复合型陶瓷薄板的制备及其力学性能

硅酸盐通报 ›› 2022, Vol. 41 ›› Issue (12): 4419-4424.

所属专题：陶瓷

复合型陶瓷薄板的制备及其力学性能

张帅¹, 胡肄琛¹, 牛文芳¹, 张晨蕾¹

1.陕西科技大学材料科学与工程学院,西安 710021;
2.蒙娜丽莎集团股份有限公司,佛山 528211

收稿日期:2022-07-17 修订日期:2022-08-22 出版日期:2022-12-15 发布日期:2023-01-11
通信作者: 黄剑锋,博士,教授。E-mail:huangjf@sust.edu.cn
作者简介:钟辛子(1997—),男,博士研究生。主要从事陶瓷基复合材料的研究。E-mail:1379001819@qq.com
基金资助:
国家自然科学基金(52073166,52172049);陕西省国际科技合作项目重点计划(2020KW-038,2020GHJD-04);陕西省科学技术资源共享平台(第2020PT-022号)

Preparation and Mechanical Properties of CompositeThin Ceramic Tile

ZHONG Xinzi^1,2, CAO Liyun¹, HUANG Jianfeng^1,2, LIU Yijun², WANG Dongping¹, JI Yu¹, ZHANG Shuai¹, HU Yichen¹, NIU Wenfang¹, ZHANG Chenlei¹

1. School of Material Science and Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China;
2. Mona Lisa Group Co., Ltd., Foshan 528211, China

Received:2022-07-17 Revised:2022-08-22 Online:2022-12-15 Published:2023-01-11

摘要/Abstract

摘要： 作为一种轻薄、低能耗的功能化产品,陶瓷薄板因强度低而应用受限,如何对其进行低成本增强成为工业领域研究热点。本文以构筑“纤维布-黏结剂-陶瓷薄板”多层复合结构作为切入点,将多种工业级纤维布、黏结剂和陶瓷薄板进行二次后加工复合,制备了兼具低成本和优异力学性能的复合型陶瓷薄板,探究了其断裂面微观形貌及断裂机理。经研究表明,“碳纤维布-环氧树脂-陶瓷薄板”复合型陶瓷薄板具有最佳界面结合强度及力学性能,其抗弯强度和承载冲击能量分别为85.26 MPa和1.45 J,与陶瓷薄板坯体相比,性能提升幅度分别高达22.98%和141.67%。“纤维布-黏结剂-陶瓷薄板”多层复合结构能够有效提升陶瓷薄板综合力学性能,陶瓷薄板内部存在微裂纹拓展、纤维偏转等多种良性强韧化机制。

关键词: 陶瓷薄板, 复合结构, 纤维布, 黏结剂, 断裂机理, 力学性能

Abstract: Thin ceramic tiles are functional products with low energy consumption, but their application is limited by high breakage rate caused by low strength. In this case, it has become a research hotspot in ceramic industries to strengthen thin ceramic tiles with low cost. In this study, various kinds of fabrics and binders were optimized to prepare fabrics reinforced thin ceramic tiles with layered composite structure, which was proved to have low cost and excellent mechanical properties. Besides, the apparent morphology of cross-section and the fracture mechanism were investigated, respectively. It is observed that the composite thin ceramic tile with carbon fabric and epoxy resin as reinforcements has the best interface bonding strength and mechanical properties. And its bending strength is 85.26 MPa and the impact energy is 1.45 J, which are 22.98% and 141.67% higher than those of thin ceramic tiles green body. There are many positive strengthening and toughening mechanisms, such as microcrack expansion, fiber deflection and so on, which are conducive to improving the mechanical properties of thin ceramic tiles with fabrics and binders.

Key words: thin ceramic tile, composite structure, fabric, binder, fracture mechanism, mechanical property

中图分类号:

TB332

张帅, 胡肄琛, 牛文芳, 张晨蕾. 复合型陶瓷薄板的制备及其力学性能[J]. 硅酸盐通报, 2022, 41(12): 4419-4424.

