[1] 王秦生.超硬材料及制品[M].郑州:郑州大学出版社,2006:35-38. WANG Q S. Superhard materials and products[M]. Zhengzhou: Zhengzhou University Press, 2006: 35-38 (in Chinese). [2] 李志宏.陶瓷磨具制造[M].北京:中国标准出版社,2000:25-30. LI Z H. Ceramic abrasive tool manufacturing[M]. Beijing: China Standard Press, 2000: 25-30 (in Chinese). [3] 张爱菊.立方氮化硼基陶瓷复合材料的研究[D].天津:天津大学,2009:65-75. ZHANG A J. Research of cubic boron nitride (CBN) matrix ceramic composite[D]. Tianjin: Tianjin University, 2009: 65-75 (in Chinese). [4] ZHANG A J, LI Z H, LI Z C, et al. Raw materials selection applied to glass bonding for vitrified CBN grinding wheels[J]. Journal of Materials Science, 2008, 43(12): 4303-4308. [5] ZHANG A J, LI Z H, LI Z C, et al. Preparation of microcrystalline CBN abrasive[J]. Key Engineering Materials, 2008, 368/369/370/371/372: 933-935. [6] 王小平.金刚石薄膜电致发光特性研究[D].郑州:郑州大学,2002:36-46. WANG X P. Study on electroluminescence characteristics of diamond thin films[D]. Zhengzhou: Zhengzhou University, 2002: 36-46 (in Chinese). [7] 冯丹丹.电子封装用金刚石复合材料的制备及导热性能研究[D].天津:天津大学,2018:17-31. FENG D D. Preparation and thermal conductivity property of diamond composites for electronic packaging[D]. Tianjin: Tianjin University, 2018: 17-31 (in Chinese). [8] 谭秋虹,赵玉成,王明智,等.纳米稀土氧化物对陶瓷结合剂的强韧化[J].金刚石与磨料磨具工程,2018,38(6):19-24. TAN Q H, ZHAO Y C, WANG M Z, et al. Improving strength and toughness of vitrified bond by adding nano-rare earth oxides[J]. Diamond & Abrasives Engineering, 2018, 38(6): 19-24 (in Chinese). [9] 万 明.RO及R2O对金刚石砂轮陶瓷结合剂性能的影响[D].秦皇岛:燕山大学,2018:25-45. WAN M. Effect of RO and R2O on the properties of vitrified bond of diamond wheel[D]. Qinhuangdao: Yanshan University, 2018: 25-45 (in Chinese). [10] 许鹏飞,尹育航,杨佳乐,等.钛粉掺量对陶瓷结合剂金刚石磨具性能的影响[J].人工晶体学报,2019,48(10):1886-1890+1897. XU P F, YIN Y H, YANG J L, et al. Effect of titanium powder additive on properties of ceramic bond diamond abrasives[J]. Journal of Synthetic Crystals, 2019, 48(10): 1886-1890+1897 (in Chinese). [11] 贾昆仑,刘世凯,王韶川,等.添加钛酸盐纳米线对陶瓷结合剂性能的影响[J].金刚石与磨料磨具工程,2019,39(3):7-12. JIA K L, LIU S K, WANG S C, et al. Effect of titanate nanowires on properties of vitrified bonds[J]. Diamond & Abrasives Engineering, 2019, 39(3): 7-12 (in Chinese). [12] 李子成,张爱菊,李志宏.涂覆类CBN磨料性能研究[J].硅酸盐通报,2018,37(4):1207-1212. LI Z C, ZHANG A J, LI Z H. Comparison of CBN abrasive with different coatings[J]. Bulletin of the Chinese Ceramic Society, 2018, 37(4): 1207-1212 (in Chinese). [13] 李子成,张爱菊,李志宏.玻璃涂覆CBN磨料的制备及其应用[J].硅酸盐通报,2018,37(11):3570-3574. LI Z C, ZHANG A J, LI Z H. Preparation and application of glass coated CBN abrasive[J]. Bulletin of the Chinese Ceramic Society, 2018, 37(11): 3570-3574 (in Chinese). [14] ZHANG A J, LI Z H, LI Z C, et al. Preparation and characterization of SiO2-Al2O3-Na2O glass coated CBN abrasive particles via sol-gel route[J]. Journal of Sol-Gel Science and Technology, 2008, 49(1): 6-11. [15] 童震松,沈卓身,邢 奕.镀钛金刚石增强玻璃基复合材料的性能[J].北京科技大学学报,2014,36(7):946-951. TONG Z S, SHEN Z S, XING Y. Properties of Ti-coated diamond-reinforced glass matrix composites[J]. Journal of University of Science and Technology Beijing, 2014, 36(7): 946-951 (in Chinese). [16] 洪 秋,万 隆,李建伟.溶胶-凝胶法制备金刚石/陶瓷结合剂复合烧结体及其性能表征[J].材料工程,2019,47(12):130-135. HONG Q, WAN L, LI J W. Preparation of diamond/vitrified bond composite sintered by sol-gel method and its performance characterization[J]. Journal of Materials Engineering, 2019, 47(12): 130-135 (in Chinese). [17] 胡 晓,程 寓,袁 勤,等.微波烧结制备陶瓷结合剂金刚石砂轮的研究[J].陶瓷学报,2019,40(2):191-195. HU X, CHENG Y, YUAN Q, et al. Preparation of vitrified bond diamond grinding wheels by microwave sintering[J]. Journal of Ceramics, 2019, 40(2): 191-195 (in Chinese). [18] BRIGGS D, SEAH M. Practical surface analysis[M]. New York: Wiley, 1990. [19] SONG J, CHENG S H, LI H D, et al. A novel surface-enhanced Raman scattering substrate: diamond nanopit infilled with gold nanoparticle[J]. Materials Letters, 2014, 135: 214-217. |