1195-1201.
[13]	王玉龙, 王周福, 王玺堂, 刘浩, 马妍, 姜鹏程. 知识图谱视角下耐火材料的研究发展[J]. 硅酸盐通报, 2022, 41(12): 4444-4457.
[14]	祁欣, 罗旭东, 李振, 周远鹏, 潘振中. 高硅菱镁矿的选矿提纯与应用研究进展[J]. 硅酸盐通报, 2021, 40(2): 485-492.
[15]	许志强, 左海滨, 刘林程. 铝碳质耐火材料研究进展及展望[J]. 硅酸盐通报, 2021, 40(2): 664-675.