ZHONG Xinzi, CAO Liyun, HUANG Jianfeng, LIU Yijun, WANG Dongping, JI Yu, ZHANG Shuai, HU Yichen, NIU Wenfang, ZHANG Chenlei. Preparation and Mechanical Properties of CompositeThin Ceramic Tile[J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2022, 41(12): 4419-4424.

参考文献

[1] ZANELLI C, CONTE S, MOLINARI C, et al. Waste recycling in ceramic tiles: a technological outlook[J]. Resources, Conservation and Recycling, 2021, 168: 105289.
[2] TORRE V, RAMBALDI E, MASI G, et al. Validation of antibacterial systems for sustainable ceramic tiles[J]. Coatings, 2021, 11(11): 1409.
[3] ZHONG X Z, CAO L Y, HUANG J F, et al. Formula optimization and mechanical properties of thin porcelain ceramic plates mainly containing smoky quartz tailings[J]. Ceramics International, 2022, 48(16): 24056-24062.
[4] MIRANDA G V, RODRIGUES NETO J B, BERNARDIN A M. Hydro deformation in ceramic tiles at the pre-firing stage[J]. Journal of the European Ceramic Society, 2021, 41(14): 7311-7320.
[5] SILVA A L, DONDI M, RAIMONDO M, et al. Photocatalytic ceramic tiles: challenges and technological solutions[J]. Journal of the European Ceramic Society, 2018, 38(4): 1002-1017.
[6] SUN Y, WU T Y, BAO Y W, et al. Preparation and strengthening mechanism of prestressed ceramic tile components[J]. International Journal of Applied Ceramic Technology, 2022, 19(1): 604-611.
[7] SILVA A L, FELTRIN J, DAL B M, et al. Effect of reduction of thickness on microstructure and properties of porcelain stoneware tiles[J]. Ceramics International, 2014, 40(9): 14693-14699.
[8] 张电,刘一军,同继锋,等.ZrO₂短纤维增强体相变及对瓷质陶瓷性能的影响[J].建筑材料学报,2017,20(6):909-913.
ZHANG D, LIU Y J, TONG J F, et al. Phase transition and influence of short ZrO₂ fiber as reinforcement on properties of porcelain[J]. Journal of Building Materials, 2017, 20(6): 909-913 (in Chinese).
[9] GAO Y Q, ZHANG L F, WANG X W, et al. Interfacial characterization of an oxide fiber-reinforced silica matrix composite containing a single layer pyrocarbon interphase[J]. Ceramics International, 2016, 42(5): 6504-6509.
[10] HIREMATH N, MAYS J, BHAT G. Recent developments in carbon fibers and carbon nanotube-based fibers: a review[J]. Polymer Reviews, 2017, 57(2): 339-368.
[11] DENG Y, LI W G, WANG X R, et al. Temperature-dependent tensile strength model for 2D woven fiber reinforced ceramic matrix composites[J]. Journal of the American Ceramic Society, 2018, 101(11): 5157-5165.
[12] CAPRICHO J C, FOX B, HAMEED N. Multifunctionality in epoxy resins[J]. Polymer Reviews, 2020, 60(1): 1-41.
[13] DONG M, ZHANG H, TZOUNIS L, et al. Multifunctional epoxy nanocomposites reinforced by two-dimensional materials: a review[J]. Carbon, 2021, 185: 57-81.
[14] GU H B, MA C, GU J W, et al. An overview of multifunctional epoxy nanocomposites[J]. Journal of Materials Chemistry C, 2016, 4(25): 5890-5906.
[15] FUERTES V, REINOSA J J, FERNÁNDEZ J F, et al. Engineered feldspar-based ceramics: a review of their potential in ceramic industry[J]. Journal of the European Ceramic Society, 2022, 42(2): 307-326.
[16] BAZZOCCHI F, BERTAGNI S, CIACCI C, et al. Mechanical characterisation of a low-thickness ceramic tile cladding subject to ageing phenomena[J]. Journal of Building Engineering, 2020, 29: 101105.
[17] LI T, CAO X X, WANG Q, et al. Numerical modeling of dynamic response and microcracking in shock-loaded polycrystalline transparent ceramic[J]. Journal of Applied Physics, 2021, 129(20): 205103.
[18] DROZDOV A V. Investigation on the microcracking of ceramic materials using the acoustic emission method[J]. Strength of Materials, 2014, 46(1): 71-79.
[19] SHAO Y F, SONG F, LIU B Y, et al. Observation of ceramic cracking during quenching[J]. Journal of the American Ceramic Society, 2017, 100(2): 520-523.
[20] SEVENER K M, TRACY J M, CHEN Z, et al. Crack opening behavior in ceramic matrix composites[J]. Journal of the American Ceramic Society, 2017, 100(10): 4734-4747.

