玄武岩纤维混凝土板冲切试验与承载力分析

摘要/Abstract

摘要： 为探究玄武岩纤维对混凝土板抗冲切性能的增强效果,基于我国现行规范对此类构件冲切承载力计算方法提出修正建议。以纤维体积掺量(0%、0.1%、0.2%、0.3%)与纤维长度(12 mm、18 mm)为变量,对7个混凝土板试件进行冲切试验,研究各参数对试件极限承载力的影响,建立经试验验证的有限元模型并进行扩参数分析。结果表明:玄武岩纤维混凝土板的极限承载力随体积掺量的增加呈先增大后减小的趋势,掺入长度为12 mm、18 mm的玄武岩纤维的试件较对比试件冲切承载力提升显著,最大提高幅度分别为40.9%和37.3%;纤维长度为12 mm,体积掺量为0.4%时,对混凝土板的抗冲切性能改善效果最佳。我国《混凝土结构设计规范》(GB 50010—2010)的冲切承载力计算值较试验结果偏于保守,考虑玄武岩纤维阻裂作用对临界截面周长的影响,对规范中的冲切承载力计算公式进行修正。

关键词: 玄武岩纤维混凝土板, 静力冲切试验, 承载力计算, 纤维长度, 纤维体积掺量, 有限元分析

Abstract: In order to explore the enhancement effect of basalt fiber on the punching shear resistance of concrete slab, and propose amendments to the calculation method for the punching shear bearing capacity of such components, based on the current norms in China. The volume content of fiber (0%, 0.1%, 0.2%, 0.3%) and the fiber length (12 mm, 18 mm) were taken as variables. The effect of each variables on the ultimate bearing capacity of seven concrete slab specimens was studied by punching shear test. Moreover, a finite element analysis model verified by the test was established for expansion parameter analysis. The results show that with the increase of volume content, the ultimate bearing capacity of basalt fiber concrete slab increases first and then decreases. Furthermore, the specimens of basalt fibers with a length of 12 mm and 18 mm are significantly higher than the specimens without fibers, with the maximum increase of 40.9% and 37.3%, respectively. The punching shear resistance of concrete slab is best improved when the fiber length is 12 mm and the volume content is 0.4%. The calculation value of the punching shear bearing capacity of the code for design of concrete structures (GB 50010—2010) in China is more conservative than the test results. Considering the effect of preventing cracking of basalt fibers on the circumference of critical section, the calculation formula of the punching shear bearing capacity of the code is modified.

Key words: basalt fiber concrete slab, static punching shear test, bearing capacity calculation, fiber length, fiber volume content, finite element analysis

中图分类号:

TU528.572

王钧, 方雪琪, 焦裕榕, 崔梦麟. 玄武岩纤维混凝土板冲切试验与承载力分析[J]. 硅酸盐通报, 2023, 42(1): 100-110.

WANG Jun, FANG Xueqi, JIAO Yurong, CUI Menglin. Punching Shear Test and Bearing Capacity Analysis of Basalt Fiber Concrete Slab[J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2023, 42(1): 100-110.

