基于储存稳定性的橡胶改性沥青制备工艺

硅酸盐通报 ›› 2021, Vol. 40 ›› Issue (9): 3168-3176.

基于储存稳定性的橡胶改性沥青制备工艺

杨德胜¹, 郭豪²

1.重庆市智翔铺道技术工程有限公司,重庆 400064;
2.贵州省交通规划勘测设计研究院股份有限公司,贵州 550009

收稿日期:2021-03-18 修回日期:2021-05-09 出版日期:2021-09-15 发布日期:2021-10-08
作者简介:杨德胜(1994—),男,工程师。主要从事公路养护设计与材料开发。E-mail:1554304727@qq.com

Preparation Process of Rubber Modified Asphalt Based on Storage Stability

YANG Desheng¹, GUO Hao²

1. Chongqing Zhixiang Pave Road Technology Engineering Co., Ltd., Chongqing 400064, China;
2. Guizhou Provincial Transportation Planning Survey and Design Institute Co., Ltd., Guizhou 550009, China

Received:2021-03-18 Revised:2021-05-09 Online:2021-09-15 Published:2021-10-08

摘要/Abstract

摘要： 为了制备储存稳定性良好的橡胶改性沥青,基于高温混炼工艺,使用聚苯乙烯-聚丁二烯-聚苯乙烯嵌段聚合物(SBS)、芳烃油、辛烯聚合物橡胶反应剂(TOR)、稳定剂与橡胶粉对基质沥青进行复合改性。提出了橡胶改性沥青的制备方法,分析了改性剂对沥青常规性能和流变特性的影响,并通过荧光试验观察改性剂在沥青中的分散效果。研究结果表明:添加质量分数为25%的40目(380 μm)胶粉可以明显提高沥青的高温性能;180 ℃下剪切60~90 min后溶胀发育60 min可以得到稳定性良好的橡胶改性沥青;加入相容剂和稳定剂可以提高胶粉的溶胀与分散程度,改性剂之间对沥青性能的影响存在协同作用;复合改性沥青具有良好的弹性恢复能力和高温抗变形性能;橡胶粉、SBS在沥青中的溶胀程度和分散均匀性是影响沥青常规性能和储存稳定性的直接因素。

关键词: 橡胶沥青, 制备工艺, 复合改性, 路用性能, 储存稳定性

Abstract: To prepare rubber modified asphalt with high storage stability, asphalt was composite modified with SBS, aromatic oil, TOR, stabilizer and rubber powder based on high temperature mixing process. The preparation method of rubber modified asphalt was proposed. The influence of modifiers on the general performance and rheological properties of asphalt were analyzed. The dispersion effect of the modifier in the asphalt was observed by the fluorescence test. The results show that the high temperature performance of asphalt is improved by adding 40 mesh (380 μm) rubber powder with a mass fraction of 25%. Storage stability of rubber asphalt is improved by shearing at 180 ℃ for 60 min to 90 min and then swelling 60 min. The degree of swelling and dispersion of rubber powder are improved by adding compatibilizers and stabilizers, and different modifiers have a synergistic effect on the asphalt performance. Composite modified asphalt has good elastic recovery ability and deformation resistance in high temperatures. The swelling degree and dispersion uniformity of rubber powder and SBS in asphalt are the direct factors to affect the general performance and storage stability of asphalt.

Key words: rubber asphalt, preparation process, compound modification, road performance, storage stability

中图分类号:

U414

杨德胜, 郭豪. 基于储存稳定性的橡胶改性沥青制备工艺[J]. 硅酸盐通报, 2021, 40(9): 3168-3176.

YANG Desheng, GUO Hao. Preparation Process of Rubber Modified Asphalt Based on Storage Stability[J]. BULLETIN OF THE CHINESE CERAMIC SOCIETY, 2021, 40(9): 3168-3176.