复合型陶瓷薄板的制备及其力学性能

Preparation and Mechanical Properties of CompositeThin Ceramic Tile

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	陈娅, 万小梅, 崔允铮, 李辉. 纤维表面改性对EGC力学性能的影响[J]. 硅酸盐通报, 2023, 42(4): 1174-1182.
[2]	张虹宇, 郑玉龙, 陆春华. 两种养护制度下C100高强混凝土韧性对比试验研究[J]. 硅酸盐通报, 2023, 42(4): 1252-1259.
[3]	张劲竹, 刘华新, 王家贺, 柳根金, 王学志. 混杂纤维混凝土高温后性能劣化分析与强度预测[J]. 硅酸盐通报, 2023, 42(4): 1260-1269.
[4]	姜晓丹, 孙梦琪, 刘昂, 王攀, 侯东帅. 碳化对环氧树脂与混凝土界面黏结性能影响的分子模拟研究[J]. 硅酸盐通报, 2023, 42(4): 1291-1297.
[5]	胡彪, 李先海, 晏祥政, 赵永庆. 热活化煤矸石粉对基体-骨料界面过渡区性能的影响[J]. 硅酸盐通报, 2023, 42(4): 1315-1322.
[6]	葛成龙, 周海龙, 陈岩, 吕志刚. 不同MB值机制砂混凝土的性能和微观孔隙结构[J]. 硅酸盐通报, 2023, 42(3): 888-897.
[7]	刘德嵩, 杨忠德, 林鑫, 谢虎, 张菡欣, 王开, 黄守武, 刘振英. 轻质氧化镁含量对方镁石-镁铝尖晶石砖性能的影响[J]. 硅酸盐通报, 2023, 42(3): 1122-1129.
[8]	唐咸远, 马杰灵, 罗杰, 何滨冰, 陆澄剑. 钢渣微粉生态型超高性能混凝土力学性能影响因素分析[J]. 硅酸盐通报, 2023, 42(2): 607-617.
[9]	樊璐洋, 金子豪, 苏英, 崔程嘉, 王斌. 基于响应面法的半水磷石膏复合胶凝材料优化设计及性能研究[J]. 硅酸盐通报, 2023, 42(2): 626-636.
[10]	李思颖, 任子杰, 高惠民, 马骏辉, 杨云平, 吕阳, 李相国. 多源石墨固废制备电热板材配方试验研究[J]. 硅酸盐通报, 2023, 42(2): 637-643.
[11]	彭全敏, 陈炳蔚, 张彦, 鹿群, 刘洛源, 郭晓宇. 废PET塑料纤维对再生混凝土基本性能的影响[J]. 硅酸盐通报, 2023, 42(2): 666-673.
[12]	王晶, 陶耀华, 于康, 赵佳一, 庄凤明, 李辉. 混凝土帆布力学性能与应用研究进展[J]. 硅酸盐通报, 2023, 42(1): 22-30.
[13]	周凌峰, 林旭健, 王威. MgO活性对新型水化硅酸镁水泥性能的影响[J]. 硅酸盐通报, 2023, 42(1): 57-65.
[14]	李建林, 张智强, 余林文. 低密度碱矿渣发泡混凝土的制备及基本力学性能[J]. 硅酸盐通报, 2023, 42(1): 76-84.
[15]	冯春花, 陈钰, 黄益宏, 郭晖, 朱建平. 煤矸石骨料及其改性技术研究进展[J]. 硅酸盐通报, 2023, 42(1): 133-143.