参考文献

[1] 安国旗,施梦莹.某板柱结构地下车库坍塌分析[J].华北地震科学,2017,35(s1):46-50.
AN G Q, SHI M Y. Analysis on collapse of underground garage with a slab column structure[J]. North China Earthquake Sciences, 2017, 35(s1): 46-50 (in Chinese).
[2] GALVIS F, MIRANDA E, HERESI P. Preliminary statistics of collapsed buildings in Mexico city in the September 19, 2017 Puebla-morelos earthquake[R]. Palo Alto: Blume Earthquake Engineering Center, Stanford University, 2017, 10: 1-18.
[3] 孙海林,杨友喆,李易,等.地下室无梁楼盖抗倒塌设计思考[J].建筑结构,2020,50(14):1-9.
SUN H L, YANG Y Z, LI Y, et al. Design thinking on anti-collapse of beamless floor of the basement[J]. Building Structure, 2020, 50(14): 1-9 (in Chinese).
[4] ISUFI B, RELVAS J P, MARCHO C, et al. Behavior of flat slabs with partial use of high-performance fiber reinforced concrete under monotonic vertical loading[J]. Engineering Structures, 2022, 264: 114471.
[5] 单东萌,杨秋宁,毛明杰,等.钢纤维掺量对钢筋混凝土桥面板冲切性能影响[J].震灾防御技术,2019,14(3):584-590.
SHAN D M, YANG Q N, MAO M J, et al. Effect of steel fiber content on punching shear performance of reinforced concrete slab[J]. Technology for Earthquake Disaster Prevention, 2019, 14(3): 584-590 (in Chinese).
[6] NOORI A N, NUMAN H A. Behavior of sustainable reinforced concrete building containing waste plastic and fibers[J]. IOP Conference Series: Materials Science and Engineering, 2020, 870(1): 012094.
[7] KITANO Y, ITO H, SUZUKI S. Punching shear capacity of prestressed concrete slabs made of lightweight concrete mixed with short fibers[J]. Journal of Advanced Concrete Technology, 2021, 19(12): 1227-1244.
[8] 李安令,张朝辉,郭帅成,等.聚乙烯醇纤维增强水泥复合材料板的冲切性能[J].复合材料学报,2021,38(3):902-910.
LI A L, ZHANG Z H, GUO S C, et al. Punching performance of polyvinyl alcohol fiber reinforced cementitious composite slab[J]. Acta Materiae Compositae Sinica, 2021, 38(3): 902-910 (in Chinese).
[9] LABIB W A. Evaluation of hybrid fibre-reinforced concrete slabs in terms of punching shear[J]. Construction and Building Materials, 2020, 260: 119763.
[10] 吴晓斌.玄武岩纤维在土木工程中的应用研究进展[J].硅酸盐通报,2020,39(4):1043-1049+1056.
WU X B. Research progress on application of basalt fiber in civil engineering[J]. Bulletin of the Chinese Ceramic Society, 2020, 39(4): 1043-1049+1056 (in Chinese).
[11] 陈亚迪,洪丽,蒋津,等.水泥砂浆基体中玄武岩纤维的拔出试验研究[J].硅酸盐通报,2019,38(9):2985-2991.
CHEN Y D, HONG L, JIANG J, et al. Pull-out test study of basalt fiber in cement mortar matrix[J]. Bulletin of the Chinese Ceramic Society, 2019, 38(9): 2985-2991 (in Chinese).
[12] BRIK V B. Performance evaluation of basalt fibers and composite rebars as concrete reinforcement[J]. Tech Res Submitted to NCHRP-IDEA, 1999: 1-97.
[13] 王新忠,李传习,凌锦育,等.玄武岩纤维混凝土早期裂缝试验研究[J].硅酸盐通报,2017,36(11):3860-3866.
WANG X Z, LI C X, LING J Y, et al. Experimental study on early crack of basalt fiber reinforced concrete[J]. Bulletin of the Chinese Ceramic Society, 2017, 36(11): 3860-3866 (in Chinese).
[14] SUN X J, GAO Z, CAO P, et al. Mechanical properties tests and multiscale numerical simulations for basalt fiber reinforced concrete[J]. Construction and Building Materials, 2019, 202: 58-72.
[15] 周浩,贾彬,黄辉,等.玄武岩纤维混凝土抗压和抗折力学性能试验研究[J].工业建筑,2019,49(8):147-152.
ZHOU H, JIA B, HUANG H, et al. Experimental research and analysis on compressive and flexural behavior of basalt fiber reinforced concrete[J]. Industrial Construction, 2019, 49(8): 147-152 (in Chinese).
[16] 于泳,朱涵,朱学超,等.玄武岩纤维混凝土抗冲击性能研究[J].建筑结构学报,2015,36(s2):354-358.
YU Y, ZHU H, ZHU X C, et al. Study on impact resistance of basalt fiber reinforced concrete[J]. Journal of Building Structures, 2015, 36(s2): 354-358 (in Chinese).
[17] 王钧,薛鹤,李婷.混杂纤维高强自密实混凝土弯曲韧性试验[J].建筑科学与工程学报,2018,35(2):88-93.
WANG J, XUE H, LI T. Experiment on flexural toughness of high-strength self-compacting concrete with hybrid fiber[J]. Journal of Architecture and Civil Engineering, 2018, 35(2): 88-93 (in Chinese).
[18] 陈亚迪.纤维拔出试验及纤维增强水泥基材料宏观力学性能研究[D].合肥:合肥工业大学,2019.
CHEN Y D. Fiber pull-out test and macroscopic mechanical properties of fiber reinforced cement-based materials[D]. Hefei: Hefei University of Technology, 2019 (in Chinese).
[19] 国家质量监督检验检疫总局,中国国家标准化管理委员会.金属材料拉伸试验第1部分:室温试验方法:GB/T 228.1—2021[S].北京:中国标准出版社,2021.
General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, Standardization Administration. Tensile testing of metallic materials-part 1: room temperature test methods: GB/T 228.1—2021[S]. Beijing: China Standard Press, 2021 (in Chinese).
[20] 韦锋,任子华,张俊华.钢筋混凝土板柱节点抗冲切性能研究综述[J].建筑结构,2020,50(s2):499-505.
WEI F, REN Z H, ZHANG J H. State of the art of research on punching shear behavior of reinforced concrete slab-column connections[J]. Building Structure, 2020, 50(s2): 499-505 (in Chinese).
[21] 焦华喆,韩振宇,陈新明,等.玄武岩纤维对喷射混凝土力学性能及微观结构的影响机制[J].复合材料学报,2019,36(8):1926-1934.
JIAO H Z, HAN Z Y, CHEN X M, et al. Influence mechanism of basalt fibre on the toughness and microstructure of spray concrete[J]. Acta Materiae Compositae Sinica, 2019, 36(8): 1926-1934 (in Chinese).
[22] 陈峰宾,许斌,焦华喆,等.玄武岩纤维混凝土纤维分布及孔隙结构表征[J].中国矿业大学学报,2021,50(2):273-280.
CHEN F B, XU B, JIAO H Z, et al. Fiber distribution and pore structure characterization of basalt fiber reinforced concrete[J]. Journal of China University of Mining ＆ Technology, 2021, 50(2): 273-280 (in Chinese).
[23] 黄伟,张阳阳,葛进进,等.玄武岩纤维与纳米SiO₂增强混凝土力学性能研究和微观分析[J].混凝土与水泥制品,2022(4):55-58+63.
HUANG W,ZAHNG Y Y, GE J J, et al. Experimental study and microscopic analysis of the mechanical properties of basalt fiber and nano-SiO₂ reinforced concrete[J]. China Concrete and Cement Products, 2022(4): 55-58+63 (in Chinese).
[24] 中华人民共和国住房和城乡建设部.混凝土结构设计规范:GB 50010—2010[S].北京:中国建筑工业出版社,2011.
Ministry of Housing and Urban-Rural Development of the People’s Republic of China. Code for design of concrete structures: GB 50010—2010[S]. Beijing: China Architecture Industry Press, 2011 (in Chinese).
[25] 李兆鹏,毛明杰,杨秋宁.配筋率对钢筋混凝土桥面板冲切承载力的影响[J].工业建筑,2020,50(5):44-51+176.
LI Z P, MAO M J, YANG Q N. Effect of reinforcement ratio on punching capacity of reinforced concrete bridge deck[J]. Industrial Construction, 2020, 50(5): 44-51+176 (in Chinese).