参考文献

[1] NAVARRO F J, PARTAL P, MARTÍNEZ-BOZA F, et al. Thermo-rheological behaviour and storage stability of ground tire rubber-modified bitumens[J]. Fuel, 2004, 83(14/15): 2041-2049.
[2] 曹卫东,刘树堂,房建果,等.硅烷偶联剂对橡胶沥青性能的影响[J].建筑材料学报,2009,12(4):497-500.
CAO W D, LIU S T, FANG J G, et al. Effect of silane coupling agent on properties of asphalt-rubber (AR) binders[J]. Journal of Building Materials, 2009, 12(4): 497-500 (in Chinese).
[3] 熊剑平,刘聪,张明月,等.基于聚辛烯/硫磺的橡胶沥青性能提升技术[J].长安大学学报(自然科学版),2020,40(1):77-86.
XIONG J P, LIU C, ZHANG M Y, et al. Performance improvement technical of rubber modified asphalt based on polyoctene/sulfur[J]. Journal of Chang'an University (Natural Science Edition), 2020, 40(1): 77-86 (in Chinese).
[4] 杨光.季冻区工厂化废橡胶粉/SBS复合改性沥青(CR/SBSCMA)及混合料性能研究[D].西安:长安大学,2016.
YANG G. Study on the performance of industrialized rubber/SBS composite modified asphalt (CR/SBSCMA) and asphalt mixture in seasonal freezing regions[D]. Xi'an: Chang'an University, 2016 (in Chinese).
[5] 李晓燕,平路,汪海年,等.基于国内外试验方法的橡胶沥青性能测试[J].交通运输工程学报,2015,15(1):10-17.
LI X Y, PING L, WANG H N, et al. Performance test of rubber asphalt based on domestic and abroad test methods[J]. Journal of Traffic and Transportation Engineering, 2015, 15(1): 10-17 (in Chinese).
[6] 张琛,汪海年,尤占平,等.橡胶沥青混合料和易性与压实特性的相关性[J].东南大学学报(自然科学版),2016,46(1):202-208.
ZHANG C, WANG H N, YOU Z P, et al. Correlation between workability and compaction property of rubber asphalt mixture[J]. Journal of Southeast University (Natural Science Edition), 2016, 46(1): 202-208 (in Chinese).
[7] 陶国良,纪波印,胡延东,等.废旧橡胶热-机械剪切脱硫过程及机理[J].高分子材料科学与工程,2012,28(10):102-105.
TAO G L, JI B Y, HU Y D, et al. Mechanism of thermal-mechanical shearing devulcanization of waste rubber[J]. Polymer Materials Science & Engineering, 2012, 28(10): 102-105 (in Chinese).
[8] 李波,王静,曹贵,等.废旧胶粉特性对橡胶沥青高温性能的影响机理[J].应用基础与工程科学学报,2017,25(2):347-355.
LI B, WANG J, CAO G, et al. Influence mechanism of crumb rubber characteristics on high-temperature performance for rubber modified asphalt binder[J]. Journal of Basic Science and Engineering, 2017, 25(2): 347-355 (in Chinese).
[9] 陈华鑫,贺孟霜,纪鑫和,等.沥青性能与沥青组分的灰色关联分析[J].长安大学学报(自然科学版),2014,34(3):1-6.
CHEN H X, HE M S, JI X H, et al. Gray correlation analysis of asphalt performance and four fractions[J]. Journal of Chang'an University (Natural Science Edition), 2014, 34(3): 1-6 (in Chinese).
[10] 中华人民共和国交通部.公路沥青路面施工技术规范:JTG F 40—2004[S].北京:人民交通出版社,2004.
Ministry of Communications of the People's Republic of China. Technical code for construction of highway asphalt pavement: JTG F 40—2004[S]. Beijing: People's Communications Press, 2004 (in Chinese).
[11] 李志刚,邓思奇,谭发茂,等.杜仲胶改性橡胶粉的混炼制备温度与时间参数分析[J].东南大学学报(自然科学版),2020,50(6):1109-1114.
LI Z G, DENG S Q, TAN F M, et al. Analysis on temperature and time for mixing preparation of crumb rubber modified by eucommia ulmoides gum[J]. Journal of Southeast University (Natural Science Edition), 2020, 50(6): 1109-1114 (in Chinese).

[1]	栗培龙, 王霄, 孙胜飞, 马云飞. 不同制备方法的橡胶沥青黏度特性对比分析[J]. 硅酸盐通报, 2021, 40(9): 3159-3167.
[2]	雷润祥, 王永吉, 张富奎. 石墨烯复合橡胶改性沥青路面性能研究[J]. 硅酸盐通报, 2021, 40(9): 3177-3184.
[3]	张荣, 王彬. 复掺芳纶纤维和玻璃纤维再生沥青混合料路用性能研究[J]. 硅酸盐通报, 2021, 40(8): 2794-2802.
[4]	郭寅川, 张争明, 邵东野, 石小鹏, 王路生, 王军茂. 高模量天然沥青混合料设计及路用性能对比研究[J]. 硅酸盐通报, 2021, 40(8): 2811-2821.
[5]	李宝玉. 石墨烯/聚乙烯复合改性沥青胶结料的流变性能研究[J]. 硅酸盐通报, 2021, 40(7): 2461-2468.
[6]	赵妤, 朱桂花, 吕硕, 张盼, 吴美玲. 金属/粉煤灰基球形复合定形相变材料釉质涂层制备工艺[J]. 硅酸盐通报, 2021, 40(2): 645-652.
[7]	刘合锋, 田周义, 许辉, 寇小舟, 韩森. 沥青混合料补强剂的路用性能研究及应用[J]. 硅酸盐通报, 2021, 40(2): 683-691.
[8]	张彩利, 王超, 李松, 丁维哲, 唐秀明. 钢渣沥青混合料水稳定性研究[J]. 硅酸盐通报, 2021, 40(1): 207-214.
[9]	张婧丽. 玄武岩短切纤维对环氧沥青及其混合料性能的影响[J]. 硅酸盐通报, 2020, 39(9): 3032-3039.
[10]	张庆;侯德华;史纪村;尚波;刘廷国. 混杂废旧纤维对乳化沥青冷再生混合料的性能优化研究[J]. 硅酸盐通报, 2020, 39(8): 2662-2671.
[11]	谢祥兵;马鹏;梁林园;童申家;李广慧. 纳米TiO2协同纳米ZnO/SBS复合改性沥青耐紫外光老化性能评价[J]. 硅酸盐通报, 2020, 39(7): 2354-2361.
[12]	张春梅;蔡靖轩;徐豪;程小伟;张凤. 汽车尾气净化用多孔氧化铝陶瓷制备技术研究进展[J]. 硅酸盐通报, 2020, 39(6): 1902-1908.
[13]	娄广辉;金彪;姜卫国;王治. 利用煤矸石制备泡沫陶瓷的研究[J]. 硅酸盐通报, 2020, 39(4): 1272-1276.
[14]	雷杰;吴浪;江枫;杨远波;张海洋;康泽. 制备工艺对重晶石-硼硅酸盐玻璃陶瓷结构及性能的影响[J]. 硅酸盐通报, 2020, 39(4): 1289-1295.
[15]	蒋应军;上官宇浩;李启龙;易勇. 彩色热反射喷涂材料路用性能[J]. 硅酸盐通报, 2020, 39(4): 1324-1330.