欢迎访问《硅酸盐通报》官方网站,今天是

硅酸盐通报 ›› 2017, Vol. 36 ›› Issue (5): 1661-1666.

• • 上一篇    下一篇

掺减水剂钼尾矿胶砂的力学性能和水化产物

崔孝炜;狄燕清;南宁;刘璇;周春生   

  1. 商洛学院化学工程与现代材料学院,商洛 726000;陕西省尾矿资源综合利用重点实验室,商洛 726000
  • 出版日期:2017-05-15 发布日期:2021-01-18
  • 基金资助:
    商洛市科技计划项目(SK2014-01-03)%陕西省尾矿资源综合利用重点实验室开放基金(2014SKY-WK017)

Mechanical Properties and Hydration Products of Molybdenum Tailings Based Mortars with Super Plasticizer

CUI Xiao-wei;DI Yan-qing;NAN Ning;LIU Xuan;ZHOU Chun-sheng   

  • Online:2017-05-15 Published:2021-01-18

摘要: 将钼尾矿、矿渣、熟料、石膏进行机械力粉磨,制备胶凝材料,研究了减水剂种类和掺量对胶砂力学性能的影响,并对掺钼尾矿胶凝材料的水化产物进行了分析.结果表明,在相同流动度条件下制备胶砂试块,PC减水剂对掺钼尾矿胶砂的强度提高幅度最大,FDN次之,UNF-5最小.当PC高效减水剂掺量为0.4%时,大掺量尾矿胶砂试块28 d的抗压强度可以达到48.8 MPa.粉磨后的钼尾矿表现出一定的火山灰反应活性.掺钼尾矿胶凝材料的水化产物主要是钙矾石和水化硅酸钙凝胶.

关键词: 钼尾矿;减水剂;胶砂试块;水化产物

Abstract: A cementitious material was prepared with blended powders including molybdenum tailings, slag, clinker and gypsum.The effect of different types and dosage of super plasticizer on strengths and hydration products of molybdenum-tailing-based mortars was studied.The results indicate that the strength of mortars with the same fluidity is improved when super plasticizer is present in samples.The biggest improvement is PC super plasticizer, next one is FDN and the last one is UNF-5.When the dosage of PC super plasticizer is 0.4%, the compressive strength of molybdenum-tailing-based mortars is high up to 48.8 MPa at 28 d.The ground molybdenum tailings have a certain reactivity in the studied system.The hydration products of cementitious materials prepared with molybdenum tailings are mainly ettringite and C-S-H gel.

Key words: molybdenum tailings;super plasticizer;mortar;hydration product

中图分类号: